2025 Audi A5/Q5/S5 Gearbox Warning Lamp P060A00

Owners of certain 2025 Audi A5, Q5, and S5 models may experience a gearbox warning lamp illuminating in the instrument cluster. This issue, which can also manifest as a drive system fault, is addressed by Audi Technical Service Bulletin (TSB) 2080077/1. This bulletin outlines a software update designed to resolve the underlying control module malfunctions.

The presence of the gearbox warning lamp, particularly when accompanied by diagnostic trouble codes (DTCs) such as P060A00, indicates a specific internal issue within the vehicle's transmission electronics. This TSB provides a clear path for Audi service technicians to diagnose and rectify this condition, ensuring proper vehicle operation and preventing potential repeat repairs.

Symptoms

The primary symptom reported by owners is the illumination of a gearbox warning lamp in the instrument cluster. This visual alert indicates a detected fault within the vehicle's transmission system. While some owners may directly observe this warning, technicians might also identify the underlying issue through diagnostic scans, even without a specific customer complaint, if related DTCs are present.

Fault Codes / DTCs

When diagnosing the gearbox warning lamp or drive system fault, technicians may find specific Diagnostic Trouble Codes (DTCs) logged in the vehicle's control units. These codes pinpoint the exact nature of the malfunction:

• P060A00: This code indicates a "Control module internal processor monitoring malfunction" (symptom 20899). It is typically logged in the transmission electronics control unit J217 (diagnostic address 0002). This suggests an internal issue with the processor responsible for monitoring the transmission's operations.
• P1FD700: This code signifies a "Transmission control module warning light request active" (symptom 385025). It is logged in the control unit for drive system and running gear functions J1312 (diagnostic address 812C). This DTC confirms that the transmission control module is actively requesting the illumination of the warning lamp due to a detected fault.

The presence of either or both of these DTCs, especially P060A00, is a key indicator that the vehicle requires the software update described in TSB 2080077/1.

Diagnosis and Trigger Conditions

To accurately diagnose this issue, technicians are instructed to first attempt to reproduce the customer's complaint. This helps ensure that the specific problem aligns with the conditions addressed by TSB 2080077/1. Diagnostic scans will then confirm the presence of DTC P060A00 in the automatic gearbox control unit J217, or P1FD700 in the control unit for drive system and running gear functions J1312.

It is crucial that the repair is only performed if all specific criteria of the TSB are met, including the correct model, type, chassis number, engine, gearbox code, and current software version. Failing to precisely match these criteria could lead to the problem persisting, necessitating repeat repairs, and potentially invalidating warranty claims for the service performed.

Important Warnings for Owners and Technicians

Audi has provided critical advisories within TSB 2080077/1 that both owners and service technicians should heed:

• "Try to reproduce the customer complaint (based on the description/cause of the issue), so that it can be clearly assigned to this TSB. The following repair must only be carried out if all the criteria (model/type, chassis number, engine/motor, gearbox code, PR number(s), part number, software version, code, etc.) apply exactly. Otherwise, this solution will not eliminate the problem and repeat repairs may be necessary. In such a case, the warranty claim may be rejected, and the cost of the parts may be charged back."
• "Please remove all electronic auxiliary equipment (e.g. electronic tachograph at OBD socket) from the vehicle. This equipment could have an impact on the vehicle electronics, triggering this complaint."

These warnings emphasize the importance of precise diagnosis and adherence to the bulletin's guidelines to ensure an effective repair and prevent unnecessary costs or complications.

Repair Procedure Summary

The prescribed solution for the Audi gearbox warning P060A00 and P1FD700 fault is a combined software update. This update targets various control units within the vehicle to optimize their operation and resolve the internal processor monitoring malfunction.

Before initiating the software update, technicians must ensure that any electronic auxiliary equipment connected to the vehicle's OBD port, such as electronic tachographs, is removed. Such devices can interfere with the vehicle's electronics and potentially trigger or exacerbate the complaint. The update process itself typically involves connecting a battery charger to maintain stable voltage during the flashing procedure. Technicians should also check for the visibility of a related TSB, 2079690, which covers combined software updates, to ensure all necessary preliminary steps are followed.

Owner Action

If you own a 2025 Audi A5, Q5, or S5 and experience the gearbox warning lamp illuminating in your instrument cluster, or suspect a drive system fault, it is recommended to contact your authorized Audi service facility. Inform them about the symptoms and mention the potential relevance of TSB 2080077/1.

The service center will perform diagnostic checks to confirm the presence of DTCs like P060A00 or P1FD700 and determine if your vehicle qualifies for the software update. Since this is a software-related repair, it is typically covered under warranty, provided the vehicle meets the specific criteria outlined in the TSB. Ensure that any aftermarket electronic devices connected to your vehicle's diagnostic port are removed before your service appointment.

Warranty Information

Audi's Technical Service Bulletin 2080077/1 provides specific guidelines for warranty claims related to this software update. The repair is generally covered under warranty, but if the vehicle is outside of its warranty period, the TSB serves as informational guidance only. The service number for this repair is 3410, and the damage code is KD02.

Labor operations for this software update include 0151 0010 for the software update itself, which includes connecting a battery charger, and 0151 0040 for a fixed rate covering all preliminary and follow-up work, such as bus sleep cycles, calibration drives, and restarting the software update if flashing is interrupted. All warranty claims must adhere to the Audi Warranty Policies and Procedures Manual and are subject to review.

---

Source: NHTSA ID: 11026281