Volkswagen · Model Report
Showing safety data for the 2014 model year only.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2012-2015 Passat, 2011-2014 Golf A6, and 2011-2013 Audi A3 diesel vehicles, thought to have been previously repaired under one of the Takata air bag recalls. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2012-2016 Eos, 2012 Passat, 2012-2016 CC, 2015-2016 e-Golf, 2011-2015 Touareg, 2012-2015 and 2017 Tiguan, and 2011-2016 Golf and 2011-2013 GTI vehicles. Modifications made while the vehicles were in an internal evaluation period may cause the affected vehicles to not comply with all of the applicable regulatory requirements.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2009-2014 Volkswagen CC, 2010-2014 Golf, 2010-2014 Eos, 2007-2010 Passat Sedan and Wagon, and 2012-2014 Passat vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2010-2014 Golf, 2007-2010 Passat sedans and wagon, 2012-2014 Passat sedan and Eos, 2009-2014 CC, 2009-2012 Audi Q5, 2010-2012 S5 Cabriolet and 2010-2012 Audi A5 Cabriolet vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2010-2014 Volkswagen CC, and Passat, 2010-2013 Eos, 2011-2014 Golf, GTI, Jetta, and Tiguan, and 2012-2014 Jetta Sportwagen vehicles. In the affected vehicles, debris may contaminate the air bag clock spring, a spiral wound, flat cable that keeps the air bag powered while the steering wheel is being turned. This contamination may tear the cable and result in a loss of electrical connection to the driver's frontal air bag.
Driving down the road as normal and heard a loud noise. My sunroof combusted and got glass everywhere. Nothing hit it, there is no damage to the rest of the car, but the sunroof shattered.
No injuries · No fire · No crash
My vehicle has (2) serpentine belts, and (2) Belt Tensioners. (1) Tensioner is for the belt that engages the Water Pump, Alternator, Power Steering and then has (3) Idler Pulleys. The other one is the AC Tensioner, that belt routes from the AC Compressor to the Crank and the AC Tensioner. The AC Compressor is a dual belt pulley. So the AC Tensioner is suppling the power for the Accessory Belt to spin, and operate the cooling system, charging system, and power steering. Recently the Accessory Belt ripped, and since the belts and the tensioners have yet to be serviced, I planned on doing both tensioners and belts. Upon replacing the components with new ones, the AC tensioner rubs against the Accessory Belt, which will def cause the belt to rip. Further investigating, I saw the original AC Tensioner has a cut out on the side of the housing made, so that the Accessory Belt will not rub against it and spin freely. I called VW Service, O Reillys, Auto Zone, Advanced Auto, and none of the tensioners have the cut out, they all have the same tensioner that is being sold. So what do I do now? Vehicle is not drivable, and without the correct part, this vehicle is unable to safely drive. Once that belt rips, cooling system won’t work, charging system and power steering. My vehicle has almost 200K and is mechanically sound, I maintain the maintenance on this vehicle to a T. Yet I am unable to purchase a part that is needed to ensure this vehicle continues to operate safely, due to a complete engineering design mistake. In which it seems to be completely covered up, because how many people will really service the tensioner. Well I did, and I would like my vehicle to run again, seeing as how the manufacturer decided to make this shortcut, and cross there fingers and hope no issues arose
No injuries · No fire · No crash
While driving on the freeway the car stopped accelerating and would only rev when gas pedal was pressed. I coasted to the fast lane shoulder and put on hazard lights. CHP had to stop freeway traffic to push me to the side of the freeway. Car eventually restarted and let me put into gear. I drove to Auto repair store and they scanned car. Code U0103 came back: No communication with gear shift module.
No injuries · No fire · No crash
I'M HAVING ISSUES WITH A P0106 CODE. IT CONTINUOUSLY COMES OFF AND ON. I HAVE HAD THE MANIFOLD ABSOLUTE PRESSURE SENSOR REPLACED, I HAVE HAD THE INTAKE CLEANED AND RELATABLE PARTS. THE CHECK ENGINE LIGHT WILL COME ON AT RANDOM TIMES, AND WILL JUST GO AWAY ON IT'S OWN. I HAVE READ THAT MULTIPLE PEOPLE HAVE HAD TO UPDATE THE ECM WHICH HAS THEN FIXED THE ISSUE. I DON'T BELIEVE THIS SHOULD BE AN EXPENSE TO THE OWNER OF THE VEHICLE FOR AN UPDATE THAT SHOULD HAVE BEEN DONE IN THE FIRST PLACE.
No injuries · No fire · No crash
THE SLAVE CYLINDER WENT BAD ITS PORING FLUID OUT IT COMPLETELY FAILED WHEN THE VEHICLE WAS PARKED IT HAS EXACTLY 34,272 MILES IT SHOULD NOT HAVE FAILED AT THAT MILEAGE AND AGE I KNOW OF 3 OTHER PEOPLE AROUND THAT HAVE HAD THE SAME THING HAPPEN THIS NEEDS TO BE LOOKED INTO BECAUSE ITS STARTING TO LOOK LIKE A MANUFACTURING PROBLEM. THIS COULD HAVE BEEN FATAL IF IT HAD WENT OUT COMPLETELY ON THE HIGHWAY SINCE AN INEXPERIENCED DRIVER WOULDN'T KNOW WHAT TO DO SINCE YOU CANT CHANGE GEARS
No injuries · No fire · No crash