Nissan Murano Service Bulletins
577 manufacturer communications on file.
- March 22, 2016•Document ID: 10075089Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- NTB15-073B
- Date Added:
- June 22, 2016
- Manufacturer:
- NISSAN
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - March 15, 2016•Document ID: 10194204Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR:HANDLE:EXTERIOR; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- NTB16-028
- Date Added:
- May 24, 2021
- Manufacturer:
- NISSAN
SummaryIntelligent key buttons inoperative
Associated Products (3)Associated Documents - March 15, 2016•Document ID: 10075205Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- NTB16-028
- Date Added:
- June 22, 2016
- Manufacturer:
- NISSAN
SummaryINTELLIGENT KEY BUTTONS INOPERATIVE SERVICE INFORMATION If it appears for ONLY ONE OF the Intelligent Keys that all RKE lock/unlock/panic/trunk button functions of that specific Intelligent Key do not work BUT The doors will lock and unlock when pressing either front door request switch while using that particular Intelligent Key (see Figure 1 below) Figure 1 AND All the other Intelligent Keys for that vehicle function normally THEN That specific Intelligent Key may have become De-synchronized with the vehicle.
Associated Products (3)Associated Documents - March 10, 2016•Document ID: 10194201Service Bulletin/Repair InstructionsAIR BAGS:SENSOR:OCCUPANT CLASSIFICATION
- Mfr Comm. #:
- NTB16-025
- Date Added:
- May 24, 2021
- Manufacturer:
- NISSAN
SummaryAir Bag Diagnosis sensor unit coinfiguration
Associated Products (6)Associated Documents - March 10, 2016•Document ID: 10192771Service Bulletin/Repair InstructionsBACK OVER PREVENTION; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16025
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION If an Air Bag Diagnosis Sensor Unit is replaced and the configuration of the old unit could not be saved, use the Service Procedure in this bulletin to: - Load the VIN specific configuration file from your electronic parts catalog (FAST or equivalent) onto a portable USB storage device (thumb drive) - Plug the thumb drive into your CONSULT PC. - Configure the new Air Bag Diagnosis Sensor Unit using the file that you loaded onto the thumb drive. See this bulletin for further detail.
Associated Products (6)Associated Documents - March 10, 2016•Document ID: 10192769Service Bulletin/Repair InstructionsWHEELS; FUEL SYSTEM, GASOLINE; VISIBILITY; ENGINE AND ENGINE COOLING; STEERING; BACK OVER PREVENTION; ELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- NTB16023
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM A customer concern of while turning the steering wheel or when driving at low speed (straight or turning), a high pitch power steering noise can be heard. * Only while seated inside the vehicle And * With all of the windows up NOTE: If the audio and/or HVAC systems are turned ON it may be difficult to hear this issue. ACTION Install an Insulator onto the end of the power steering pump motor housing with the Service Procedure starting on the next page. Please see this bulletin for further details.
Associated Products (7)Associated Documents - March 10, 2016•Document ID: 10075202Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- NTB16-025
- Date Added:
- June 22, 2016
- Manufacturer:
- NISSAN
SummaryAIR BAG DIAGNOSIS SENSOR UNIT CONFIGURATION SERVICE INFORMATION If an Air Bag Diagnosis Sensor Unit is replaced and the configuration of the old unit could not be saved, use the Service Procedure in this bulletin to: Load the VIN specific configuration file from your electronic parts catalog (FAST or equivalent) onto a portable USB storage device (thumb drive). Plug the thumb drive into your CONSULT PC. Configure the new Air Bag Diagnosis Sensor Unit using the file that you loaded onto the thumb drive.
Associated Products (6)Associated Documents - March 8, 2016•Document ID: 10194199Service Bulletin/Repair InstructionsEQUIPMENT; STEERING
- Mfr Comm. #:
- NTB16-023
- Date Added:
- May 24, 2021
- Manufacturer:
- NISSAN
SummaryNissan; Power steering noise heard inside vehicle with windows closed
Associated Products (7)Associated Documents - March 4, 2016•Document ID: 10194183Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- NTB15-039A
- Date Added:
- May 24, 2021
- Manufacturer:
- NISSAN
Summary2015-2016 Murano; Side Door will not open or side door will not latch
Associated Products (2)Associated Documents - March 4, 2016•Document ID: 10192760Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB15039A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM: The following incident, or the customer reports this incident: The vehicle has been parked (not running) in below freezing temperatures for an extended period (such as overnight). Then The Intelligent Key, key fob, or mechanical key is used to perform door unlock. Then When attempting to open the door, the door will not open (using either outside or inside handle, or both), or the door will open, but will not latch when closed. Then The door lock and latch functions normallywhen the vehicle has warmed up (vehicle left in the sun, moved indoors, or driven for several minutes). NOTE: The above incident, if it should occur, could be confirmed or reported for one or more of the four side doors. ACTION: Refer to the REPAIR FLOW CHART on page 2. See this bulletin for further detail.
Associated Products (2)Associated Documents - March 4, 2016•Document ID: 10075084Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- NTB15-039A
- Date Added:
- June 22, 2016
- Manufacturer:
- NISSAN
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - March 2, 2016•Document ID: 10192758Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16021
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM: Any one or a combination of the following after opening and/or closing a door (as it applies): * The auto headlights do not time out after the ignition is set to the OFF position. * The interior lights do not come ON. * Rogue only: The radio will not turn OFF after ignition is turned OFF. * The Vehicle Information Display in the combination meter showing "door ajar" when the doors are closed. * The Remote Engine Start feature is inoperative. ACTION: 1. Remove, and then reinstall, the screw of all four (4) door switches. 2. Confirm whichever issue has been occurring is resolved. NOTE: If the issue(s) is still not resolved, refer to ASIST and the appropriate Electronic Service Manual (ESM) for further diagnosis. Please see this bulletin for further details.
Associated Products (5)Associated Documents - February 26, 2016•Document ID: 10192750Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- NTB03074J
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION Occasionally customers may notice water vapor or fog in the headlamps. The information, illustrations, and flow chart in this bulletin are provided to help you in determining if an incident for water/condensation in the headlamps is normal or not. Nissan?s new vehicle limited warranty does not cover physically damaged (cracked or broken) headlamps. All current headlamp assemblies are vented to the atmosphere (not sealed). - This is necessary to allow for expansion and contraction of air from temperature "variations" (warmer or colder) without damage to the headlamp. - Moisture in the air sometimes "travels" into and out of the headlamp assembly through these vents. - Certain environmental conditions may cause moisture to condense. - The fogging/cloudiness should disappear over time when the headlamp is in a dry environment. See this bulletin for further detail.
Associated Products (109)2016 Nissan 370Z2016 Nissan Altima2016 Nissan Frontier2016 Nissan GT-R2016 Nissan Juke2016 Nissan Leaf2016 Nissan Maxima2016 Nissan Murano2016 Nissan NV2016 Nissan NV2002016 Nissan Pathfinder2016 Nissan Quest2016 Nissan Rogue2016 Nissan Sentra2016 Nissan Titan2016 Nissan Versa2016 Nissan Versa Note2015 Nissan 370Z2015 Nissan Altima2015 Nissan Armada+ 89 moreAssociated Documents - February 22, 2016•Document ID: 10192744Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16018
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM The MIL is "ON" with DTC P0603 (ECM BACK UP/CIRCUIT). ACTION 1. Confirm that the battery voltage is 11 volts, or more, with the ignition ON (engine OFF, not running). 2. Erase DTC 3. Perform DTC confirmation steps in the Service Procedure. 4. Confirm 1st trip DTC P0603 is not stored. NOTE: P0603 is often the result of low battery voltage, discharged battery or battery terminal disconnections. Please see this bulletin for furtner details.
Associated Products (33)2016 Nissan 370Z2016 Nissan Altima2016 Nissan Frontier2016 Nissan GT-R2016 Nissan Juke2016 Nissan Maxima2016 Nissan Murano2016 Nissan NV2016 Nissan NV2002016 Nissan Pathfinder2016 Nissan Quest2016 Nissan Rogue2016 Nissan Sentra2016 Nissan Versa2016 Nissan Versa Note2015 Nissan 370Z2015 Nissan Altima2015 Nissan Armada2015 Nissan Frontier2015 Nissan GT-R+ 13 moreAssociated Documents - January 28, 2016•Document ID: 10192727Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- NTB09081C
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION The purpose of this bulletin is to give Nissan dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail.
Associated Products (183)2016 Nissan 370Z2016 Nissan Altima2016 Nissan Frontier2016 Nissan GT-R2016 Nissan Juke2016 Nissan Leaf2016 Nissan Maxima2016 Nissan Murano2016 Nissan NV2016 Nissan NV2002016 Nissan Pathfinder2016 Nissan Quest2016 Nissan Rogue2016 Nissan Sentra2016 Nissan Titan2016 Nissan Versa2016 Nissan Versa Note2015 Nissan 370Z2015 Nissan Altima2015 Nissan Armada+ 163 moreAssociated Documents - January 21, 2016•Document ID: 10192724Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB15031A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION Combination Meter Self-Learning After Replacement 2015 Murano Combination Meters have a learning function when first installed. IMPORTANT: Immediately after initial installation and ignition ON, the combination meter adapts to the way the vehicle is equipped. Performing self-learning can be done only once. Once done, it cannot be changed. CAUTION: Never install a combination meter from an ADAS equipped 2015 Murano into a non-ADAS equipped 2015 Murano, or vice versa, for testing purposes or any other reason. If this incident occurs, the combination meter will need to be replaced. See this bulletin for further detail.
Associated Products (3)Associated Documents - January 15, 2016•Document ID: 10192720Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16008
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION The function to detect the last item to trigger the vehicles theft alarm system can now be accessed with CONSULT-III plus (C-III plus). This function can be accessed by selecting: * Diagnosis (All Systems) or Diagnosis (One System). Then * BCM Then * THEFT ALM Then * Work Support Then * THEFT ALM TRG. See this bulletin for further details.
Associated Products (11)Associated Documents - January 4, 2016•Document ID: 10192717Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16002
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION Whenever all Intelligent Keys of an APPLIED VEHICLE are lost AND the BCM is in Transit Mode, the BCM does not need to be replaced when replacing the lost Intelligent Keys. When all of the following conditions of an APPLIED VEHICLE are verified: - The BCM is in Transit Mode. - The BCM will not respond to CONSULT-III plus (C-III plus). It does not show up on System Call. - All Intelligent Keys are lost. DO NOT replace the BCM or ECM when replacing the lost Intelligent Keys. The procedure in this bulletin will get the existing BCM out of Transit Mode. See this bulletin for further detail.
Associated Products (5)Associated Documents - January 4, 2016•Document ID: 10192714Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16001
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION When the BCM in an APPLIED VEHICLE is being replaced for any reason, all existing Intelligent Keys must be re-registered. If new Intelligent Keys are added to the existing Intelligent Keys at the same time the BCM is being replaced, the procedure in this bulletin must be followed. See this bulletin for further detail.
Associated Products (9)Associated Documents - December 17, 2015•Document ID: 10192708Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- PC419A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryThis activity will expire on December 18th, 2015. Dealers can continue to schedule and repair vehicles eligible for this service action until close of business December 18th, 2015. Claims will be honored for RO?s opened on or before the 18th of December.
Associated Products (6)Associated Documents