MINI · Model Report
MINI Cooper2025
Showing safety data for the 2025 model year only.
MINI · Model Report
Showing safety data for the 2025 model year only.
BMW of North America, LLC (BMW) is recalling certain 2025 Mini Cooper S, Mini Countryman S All4, X2, 2024 Rolls-Royce Spectre, 2023-2025 i7, 7 Series, X7, 2024-2025 i5, 5 Series, 2023-2024 XM, X1, 2024-2025 X6, and X5 vehicles. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
BMW of North America, LLC is recalling certain 2025-2026 X1 and X2, MINI Cooper Convertible, MINI Cooper, Mini Countryman S ALL4, and 2025 MINI Countryman SE ALL4 vehicles. The torsion bar in both front seat belt retractors may have been damaged during production.
BMW of North America (BMW) is recalling certain 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4, and 2025 MINI Hardtop 2 Door (Cooper, Cooper S) vehicles. Please refer to the recall report for the complete list of models. The welds in the servomotor of the integrated brake control module may break, causing a loss of power brake assist and rear brake function. In addition, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function.
BMW of North America, LLC. (BMW) is recalling certain 2023-2025 BMW, MINI, and Rolls-Royce vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Two things I noticed. 1. Going from a complete stop such as when waiting at a red light or stop sign, and then pressing the accelerator intermittently causes the vehicle to not respond. I see the power gauge max out but the car does not move and worse if on a hill will roll backwards before lurching forward. 2. When on the highway going 40-50 mph, I want to change lanes or pass someone, I press the accelerator and the car slows down/disengages before lurching forward. This makes tighter timing impossible and puts my safety at risk if I begin the lane change not anticipating the drop in speed/power from the car. I have taken the car to the service dept at Mini several times for this issue as it has been occuring since I purchased the vehicle. I was told no error codes were found.
No injuries · No fire · No crash
I had to take my car in to get serviced. The engine was rumbling loud and shaking. When they inspected the car, they found that one of the lower motor mounts was loose. BMW/Mini Service center of Dallas informed me that the bolt mounting the mount was “not tightened to factory specifications.”
No injuries · No fire · No crash
The contact owns a 2025 Mini Cooper S. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
No injuries · No fire · No crash
It has been almost 1 year and there is no remedy available for the important safety recall campaign no. 24V-104: Integrated Brake (IB) Module.
No injuries · No fire · No crash
The contact owns a 2025 Mini Cooper S. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
No injuries · No fire · No crash