Kia America, Inc. (Kia) is recalling certain 2010-2019 Borrego, 2014-2016 Cadenza, 2010-2013 Forte, Forte Koup, Sportage, 2015-2018 K900, 2011-2015 Optima, 2011-2013 Optima Hybrid, Soul, 2012-2017 Rio, 2011-2014 Sorento, and 2010-2011 Rondo vehicles. The Hydraulic Electronic Control Unit (HECU) may experience an electrical short, which can result in an engine compartment fire while parked or driving.
Kia Motors America (Kia) is recalling certain 2012-2016 Kia Soul vehicles equipped with 1.6L Gasoline Direct Injection (GDI) engines. High exhaust gas temperatures may damage the catalytic converter, possibly resulting in abnormal engine combustion and damage to one or more of the engine's pistons and possible piston connecting rod failure.
Kia Motors America (Kia) is recalling certain model year 2010-2013 Kia Soul vehicles manufactured January 8, 2009, to October 2, 2013, equipped with a sun roof. A headliner plate may detach during deployment of the curtain air bag.
I own a 2012 Kia Soul with approximately 99,000 miles. The vehicle has never been involved in an accident. During a recent inspection at an authorized Kia dealership, the technician discovered that the welds securing the steering-column mounting support to the cross-car structural support appear to have failed. The technician confirmed that the steering-column mounting bolts were properly tightened, yet the assembly exhibited significant movement. The dealership considers this a safety concern and recommends replacement of the entire structural support assembly at an estimated cost of $3,374.54. I am concerned that a structural component supporting the steering column has apparently failed in a vehicle with no collision history.
No injuries · No fire · No crash
2012 Kia Soul 1.6L GDI (VIN: [XXX]). Case #[XXX]. Safety Hazard Description: The vehicle experienced a sudden engine stalling event at highway speeds and repeatedly dropped into a restricted "Limp Mode" due to a recurring P1326 diagnostic code. This code is explicitly tied to Kia's Knock Sensor Detection System (KSDS) monitoring structural connecting rod bearing failure. The sudden loss of engine RPMs and throttle response created a severe traffic hazard, leaving me without power steering or predictable acceleration in active traffic. Dealer Information & System Non-Compliance: The vehicle is currently grounded and unsafe to drive. Southlake Kia (Merrillville, IN) verified that the vehicle's engine sensor and circuit are operating perfectly with an end-to-end wiring test reading at a flawless 0.2 OHMS (Repair Order #[XXX]). This mathematically confirms that the sensor is picking up real, severe internal mechanical vibrations from a failing engine block rather than an electrical short circuit. Official internal dealer records (R/O #[XXX]) prove that this severe engine defect initially manifested and was documented at 149,715 miles—strictly under the 150,000-mile extended federal class-action settlement threshold. Despite this clear history, the franchise dealership is actively refusing to open a factory Techline case or submit a Prior Work Authorization (PWA) to repair this safety defect, citing the vehicle's current odometer reading (152,142 miles). Kia Corporate has failed to override the dealer franchise or provide alternative transportation. The manufacturer is actively leaving an inherently dangerous, unserviceable vehicle on the road by refusing to honor a pre-existing condition documented within warranty limits. A formal dispute has been initiated with the BBB AUTO LINE (Case #[XXX]). INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
I purchased Dorman part #74015 Brake Pedal Stopper from AutoZone Altamonte after an employee recommended it for my 2012 Kia Soul without checking system compatibility. I installed it that night. On, while driving on a busy road in Orlando, FL, my brake pedal locked completely solid and could not be depressed. I had complete loss of braking and could not shift out of park. I was stranded in live traffic with cars swerving around me. I discovered the Dorman part is ∼10mm thick. The correct OEM Kia part 32876-2H000 is 8.0mm. The 2mm extra thickness caused my brake light switch to jam, which physically blocked the brake pedal arm. I had to pry the part out on the roadside to regain pedal movement. This created an extremely dangerous situation. I am now anxious to drive due to fear of brake failure. The part is sold as compatible with 2010-2016 Kia Souls but is too thick and disables the braking system. Vehicle repaired with correct OEM 8.0mm part. Issue has not recurred. I have photos of the failed part and installation.
No injuries · No fire · No crash
The contact owns a 2012 Kia Soul. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. No warning lights were illuminated. The vehicle was driven to the residence. The contact stated that the following day, while attempting to start the vehicle, the vehicle started, and the check engine warning light was off. The vehicle was taken to the dealer, where the contact was informed that the recall repair failure code was not illuminated. In addition, the contact was informed that the failure was not covered under a recall. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact received a recall notification, NHTSA Campaign Number: 19V120000 (Engine, Engine and Engine Cooling). The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 156,310.
No injuries · No fire · No crash
The brake lines on my car failed. I had to use the parking brake to get the car to stop. Typically, a brake failure leaves you with partial braking power, however, I had no brakes whatsoever. Upon inspection, it appears that all the brake lines failed in the same area, where the brakes are over the gas tank. For them all to fail at the same time in an area that is not accessible seems like the this must be prone to corrosion. Note that I regularly wash the car with undercarriage wash in the winters, as they salt extensively around here. I was going to sell the car, and the brakes failed on the test-drive. They had been working immediately before the test drive, as i had driven it around to make sure everything was in working order.
No injuries · No fire · No crash