Infiniti QX60 Service Bulletins
507 manufacturer communications on file.
- February 12, 2018•Document ID: 10130482Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB18-006
- Date Added:
- March 26, 2018
- Manufacturer:
- INFINITI
Summary2016-2017 QX60; VDC WARNING LAMP ON WITH DTC C1116 STORED This bulletin applies only to vehicles NOT equipped with Intelligent Cruise Control. IF YOU CONFIRM A current or past customer concern of the Vehicle Dynamic Control (VDC) warning light being ON with either a current or past DTC C1116 (STOP LAMP SW) stored. And Brake lamp switch operation has been confirmed as operating correctly. ACTION Install the harness jumper from the Parts Information using the Service Procedure starting on page 2.
Associated Products (2)Associated Documents - February 1, 2018•Document ID: 10130481Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- ITB18-005
- Date Added:
- March 26, 2018
- Manufacturer:
- INFINITI
SummaryADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION SERVICE INFORMATION If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures in the Electronic Service Manual (ESM) before replacing any parts. C1A03 ? VEHICLE SPEED SENSOR -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1A04 ? ABS/TCS/VDC SYSTEM -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1B01 CAM AIMING INCMP -The diagnostic procedure in the ESM includes check and, if needed, repair for LANE CAMERA DTCs before replacing ADAS components. -LANE CAMERA DTC may require adjustment of the lane camera. -If repairs/adjustments are performed for the Lane Camera; when compete, perform DTC Confirmation Procedure again before doing any additional repairs.
Associated Products (15)Associated Documents - January 26, 2018•Document ID: 10129109Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HATCHBACK/LIFTGATE; EQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- ITB17-043a
- Date Added:
- February 21, 2018
- Manufacturer:
- INFINITI
SummaryMOTION ACTIVATED LIFTGATE STICKER This bulletin has been amended to add model years to the Applied Vehicles and to update the part number in the Parts Information. Please discard the previous version of this bulletin.
Associated Products (2)Associated Documents - January 23, 2018•Document ID: 10129111Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- ITB18-003
- Date Added:
- February 21, 2018
- Manufacturer:
- INFINITI
SummaryREDUCED VEHICLE LOAD CAPACITY LABEL (REGULATORY REQUIREMENT) This bulletin applies to vehicles equipped with dealer installed or VPC installed accessories. SERVICE INFORMATION The National Highway Traffic Safety Administration (NHTSA) requires that any automobile dealer that installs accessories on a vehicle prior to first retail sale must install a special label (?reduced capacity label?) on that vehicle if the total weight of all accessories on that vehicle exceeds 1.5 percent of the vehicle?s gross vehicle weight rating (GVWR) or 100 pounds, whichever is less. This includes accessories that the dealer installs (dealer installed factory accessories and dealer installed aftermarket accessories), and accessories installed at the Vehicle Processing Center (VPC) prior to the vehicle being delivered to the dealer. IMPORTANT: Failure to comply with this requirement may result in penalties imposed by NHTSA. Follow the instructions in this bulletin to help meet these requirements.
Associated Products (213)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX502017 Infiniti QX602017 Infiniti QX702017 Infiniti QX802016 Infiniti Q402016 Infiniti Q502016 Infiniti Q602016 Infiniti Q702016 Infiniti QX502016 Infiniti QX60+ 193 moreAssociated Documents - January 4, 2018•Document ID: 10129108Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- ITB12-011j
- Date Added:
- February 21, 2018
- Manufacturer:
- INFINITI
SummaryTELEMATICS SERVICE INFORMATION This bulletin has been amended. A correction was made to the Service Procedure on page 15. No other changes were made. Please discard previous versions of this bulletin.
Associated Products (28)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX602017 Infiniti QX802016 Infiniti Q502016 Infiniti Q702016 Infiniti QX602016 Infiniti QX802015 Infiniti Q502015 Infiniti Q702015 Infiniti QX602015 Infiniti QX80+ 8 moreAssociated Documents - December 18, 2017•Document ID: 10127444Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- ITB17-060
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryINFINITI; INTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE SERVICE INFORMATION When the initialization procedure being performed with a new or existing Intelligent Key to an applied vehicle is interrupted (the procedure stops or will not continue), the BCM may be left in learn mode and will not function until it returns to normal mode. Under this condition, the BCM and Intelligent Key(s) will not function normally. If this condition occurs, the BCM must be returned to normal mode and the initialization procedure started over. To get back to the beginning of the Initialization procedure, use one of the following procedures: - Successfully perform the initialization procedure using one of the original Intelligent Keys twice consecutively. - Each successful initialization will follow with two (2) quick tones. OR - When the initialization procedure cannot be successfully performed twice (more than two quick tones), perform the initialization procedure five (5) times using the inoperative ?failed? Intelligent Key. - Initialization does not need to be successful when performed five times. When returning to normal operating mode, the initialization procedure for all Intelligent Keys may be started again.
Associated Products (3)Associated Documents - December 5, 2017•Document ID: 10127441Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- ITB13-026g
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryDISPLAY CONTROL UNIT REPLACEMENT This bulletin has been amended. The Applied Vehicles section and Part 1 of the Service Procedure have been revised. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (13)Associated Documents - November 29, 2017•Document ID: 10127465Service Bulletin/Repair InstructionsVISIBILITY:GLASS, SIDE/REAR
- Mfr Comm. #:
- ITB17-009a
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryWINDOW GLASS WARRANTY INFORMATION This bulletin has been amended to apply to the latest models and model years, and warranty information on page 2 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (212)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX502017 Infiniti QX602017 Infiniti QX702017 Infiniti QX802016 Infiniti Q402016 Infiniti Q502016 Infiniti Q602016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX70+ 192 moreAssociated Documents - November 29, 2017•Document ID: 10127462Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- ITB09-039e
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryWINDSHIELD CRACKING This bulletin has been amended to apply to the latest models and model years. Also, warranty information on pages 1 and 8 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (212)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX502017 Infiniti QX602017 Infiniti QX702017 Infiniti QX802016 Infiniti Q402016 Infiniti Q502016 Infiniti Q602016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX70+ 192 moreAssociated Documents - November 28, 2017•Document ID: 10127461Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- ITB00-024g
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryBRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR This bulletin has been amended to include vehicles built up to the publication date. Also, tips for using the ProCut? brake lathe were added on page 8, and a Brake Noise Diagnostic Worksheet was added on page 10. Please discard previous versions of this bulletin.
Associated Products (212)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX502017 Infiniti QX602017 Infiniti QX702017 Infiniti QX802016 Infiniti Q402016 Infiniti Q502016 Infiniti Q602016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX70+ 192 moreAssociated Documents - November 27, 2017•Document ID: 10127469Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB17-055
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryINFINITI; INTELLIGENT KEY IDENTIFICATION AND REGISTRATION TIPS This bulletin applies to vehicles equipped with Intelligent Key only. SERVICE INFORMATION When replacing or adding an Intelligent Key, it is very important to make sure the correct Intelligent Key is selected from the parts department. - A running change was made that will help identify the correct Intelligent Key. - Beginning in late 2017 and early 2018 the last five digits of the Intelligent Key part number is marked on the Intelligent Key under the mechanical key. - See page 2 for location images of this part number addition. NOTE: - A correct Intelligent Key may or may not have the last five digits of the part number as shown on page 2. - The above running change was applied as a ?help? to identify the correct Intelligent Key for a given vehicle, but the actual part number listed in the parts catalog did not change. - Make sure to use the electronic parts catalog (FAST) or equivalent to confirm the correct Intelligent Key for a given vehicle.
Associated Products (7)Associated Documents - November 14, 2017•Document ID: 10127463Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- ITB12-011i
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies to vehicles that are equipped with factory Navigation system. This bulletin has been amended. Changes have been made throughout. You must read the entire bulletin to understand all the changed information. Please discard all previous versions of this bulletin.
Associated Products (28)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX602017 Infiniti QX802016 Infiniti Q502016 Infiniti Q702016 Infiniti QX602016 Infiniti QX802015 Infiniti Q502015 Infiniti Q702015 Infiniti QX602015 Infiniti QX80+ 8 moreAssociated Documents - November 6, 2017•Document ID: 10127466Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- ITB17-037b
- Date Added:
- January 29, 2018
- Manufacturer:
- INFINITI
SummaryINFINITI; DISPLAY CONTROL UNIT INFORMATION This bulletin has been amended. The TITLE and APPLIED VEHICLES section have been updated. No other changes have been made. Discard all previous versions of this bulletin.
Associated Products (6)Associated Documents - September 28, 2017•Document ID: 10118684Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- ITB17-037a
- Date Added:
- October 12, 2017
- Manufacturer:
- INFINITI
Summary2017 QX60, QX60 HYBRID AND QX30; DISPLAY CONTROL UNIT INFORMATION This bulletin has been amended. Figure 2 was changed to identify the AV control unit and the Navi control unit. Please discard previous versions of this bulletin.
Associated Products (2)Associated Documents - September 28, 2017•Document ID: 10118683Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- ITB12-011h
- Date Added:
- October 12, 2017
- Manufacturer:
- INFINITI
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies to vehicles equipped with factory Navigation system. This bulletin has been amended. Information for several 2018 models has been added. No other changes have been made. Please discard all previous versions of this bulletin.
Associated Products (27)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX602017 Infiniti QX802016 Infiniti Q502016 Infiniti Q702016 Infiniti QX602016 Infiniti QX802015 Infiniti Q502015 Infiniti Q702015 Infiniti QX602015 Infiniti QX802014 Infiniti Q50+ 7 moreAssociated Documents - September 25, 2017•Document ID: 10118686Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- ITB17-049
- Date Added:
- October 12, 2017
- Manufacturer:
- INFINITI
Summary2017-2018 QX60 AND QX60 HYBRID; 2ND ROW SEAT HANDLE "CARGO MODE" CHANGE SERVICE INFORMATION A change has been made to the 2nd row seat handles in the Applied Vehicles. Vehicles produced between August 25, 2017 and September 8, 2017 (see VIN information below) are equipped with 2nd row seat handles that have "CARGO MODE" displayed on them (Figure 1). Applied Vehicles built before and after the time period shown above are equipped with blank seat handles (Figure 2). Vehicles built BETWEEN: Wheat interior: 5N1DL0M(**)HC 560656 to 5N1DL0M(**)JC 500895 Graphite or Java interior: 5N1DL0M(**)HC 560638 to 5N1DL0M(**)JC 500932 ARE equipped with 2nd row seat handles with "CARGO MODE" displayed on them. The Infiniti New Vehicle Limited Warranty does not cover replacement of a "CARGO MODE" handle (correctly built vehicle) with a blank handle. Refer to the Infiniti Assurance Products Resource Manual (APRM) for guidelines on warranty coverage. The vehicle owner's manual contains the complete details regarding the limited warranty.
Associated Products (2)Associated Documents - September 25, 2017•Document ID: 10118678Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; WHEELS
- Mfr Comm. #:
- ITB11-005c
- Date Added:
- October 12, 2017
- Manufacturer:
- INFINITI
SummaryWHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (72)2018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX502017 Infiniti QX602017 Infiniti QX702017 Infiniti QX802016 Infiniti Q402016 Infiniti Q502016 Infiniti Q602016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX70+ 52 moreAssociated Documents - September 6, 2017•Document ID: 10118685Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN; ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
- Mfr Comm. #:
- ITB17-048
- Date Added:
- October 12, 2017
- Manufacturer:
- INFINITI
Summary2013 JX35 AND 2014 - 2017 QX60; RADIATOR SHROUD AND COOLING FAN ASSEMBLY REPLACEMENT PROCEDURE SERVICE INFORMATION When replacing the radiator shroud and cooling fan assembly for any reason, the engine coolant, air cleaner case, and air duct does not need to be removed as part of the procedure. Use this SERVICE PROCEDURE (in place of the ESM) and the CLAIMS INFORMATION in this bulletin. The ESM will be updated at a later date. IMPORTANT: You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Associated Products (4)Associated Documents - August 25, 2017•Document ID: 10117389Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION
- Mfr Comm. #:
- ITB17-016c
- Date Added:
- September 14, 2017
- Manufacturer:
- INFINITI
Summary2013 JX35 AND 2014 - 2016 QX60 OCCUPANT CLASSIFICATION SYSTEM RETROFIT This bulletin has been amended. Pages 15 and 17 have been revised. No other changes have been made. Please discard all previous versions of this bulletin.
Associated Products (4)Associated Documents - August 21, 2017•Document ID: 10117392Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE)
- Mfr Comm. #:
- ITB17-042a
- Date Added:
- September 14, 2017
- Manufacturer:
- INFINITI
SummaryINFINITI; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. The APPLIED VEHICLES and CLAIMS INFORMATION sections have been revised. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (55)2018 Infiniti Q502018 Infiniti Q702018 Infiniti QX302017 Infiniti Q502017 Infiniti Q702017 Infiniti QX302017 Infiniti QX502017 Infiniti QX602017 Infiniti QX802016 Infiniti Q502016 Infiniti Q702016 Infiniti QX502016 Infiniti QX602016 Infiniti QX802015 Infiniti Q402015 Infiniti Q502015 Infiniti Q602015 Infiniti Q702015 Infiniti QX502015 Infiniti QX60+ 35 moreAssociated Documents