NISSAN IS RECALLING CERTAIN FRONT AND REAR LOWER LINKS, P/NOS. 54501ZQ00A, 54500ZQ00A, 551A1ZQ00A, 551A0ZQ00A , 54501EA00A, 54500EA00A, 551A1EA500, 551A0EA500, 54501ZR00A, AND 54500ZR00A, SOLD BETWEEN NOVEMBER 25, 2009 AND MAY 14, 2010 AS REPLACEMENT PARTS FOR MODEL YEAR 2004 THROUGH 2010 TITAN, ARMADA, AND QX56, AND MODEL YEARS 2005 THROUGH 2010 FRONTIER, XTERRA, AND PATHFINDER VEHICLES. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2010 TITAN, ARMADA, QX56, FRONTIER, XTERRA, AND PATHFINDER VEHICLES MANUFACTURED FROM NOVEMBER 19, 2009 THROUGH MARCH 3, 2010. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.
I recently purchased this vehicle, and within weeks it began experiencing intermittent and complete failure to start. The most serious incident happened in Phoenix at a Walmart parking lot. The vehicle refused to start at around 10 PM, and I was stranded with my daughter until 1 AM in the middle of a severe storm. The vehicle would not crank, would not click, and gave no warning lights before the failure. We were stuck inside the vehicle with no ability to move it to safety. This created a dangerous situation because we were exposed to lightning, heavy rain, and unsafe conditions in a dark parking lot late at night. If the vehicle had failed in traffic or on the highway, it could have caused an accident or left us trapped in a hazardous location. The failure is unpredictable and has happened multiple times, making the vehicle unreliable and unsafe to operate. The symptoms match known electrical defects documented in Infiniti/Nissan Technical Service Bulletins, including IPDM failure, BCM communication faults, ECM relay malfunction, starter relay issues, and CAN communication errors. These failures can disable the vehicle without warning and prevent it from starting for extended periods. I am requesting an investigation into electrical system defects for this model year and VIN because this issue poses a serious safety risk to me, my child, and other drivers.
No injuries · No fire · No crash
Hello, I am the owner of the vehicle is a 2010 Infiniti QX56. Please look into any recalls provide placement or vehicle as well. I no longer have it as a vehicle was stolen. I need I need either a reimbursement or the vehicle, but it does have recalls, and the reason why the vehicle was stolen or taken from the truckstop was because of the tire the wheels something had to do with that the reason why I have no dangerous recall on vehicle. Email me at [XXX] Thank you INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
The passenger airbag restraint system has failed. Specifically, the passenger seat airbag sensor has failed, meaning there is no current airbag functionality for the passenger in my 2010 Infiniti QX56. There was a voluntary safety recall for (R1606) for Infiniti QX56's with years 2014-2016 for the same fault. Obviously, this is a tremendous life and safety risk and should be resolved by the manufacturer.
No injuries · No fire · No crash
My airbag light came on and is flashing, I also have no horn
No injuries · No fire · No crash
EVERYTHING RECALLED IS WRONG WITH MY CAR
No injuries · No fire · No crash