2021-2025 Jeep Wrangler / Gladiator Misfire DTCs and Rough Idle
This technical service bulletin (TSB) 9100498 details solutions for misfire DTC codes, rough idle, and valvetrain noise in various 2021-2025 Jeep, Dodge, and RAM vehicles. The issue often stems from worn intake camshaft lobes and rocker arm sliders, particularly in high-mileage vehicles. A special…

S'applique également à
- Jeep Gladiator
- 2021–2025
- Jeep Grand Cherokee
- 2021–2024
- Jeep Grand Cherokee L
- 2021–2024
- Jeep Wrangler
- 2022–2025
- Dodge Durango
- 2021–2025
- Ram 1500
- 2021–2025
Owners of 2021-2025 Jeep Wrangler, Gladiator, Dodge Durango, and RAM 1500 vehicles equipped with the 3.6L PSU Long Block engine may encounter issues such as misfire DTC codes, rough idle, or valvetrain noise. This manufacturer communication, TSB 9100498, identifies the root cause and outlines a specific repair procedure to resolve these problems.
Symptoms
Vehicle owners might notice one or more of the following symptoms, particularly in vehicles with 10,000 to 60,000 miles:
- Misfire DTC codes indicating engine misfires.
- Rough idle where the engine runs unevenly when stationary.
- Valvetrain noise, which can manifest as ticking or tapping sounds from the engine.
These conditions are frequently linked to wear on the intake camshaft's high lift lobe(s) and the corresponding intake rocker arm(s) high lift slider.
Diagnosis
To accurately diagnose the issue described in TSB 9100498, technicians will follow a specific process:
- Valve Cover Removal: The first step involves removing the valve cover(s) according to standard service procedures to gain access to the valvetrain components.
- Locating the Condition: A stethoscope or specific cylinder misfire diagnostic trouble codes (DTCs) can help pinpoint whether the issue is on the left or right bank of the engine.
- Visual Confirmation: Once the valve covers are off, technicians will visually inspect the high lift intake lobe(s) and rocker arm(s) slider for signs of wear. This visual confirmation is crucial before proceeding with the repair.
Repair Procedure Summary
Instead of replacing the entire engine or long block, TSB 9100498 specifies using a special service kit designed for this particular type of repair. This kit includes all necessary components such as the intake cam, rocker arms, sealer, and gaskets.
After confirming the repair will be performed using the camshaft/rocker arms kit, it is also vital to ensure the vehicle has the latest calibration/software update for the oil pump's high-pressure operation mode during engine startup. This update helps optimize engine performance and longevity.
- Software Updates: For RAM 1500 (RU), Jeep Grand Cherokee / Grand Cherokee L (VF, WL), and Dodge Durango (WD) vehicles, the latest oil pump mode software is already included in all 2025 model year (25MY) and newer vehicles. For 2024 model year (24MY) vehicles, service releases are available.
- Jeep Wrangler and Gladiator Updates: Jeep Wrangler (JL) and Jeep Gladiator (JT) models received this update as a running change in 2024MY and beyond, specifically on August 15, 2024, and August 19, 2024, respectively. 24MY service releases are also available for these models.
- Dodge Durango Updates: Dodge Durango (DT) models were updated starting with the 2025MY and beyond.
If a 2024MY vehicle requires repair and has a service release available, technicians must follow the released service procedures to apply the corresponding calibration/software update.
Required Tools or Parts
The primary component for this repair is a specialized service kit. This kit contains:
- Intake cam
- Rocker arms
- Sealer
- Gaskets
The specific part numbers for these kits are 68293286A$, 68361456A$, 68423711A$, 68565531A$, and 68565534A$.
Important Warnings
This bulletin explicitly states that a special service kit should be used for this repair instead of replacing the complete engine/long block. This guidance is crucial for proper and cost-effective resolution of the issue. Owners should be aware of this to ensure the correct repair procedure is followed.
Owner Action
If your 2021-2025 Jeep Wrangler, Gladiator, Dodge Durango, or RAM 1500 is exhibiting misfire DTC codes, rough idle, or valvetrain noise, it is recommended to schedule an appointment with an authorized dealership. Inform them of the symptoms you are experiencing. The dealership will be able to diagnose the issue using TSB 9100498 and perform the necessary repairs, including the installation of the service kit and any required software updates.
NHTSA ID: 11015065
Frequently Asked Questions
- What vehicles are affected by TSB 9100498?
- TSB 9100498 applies to various 2021-2025 models, including the Jeep Wrangler, Jeep Gladiator, Dodge Durango, and RAM 1500, specifically those equipped with the 3.6L PSU Long Block engine.
- What are the common symptoms of this issue?
- Owners may experience misfire DTC codes, a rough idle, or valvetrain noise. These symptoms typically appear in vehicles with mileage between 10,000 and 60,000 miles.
- What causes the misfire DTC codes and rough idle?
- The primary cause is identified as wear on the intake camshaft's high lift lobe(s) and the intake rocker arm(s) high lift slider within the engine's valvetrain.
- How is the issue resolved according to TSB 9100498?
- The repair involves using a special service kit that contains new intake cam, rocker arms, sealer, and gaskets. Additionally, a software update for the oil pump operation mode (high pressure mode) during engine startup is required for affected vehicles.
- Should the entire engine be replaced for this problem?
- No, TSB 9100498 explicitly states that a special service kit should be used for the repair instead of replacing the complete engine or long block, which is an important consideration for owners.
Related Articles
2021 Jeep Wrangler Health Check: Recalls and Bulletins
The 2021 Jeep Wrangler has faced several significant issues, including recalls for potential engine stalls, high voltage battery fires in 4Xe models, and instrument panel failures. Owners should be aware of these safety concerns and numerous service bulletins addressing various electrical, engine…
2021-2026 Stellantis KeyFOB Low Battery DTCs B1A10-00
Stellantis TSB S2608000010 addresses diagnostic trouble codes B1A10-00 through B1A17-00 related to KeyFOB low battery conditions in 2021-2026 Chrysler, Dodge, Jeep, and RAM vehicles. Symptoms include inoperable remote keyless entry or passive start. Learn the recommended fix.
2021-2026 Jeep Wrangler/Gladiator Handle Release Parts
A Quality Inspection Request has been issued for specific 'HANDLE - INSIDE RELEASE' parts (68282334AD, 68282335AD, 68282336AD, 68282337AD, 68323950AD, 68323951AD) affecting 2021-2026 Jeep Wrangler and Gladiator vehicles. Parts built before August 7, 2025, are suspect and require return.
2021-2026 Jeep Wrangler/Gladiator Filiform Corrosion TSB
FCA Caribbean Warranty Bulletin ID-25-11 Rev. B provides updated procedures for diagnosing and repairing aluminum filiform corrosion on various body panels for 2021-2026 Jeep Wrangler and Gladiator vehicles, including specific labor operations and Vehicle Digital Imaging (VDI) pre-approval…
2021-2026 Jeep Wrangler/Gladiator Filiform Corrosion Warranty
Jeep Warranty Bulletin D-25-15 (Rev. B) addresses aluminum filiform corrosion on 2021-2026 Jeep Wrangler and Gladiator vehicles. This bulletin updates the repair process for inner door shells and clarifies the Vehicle Digital Imaging (VDI) pre-approval requirements for paint repairs and panel…
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.