Mazda Mazda6 Service Bulletins
1,417 manufacturer communications on file.
- October 3, 2017•Document ID: 10123436Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- 09-012-17-3334b
- Date Added:
- November 14, 2017
- Manufacturer:
- MAZDA
SummarySome vehicles may experience unusual noise coming from inside the front door panel when playing the audio system. This is caused by the damper coming off the speaker frame due to corrosion. To correct the issue, a plating process was added at the supplier beginning on November 13, 2015.
Associated Products (10)Associated Documents - September 13, 2017•Document ID: 10118754Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SA-036-17
- Date Added:
- October 12, 2017
- Manufacturer:
- MAZDA
SummaryIDS SOFTWARE VERSION 107 AVAILABLE ON MGSS - PLEASE UPDATE YOUR PC'S. Upgrade your PCs to IDS version 107.00 and 107.01 from the previous version.
Associated Products (21)2017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda Mazda32015 Mazda Mazda62014 Mazda CX-52014 Mazda Mazda32014 Mazda Mazda62013 Mazda CX-52013 Mazda Mazda3+ 1 moreAssociated Documents - September 12, 2017•Document ID: 10118753Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- SA-068-17
- Date Added:
- October 12, 2017
- Manufacturer:
- MAZDA
SummarySTOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do not remove it), and then pull out the connector.
Associated Products (33)2011 Mazda CX-72011 Mazda CX-92011 Mazda Mazda62011 Mazda RX-82010 Mazda CX-72010 Mazda CX-92010 Mazda Mazda62010 Mazda RX-82009 Mazda B-Series2009 Mazda CX-72009 Mazda CX-92009 Mazda Mazda62009 Mazda RX-82008 Mazda B-Series2008 Mazda CX-72008 Mazda CX-92008 Mazda Mazda62008 Mazda RX-82007 Mazda B-Series2007 Mazda CX-7+ 13 moreAssociated Documents - September 12, 2017•Document ID: 10118752Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR; ELECTRICAL SYSTEM:WIRING
- Mfr Comm. #:
- SA-067-17
- Date Added:
- October 12, 2017
- Manufacturer:
- MAZDA
SummaryDue to a change in the 2017 Mazda3, Mazda6 and 2018 CX-9 A-pillar wiring harness, the EC Mirror w/compass / EC Mirror w/compass + Homelink installation instructions have been updated.
Associated Products (3)Associated Documents - September 8, 2017•Document ID: 10120386Service Bulletin/Repair InstructionsLANE DEPARTURE: WARNING; EXTERIOR LIGHTING:HAZARD FLASHING WARNING LIGHTS
- Mfr Comm. #:
- 15-003-17-3284b
- Date Added:
- October 21, 2017
- Manufacturer:
- MAZDA
SummarySome customers may notice that the Lane Departure Warning System (LDWS) and High Beam Control (HBC) (amber) warning lights are on when they start driving around dusk or dawn under low temperatures. At that time, the windshield is clear but the lens of the Forward Sensing Camera (FSC) is foggy. The FSC may not function properly under the following conditions: ? Foggy windshield ? Foggy FSC lens ? Heavy rain, dense fog, snow and direct sun light ? No or poor lane markings. When the FSC control system detects the foggy lens of the camera, the system deactivates LDWS and HBC functions.
Associated Products (5)Associated Documents - September 8, 2017•Document ID: 10120384Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- 07-007-17-3384
- Date Added:
- October 21, 2017
- Manufacturer:
- MAZDA
SummarySome customers may complain about poor heater performance even after the engine reaches normal operating temperature. This may be caused by a clogged heater unit. For Mazda6 and CX-5, the check engine light may illuminate with the DTC P011A:00 stored at the same time. P011A:00 ECT sensor No.1/No.2 performance problem. NOTE: Refer to TSB 01-015/15 if the customer is using a block heater at temperatures below freezing.
Associated Products (15)Associated Documents - September 1, 2017•Document ID: 10118751Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM
- Mfr Comm. #:
- SA-066-17
- Date Added:
- October 12, 2017
- Manufacturer:
- MAZDA
SummarySome vehicles may have DTC C1001:92 stored in memory. DTC C1001:92 sets as a past record for low visibility of the Forward Sensing Camera (FSC). It does not mean there is an actual FSC defect. In some cases the customer may have a concern with the Lane Departure Warning System (LDWS) and/or High Beam Control system (HBC). In other cases this DTC might be found without a related customer concern. NOTE: Instrument Cluster Multi-Information Display Warning Messages vary depending on vehicle year/model. See the Owner's Manual for details.
Associated Products (16)Associated Documents - August 29, 2017•Document ID: 10118477Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING; SUSPENSION
- Mfr Comm. #:
- 02-003-17-3300c
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a knocking / squeaking noise from the front shock absorber when driving on rough roads and/or when turning the steering wheel while the vehicle is stopped. The noise may be due to: Upper front strut bearing (A) damage. (CX-5 and Mazda6). Squeak type noise between the front strut bearing and coil spring. (CX-3, CX-5 and Mazda6). The bump stopper (C) may be contacting the strut bearing when the front shock absorber is compressed, causing a popping noise. (Mazda6 only). The front lower arm bushing (D) is making a creak type noise in wet road conditions. (CX-5 and Mazda6).
Associated Products (9)Associated Documents - August 24, 2017•Document ID: 10118474Service Bulletin/Repair InstructionsLANE DEPARTURE: WARNING; EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH; EXTERIOR LIGHTING; LANE DEPARTURE
- Mfr Comm. #:
- 15-003-17-3284a
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummarySome customers may notice that the Lane Departure Warning System (LDWS) and High Beam Control (HBC) (amber) warning lights are on when they start driving around dusk or dawn under low temperatures. At that time, the windshield is clear but the lens of the Forward Sensing Camera (FSC) is foggy. The FSC may not function properly under the following conditions: ? Foggy windshield ? Foggy FSC lens ? Heavy rain, dense fog, snow and direct sun light ? No or poor lane markings. When the FSC control system detects the foggy lens of the camera, the system deactivates LDWS and HBC functions.
Associated Products (5)Associated Documents - August 24, 2017•Document ID: 10118473Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- 01-012-17-3382
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummaryThis service information provides basic Q-85/T-110 battery handling procedures. Complete service information can be found in MGSS online or Workshop Manual (section 13-17).
Associated Products (8)Associated Documents - August 23, 2017•Document ID: 10118472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-017-17-3347c
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 59.00.502 or later). NOTE: For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of Mazda?s continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software. If the customer agrees, turn off the tachometer display on the AD-Display tab in MAZDA CONNECT Settings before performing the update.
Associated Products (16)Associated Documents - August 22, 2017•Document ID: 10118471Service Bulletin/Repair InstructionsSTEERING; SUSPENSION
- Mfr Comm. #:
- 06-002-17-3367
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit an unusual noise (clacking) from under the front of the vehicle. This noise only occurs when starting to move the vehicle while the steering wheel is turned to the full left position. NOTE: The noise will not occur if the steering wheel is in the center or full right position. The noise is caused when the edge (A) of the left side inner ball joint (B) gets stuck with the steering gear housing (C).
Associated Products (13)Associated Documents - August 18, 2017•Document ID: 10118480Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-064-17
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummarySome customers may complain about one or more warning lights on when they start the vehicle during hot weather. The combination of warning lights mentioned by the customer may include: SCBS, LDWS, HBC. Instrument Cluster Multi-Information Display warning messages may include: Forward Smart City Brake Support Malfunction, Smart Brake System Malfunction, Front Camera Sensor System Malfunction. MAZDA CONNECT center display warning messages may include: High Beam Control [HBC] / Lane-keep Assist System [LAS] Malfunction. Have the vehicle checked by a dealer if this indicator stays On. Smart City Brake Support [SCBS] Malfunction. Have the vehicle checked by a dealer immediately.
Associated Products (5)Associated Documents - August 10, 2017•Document ID: 10118479Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SA-065-17
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummaryUse the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns. MAZDA CONNECT Symptom Troubleshooting Table Sections: Audio System, Bluetooth®, Center Display, DTC, i-ACTIVESENSE, Maintenance Monitor, Navigation, Noise, Reboot / Frozen Screen / Slow Response, USB / Aux, Voice Command
Associated Products (22)2018 Mazda CX-32018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda Mazda32015 Mazda Mazda6+ 2 moreAssociated Documents - August 9, 2017•Document ID: 10118468Service Bulletin/Repair InstructionsSTRUCTURE; ELECTRICAL SYSTEM; EXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- 09-001-17-3296b
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummaryWhen dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No. 2 (C) socket covers have not been correctly installed or are missing due to improper prior repairs (i.e., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, HID module seal (D), or missing bumper brackets (E) is not covered by warranty policy.
Associated Products (83)2018 Mazda CX-32018 Mazda Mazda32017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-92015 Mazda Mazda32015 Mazda Mazda52015 Mazda Mazda62015 Mazda MX-5+ 63 moreAssociated Documents - August 7, 2017•Document ID: 10118467Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 09-035-17-3080
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummaryIn accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
Associated Products (161)2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 141 moreAssociated Documents - August 4, 2017•Document ID: 10118466Service Bulletin/Repair InstructionsLANE DEPARTURE: BLIND SPOT DETECTION; VISIBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 15-005-17-3358
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummarySome customers may complain that when passing a vehicle slowly, even if the vehicle is still in the alert area, the BSM indicator light on the outer mirror glass does not illuminate. Customers who have owned previous Mazda vehicles are more likely to complain. The BSM control module has been modified to address this customer concern.
Associated Products (8)Associated Documents - August 4, 2017•Document ID: 10118463Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; STRUCTURE
- Mfr Comm. #:
- 09-012-17-3334a
- Date Added:
- October 4, 2017
- Manufacturer:
- MAZDA
SummarySome vehicles may experience unusual noise coming from inside the front door panel when playing the audio system. This is caused by the damper coming off the speaker frame due to corrosion on the speaker back frame. To correct the issue, a plating process was added at the supplier beginning on November 13, 2015.
Associated Products (10)Associated Documents - July 26, 2017•Document ID: 10120381Service Bulletin/Repair InstructionsAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
- Mfr Comm. #:
- 08-003-17-3345
- Date Added:
- October 21, 2017
- Manufacturer:
- MAZDA
SummaryMazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including Mazdaspeed6) and 2004-2011 RX-8: Collect 30 Driver-side and 30 Pas-senger-side inflators (60 total) from vehicles that have completed Recall 8215F for Driver-side and Recall 9416E for Passenger-side airbags in the following zones. For 2010-2013 Mazda3: Collect 200 Passenger-side inflators from vehicles in the following zones.
Associated Products (18)Associated Documents - July 26, 2017•Document ID: 10111043Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- MT-015-17
- Date Added:
- August 10, 2017
- Manufacturer:
- MAZDA
SummarySome customers may complain about the following MAZDA CONNECT Temperature Warning message: Display is too Hot. Screen performance may be decreased until it cools. The warning message displays when the MAZDA CONNECT screen temperature is above 176 degrees Fahrenheit (80 degrees Celsius).
Associated Products (22)2018 Mazda CX-32018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda Mazda32015 Mazda Mazda6+ 2 moreAssociated Documents