Mazda Mazda6 Service Bulletins
1,417 manufacturer communications on file.
- July 16, 2019•Document ID: 10163367Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- 07-002-19-3616
- Date Added:
- August 1, 2019
- Manufacturer:
- MAZDA
SummaryA musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. "Mazda Air Cooling Coil Coating" is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.
Associated Products (107)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 87 moreAssociated Documents - July 12, 2019•Document ID: 10163404Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD; STRUCTURE
- Mfr Comm. #:
- 09-026-19-3613
- Date Added:
- August 2, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit the cushion tape (1) attached to the front end of dashboard coming off and showing at the base of the windshield. This is caused by the cushion tape peeling off from the end(s) due to interference with the windshield and vehicle vibration (CX-5/Mazda6) or from the gap between the dashboard and the cushion tape because there there is no rib (1) at the dashboard ends (Mazda3). To prevent the tape from peeling off, both ends of the cushion tape are now folded over to the back side of the dashboard (CX-5/Mazda6) or stapled (Mazda3).
Associated Products (13)Associated Documents - July 9, 2019•Document ID: 10163333Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-029-19
- Date Added:
- August 1, 2019
- Manufacturer:
- MAZDA
SummaryDue to a database error discovered with IDS 114.00-114.02 release (which affects Recall 3719F), it will be necessary to uninstall IDS 114 and install IDS 113.00 and 113.06 update. The Recall can be performed after removing IDS 114 and installing IDS 113. This SA will be updated when more information is available.
Associated Products (90)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 70 moreAssociated Documents - June 25, 2019•Document ID: 10162027Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-027-19
- Date Added:
- July 2, 2019
- Manufacturer:
- MAZDA
SummaryACCESSORY INSTRUCTIONS LOCATION: Accessory instructions can be found in the Accessory eCatalog. https://ecatalog.trademotion.com/
Associated Products (24)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 4 moreAssociated Documents - June 6, 2019•Document ID: 10162014Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- 09-022-19-3599
- Date Added:
- July 1, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 70.00.335C or later). NOTE:For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of MazdaâÂÂs continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software. If the customer agrees, turn off the tachometer display on the AD-Display tab in MAZDA CONNECT Settings before performing the update. NOTE: If the customer has customized MAZDA CONNECT with something like a different background using unauthorized software, make sure they know the following information before updating MAZDA CONNECT to avoid any issues later on. Updating MAZDA CONNECT to the latest version will erase any customization created by unauthorized software.Unauthorized customization software will not work on the latest version of MAZDA CONNECT software. The latest version of MAZDA CONNECT software cannot be rolled back to an earlier version. Mazda does not recommend unauthorized customization of MAZDA CONNECT due to the possibility of unexpected problems. Any issues related to this will not be covered under Mazda warranty policy.
Associated Products (25)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 5 moreAssociated Documents - June 6, 2019•Document ID: 10162013Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 05-005-19-3569
- Date Added:
- July 1, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit one of the following concerns: Sometimes the shifter may jump out of 3rd gear over a road bump when accelerating after deceleration at 25-40 mph (40-65 km/h), Hard to shift into 3rd, 4th, 5th, and/or 6th gear, Shift lever vibrates when driving in 3rd or 4th gear. This is caused by inappropriate transmission internal parts.
Associated Products (12)Associated Documents - May 29, 2019•Document ID: 10160582Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SA-022-19
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummaryIf you receive a customer complain of lack of power, rough idle, engine noise with stored DTC's P0340:00, P0304:00, P3400:00, P349B:00, and/or P3498:00, perform the following.
Associated Products (4)Associated Documents - May 23, 2019•Document ID: 10160583Service Bulletin/Repair InstructionsSTEERING: STEERING WHEEL/HANDLE BAR; STEERING
- Mfr Comm. #:
- 06-002-19-3585a
- Date Added:
- May 31, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit wear/peel-off of the leather steering wheel surface causing a poor appearance. This concern may be caused by an insufficient wear resistance of the steering wheel surface.
Associated Products (14)Associated Documents - May 20, 2019•Document ID: 10160578Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SA-015-19a
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummaryIf you receive a customer concern with the check engine light coming on and DTC P3400 (cylinder deactivation system malfunction) stored, perform the inspection in the Repair Procedure.
Associated Products (4)Associated Documents - May 20, 2019•Document ID: 10160555Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 05-004-19-3466
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory (P0842, P0847, P0872, P0877, P0780, P1738). P0842:00 - Oil pressure switch No. 1 (oil pressure switch B) stuck on P0847:00 - Oil pressure switch No. 2 (oil pressure switch A) stuck on P0872:00 - Oil pressure switch No. 3 (oil pressure switch A) stuck on P0877:00 - Oil pressure switch No. 4 (oil pressure switch B) stuck on P0780:00 - Gear shifting malfunction P1738:00 - Automatic transaxle internal malfunction This is caused by the oil pressure switch A and/or B at the control valve body temporarily or permanently getting stuck due to contamination entering the passage. To correct the problem, some mass production changes have been implemented to reduce contamination and improve the DTC diagnostic logic. NOTE: If the vehicle also has a delayed engagement concern, this TSB is not applicable. Refer to the instructions on MGSS (SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION [FW6A-EL/FW6AX-EL]) or (SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION [EW6A-EL/EW6AX-EL]) for proper diagnosis and repair procedure.
Associated Products (28)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda62018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62015 Mazda CX-5+ 8 moreAssociated Documents - May 6, 2019•Document ID: 10160579Service Bulletin/Repair InstructionsBACK OVER PREVENTION; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-018-19
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummaryDue to a changes in the 2018 Mazda6, there are two things to note of when installing the Rear Parking Sensors. 1. When securing the main harness in step 4, DO NOT attach the one tie wrap as shown. There is the possibility of attaching it to the moonroof drain hose and pinching the hose. 2. When routing the sensor harness behind the rear bumper (section 8, Installation of Harness section 2-2) utilizing the 3 mount base positions, the middle mounting base position #2 is located under the Blind Spot Monitoring sensor bracket as shown.
Associated Products (2)Associated Documents - May 6, 2019•Document ID: 10160553Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 05-003-19-3593
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummaryWhen pressing the START/STOP button, the ignition may not turn off on some vehicles equipped with a gate-type AT shifter. Although the shift lever is in âÃÂÃÂPâÃÂàposition and the engine shuts off normally, the ignition may stay on (in accessory mode). Some customers may describe this concern as "the radio stays on" or "the radio is staying on". This concern may be caused by a worn switch unit. To eliminate this concern, the switch unit material has been changed to improve wear resistance. Modified switch units have been established as new service parts.
Associated Products (3)Associated Documents - May 1, 2019•Document ID: 10160575Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; BACK OVER PREVENTION
- Mfr Comm. #:
- SA-006-19a
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain about a MAZDA CONNECT system reboot or blank screen. Use the flowchart below to repair the vehicle.
Associated Products (24)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda3+ 4 moreAssociated Documents - April 23, 2019•Document ID: 10159194Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM
- Mfr Comm. #:
- 01-008-19-3568a
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummarySome customer using âÃÂÃÂFlexibleâÃÂàsetting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.
Associated Products (11)Associated Documents - April 15, 2019•Document ID: 10159195Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 01-011-19-3586
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummarySome customers may experience a check engine light illuminating with DTC P2096:00 stored in PCM memory. DTC P2096:00 - Air fuel too lean. NOTE: This concern occurs only on vehicles with PCMs manufactured by Mitsubishi. Due to improper control logic of the PCM, a false error may be detected. To eliminate this concern, the PCM software has been modified.
Associated Products (4)Associated Documents - April 8, 2019•Document ID: 10159204Service Bulletin/Repair InstructionsSUSPENSION:FRONT:WHEEL BEARING; WHEELS
- Mfr Comm. #:
- SA-016-19
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryThere have been warranty claims submitted for noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
Associated Products (35)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-5+ 15 moreAssociated Documents - April 8, 2019•Document ID: 10159203Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SA-015-19
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryIf you receive a customer concern with the check engine light coming on and DTC P3400 (cylinder deactivation system malfunction) stored, perform the inspection in the Repair Procedure.
Associated Products (4)Associated Documents - April 5, 2019•Document ID: 10159198Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-001-19b
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryAPPLE CARPLAY⢠/ ANDROID AUTO⢠FREQUENTLY ASKED QUESTIONS (FAQ)
Associated Products (25)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 5 moreAssociated Documents - April 4, 2019•Document ID: 10159199Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-002-19a
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryOn May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing the accessory locking lug nuts, make sure to use the appropriate part number for the vehicle you are working on.
Associated Products (10)Associated Documents - April 4, 2019•Document ID: 10159196Service Bulletin/Repair InstructionsWHEELS; WHEELS:LUGS/NUTS/BOLTS/STUDS
- Mfr Comm. #:
- RF-18-02R2
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryOn May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing new lug nuts or the accessory Wheel Lock Set, make sure to use the appropriate part number for the vehicle you are working on.
Associated Products (10)Associated Documents