Mazda CX-90 Service Bulletins
502 manufacturer communications on file.
- July 26, 2024•Document ID: 11005580Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-043-24
- Date Added:
- August 5, 2024
- Manufacturer:
- MAZDA
SummarySome customers will report their window will not auto-close. This may be caused by the vehicle learning the window current draw incorrectly because the door moved when the initialization was performed.
Associated Products (3)Associated Documents - July 26, 2024•Document ID: 11005579Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- SA-042-24
- Date Added:
- August 5, 2024
- Manufacturer:
- MAZDA
SummarySome customers will report that their fuel filler lid (door) was stuck closed and would not open to refuel the vehicle. The fuel door may or may not be missing.
Associated Products (3)Associated Documents - July 25, 2024•Document ID: 11005578Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- SA-041-24
- Date Added:
- August 5, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience the automatic seat position adjustment operation being interrupted when adjusting the seat position using the driver personalization system or the position memory system. This unintentional interruption may be caused by the safety mechanism that stops the seat adjusting function when the sensor detects an interference, such as a trapped object caught in the seat track.
Associated Products (3)Associated Documents - July 25, 2024•Document ID: 11005563Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- SA-030-24a
- Date Added:
- August 3, 2024
- Manufacturer:
- MAZDA
SummarySome vehicles may experience a warning light ON, warning messages, or a headlamp concern. After checking the vehicle, DTC B10A3:86 may be stored with or without other DTCs. Follow the repair procedure below for B10A3:86. Customers having this concern should have their vehicle repaired using the following repair procedure.
Associated Products (3)Associated Documents - July 24, 2024•Document ID: 11005559Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-003-24a
- Date Added:
- August 2, 2024
- Manufacturer:
- MAZDA
SummarySome customers with a PHEV CX-90 may report a warning light or a reported issue of A/C malfunction. Upon inspection, the technician will discover that the vehicle has the P0531 diagnostic trouble code set.
Associated Products (3)Associated Documents - July 23, 2024•Document ID: 11005577Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-034-24a
- Date Added:
- August 5, 2024
- Manufacturer:
- MAZDA
SummaryThis Service Alert provides additional guidance about operation and procedure of the Driver Personalization System from the start of driver recognition to the end of the driving position restoration. Timing (start/completion/discontinuing) of driver recognition and a driving position restoration:
Associated Products (3)Associated Documents - July 19, 2024•Document ID: 11005558Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 30-001-24
- Date Added:
- August 2, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain that the normal charge connector is stuck in the charging port and cannot be removed, or that it is difficult to disconnect. This may be caused by the lock pin that is installed at the charge port to fasten the normal charge cable during charging. If the worm gear that moves the lock pin has insufficient grease, the resistance to the movement increases and the lock pin cannot be released properly. To eliminate this concern, the method of grease application to the worm gear has been revised.
Associated Products (1)Associated Documents - July 19, 2024•Document ID: 11005554Service Bulletin/Repair InstructionsLANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; SERVICE BRAKES
- Mfr Comm. #:
- 15-001-24a
- Date Added:
- August 2, 2024
- Manufacturer:
- MAZDA
SummaryUpdate software release for emergency lane keeping and/or smart brake support operation. This TSB has been superseded by SSPD6.
Associated Products (1)Associated Documents - July 18, 2024•Document ID: 11005551Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-036-24
- Date Added:
- August 2, 2024
- Manufacturer:
- MAZDA
SummaryAt PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. • Wrinkles may not be completely removed after the repair is completed. • Leather is a natural material and may develop some wrinkles due to aging and wear during normal useage.
Associated Products (31)2025 Mazda CX-302025 Mazda CX-52025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-302022 Mazda CX-5+ 11 moreAssociated Documents - July 12, 2024•Document ID: 11005560Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SA-004-24
- Date Added:
- August 3, 2024
- Manufacturer:
- MAZDA
SummaryClick here to view coolant bleeding procedure.
Associated Products (3)Associated Documents - July 10, 2024•Document ID: 11005711Service CampaignVEHICLE SPEED CONTROL; SERVICE BRAKES; VISIBILITY/WIPER; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; BACK OVER PREVENTION: WARNINGS
- Mfr Comm. #:
- SSPD6 FC
- Date Added:
- August 6, 2024
- Manufacturer:
- MAZDA
SummarySSPD6 - SPECIAL SERVICE PROGRAM - VEHICLE CONTROL MODULE (VCM) PROGRAMMING - 2024 CX-90 SSPD6 - 2024 CX-90 - Vehicle Control Module (VCM) Reprogramming: This campaign will resolve three different concerns. Unintentional warning or braking when backing up. When backing up the vehicle in a parking lot or similar area, the View Monitor Camera (VMC) may detect certain physical obstacles lower to the ground such as, the tires of an adjacent vehicle, parking lines, plants, etc. even though there are no obstacles behind the vehicle. Under this condition, the Smart Brake Support (SBS) system may determine that there is a possibility of a collision, notifying with a visual (screen display) and audible (warning sound), and the brakes possibly being applied in certain cases. Driver recognition result is not displayed (on equipped vehicles) The Driver Personalization system may not recognize the driver’s face to change the seat position settings that have been programmed. In this case the vehicle interprets the driver as a “guest” (non-personalized). The vehicle driver must be in the driver’s seat within 15 seconds of unlocking the vehicle to initiate the Driver Recognition function. Mazda Radar Cruise Control (MRCC) may reduce speed to match adjacent lane vehicle While driving on a curved road condition with the Mazda Radar Cruise Control (MRCC) activated, a vehicle in the right or left lane may be detected as a vehicle in front of the CX-90 and the MRCC will unexpectedly reduce vehicle speed to match the detected vehicle. The repair will be reprogramming the VCM with modified software via M-MDS, using MDARS. There are 28,404 vehicles in the campaign in the U.S. and U.S. Territories.
Associated Products (1)Associated Documents - July 8, 2024•Document ID: 11005543Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 09-002-24c
- Date Added:
- August 2, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern. CX-70 / CX-90 NOTE: This repair is also applicable for a "WARNING MESSAGE FOR AVAS MALFUNCTION WITH DTC B1A03:2B" concern.
Associated Products (5)Associated Documents - July 2, 2024•Document ID: 11005562Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- SA-019-24b
- Date Added:
- August 3, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience a vehicle no start (no "Ready-ON") due to the 12V battery discharged or the High Voltage (HV) battery discharged. This may be caused by: Ignition left ON when exiting the vehicle (exiting the vehicle during "Ready-On"). Door/liftgate opened multiple times without ignition "Ready-ON" or driving vehicle. Installation of aftermarket electronic devices. To minimize the battery drain concern, ensure that the vehicle shift selector is in Park when exiting and verify the ignition is turned OFF when exiting. NOTE: If multiple door/liftgate opening without "Ready-ON', drive vehicle to charge 12V battery.
Associated Products (3)Associated Documents - July 2, 2024•Document ID: 11005561Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-018-24a
- Date Added:
- August 3, 2024
- Manufacturer:
- MAZDA
SummaryThe 7G large platform utilizes a new 8-speed automatic transmission. Due to changes in the parking lock mechanism, which is now hydraulically operated, the neutral range in the transmission can only be achieved if the engine is running (or “Ready-On” for PHEV). With this design, there is no provision to manually engage neutral. This can cause challenges to dealers, customers, or towing providers when a vehicle cannot start and can't move, usually due to a discharged (dead) battery. In the event that a vehicle cannot be started or achieve “ready-on”, wheel dollies must be used to allow the vehicle to be rolled and moved. NOTE: The following procedure is for moving vehicle around the service shop and not for towing purposes. Please reference the owner's manual for towing instructions.
Associated Products (3)Associated Documents - July 2, 2024•Document ID: 11005538Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-001-24e
- Date Added:
- August 2, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience a “Telematics Malfunction” message in the instrument cluster with DTC U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.
Associated Products (21)2025 Mazda CX-702024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302021 Mazda CX-302021 Mazda CX-52021 Mazda CX-9+ 1 moreAssociated Documents - June 29, 2024•Document ID: 11003395OtherUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-009-24b
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummaryMazda Connected Services - Frequently Asked Questions (FAQ)
Associated Products (22)2025 Mazda CX-702024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302021 Mazda CX-302021 Mazda CX-5+ 2 moreAssociated Documents - June 28, 2024•Document ID: 11003221Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 05-004-24
- Date Added:
- July 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain about shift shock during 1-2 shift when the vehicle is cold (ATF temperature is 86 °F (30 °C) or lower). This concern most likely occurs on the vehicle with certain versions of TCM file name as follows: This may be caused by improper hydraulic pressure control of the automatic transmission. To eliminate this concern, the control software of the TCM has been modified.
Associated Products (1)Associated Documents - June 28, 2024•Document ID: 11003217Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM; ENGINE
- Mfr Comm. #:
- 01-004-24a
- Date Added:
- July 4, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain about a noise from the engine compartment at idle. This may be caused by the fuel injection learning cycle at idle from the high pressure fuel pump. To eliminate this concern, the control software of the PCM has been modified.
Associated Products (1)Associated Documents - June 22, 2024•Document ID: 11003355Service Bulletin/Repair InstructionsSEAT BELTS
- Mfr Comm. #:
- 09-002-24b
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummarySome customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern. CX-70 / CX-90 NOTE: This repair is also applicable for a "WARNING MESSAGE FOR AVAS MALFUNCTION WITH DTC B1A03:2B" concern.
Associated Products (4)Associated Documents - June 22, 2024•Document ID: 11003354Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- 09-001-24d
- Date Added:
- July 5, 2024
- Manufacturer:
- MAZDA
SummarySome customers may experience a “Telematics Malfunction” message in the instrument cluster with DTC U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.
Associated Products (20)2025 Mazda CX-702024 Mazda CX-302024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda3Associated Documents