Kia Sorento Complaints
10,397 consumer complaints on file.
- #11753358July 28, 2026UNKNOWN OR OTHER
I am submitting this complaint regarding what I believe is a premature paint defect on my Kia vehicle that has resulted in exposed bare metal and the development of rust on my vehicle. The factory paint has begun peeling and chipping away without any collision, misuse, or abnormal wear. As the paint has separated from the metal surface, it has exposed multiple areas of bare metal that are now actively rusting. I have attached photographs documenting the condition. While paint deterioration may initially appear cosmetic, I believe this issue presents potential safety concerns because the failed paint no longer protects the vehicle's metal body from corrosion. Continued exposure to moisture and environmental elements can allow rust to spread, which may: Accelerate corrosion of the vehicle's body panels. Weaken the structural integrity of affected components over time. Increase the likelihood of water intrusion into the vehicle, potentially damaging electrical components. Reduce the effectiveness of corrosion protection designed into the vehicle. Negatively impact the vehicle's resale value and long-term reliability. This condition appears to be the result of a failure in the factory paint system rather than normal wear and tear. The paint is peeling prematurely, exposing metal that should remain protected throughout the expected life of the vehicle. I am requesting that NHTSA review whether this paint failure represents a broader manufacturing defect affecting other Kia vehicles and determine whether an investigation is warranted if similar complaints exist. Additionally, I respectfully request that Kia acknowledge this premature paint failure as a manufacturing defect and cover the cost of restoring the affected panels, including proper rust remediation, surface preparation, priming, and repainting. Simply touching up the exposed areas would not adequately address the underlying defect or prevent continued corrosion. Owners should not be responsible for r
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11753389July 28, 2026SERVICE BRAKES
I took my car to a mechanic. Said ABS Control Module failed. This is a safety issue and should be replaced. Brakes are not stopping as well as they should should and don't vibration while going down a steep incline. Had to push really hard for the brakes to stop. Just put me and my family at risk. No warning lights. During testing by the mechanic he noticed the car shifts to the side when putting on the brakes.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752935July 26, 2026ENGINE
While I was driving, my 3.3 V6 engine on my 2016 Kia Sorento seized up with no warning. There is no visible oil on the dip stick, although I have changed my oil routinely. There has never been visible oil outside of the engine or on the ground. I never had any warning light come on. I believe the engine burns an extreme amount of oil, which is putting people in a dangerous situation and financial hardship.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752940July 26, 2026POWER TRAIN, FUEL/PROPULSION SYSTEM, ENGINE
"The vehicle has twice suffered a sudden, catastrophic loss of motive power at highway speeds (approx. 70 MPH) on the interstate, forcing the driver to coast across active traffic to the shoulder without engine pull. The engine revs freely in 'Drive' but the transmission fails to engage any gears. No dashboard warning lights, check engine lights, or diagnostic trouble codes are triggered during or after the failure. The failure resets temporarily only after cycling the ignition key off and on.The vehicle previously had Safety Recall SC250 (8-speed Electric Oil Pump) performed by an authorized dealer, but the software flash completely failed to prevent this catastrophic hydraulic/electronic failure mode or provide the federally mandated dashboard warning countdown. The vehicle is entirely unsafe to drive,
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752597July 24, 2026POWER TRAIN
See attached document for complaint.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752340July 23, 2026ENGINE
On Saturday the 18th of July, the car was fine, on Sunday 07/19/2026 got ready to take car to regular scheduled oil change and it was making a blown engine noise, the rod had failed, Safety issues where the people at oil change could have had a rod thrown out the bottom of the engine, or my car could have failed in the middle of the road causing an accident. No warning signs, no limp mode, no engine light, no noted metal in oil on previous oil changes. Inspected at Kia, does not meet any recall warranties, however service manager at West Hills Kia stated this is in an internal engine failure and should not have happened with our service records and care of vehicle.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752370July 23, 2026UNKNOWN OR OTHER
On [XXX], at approximately [XXX], I attempted to replace a flat tire on my 2025 Kia Sorento while the vehicle was parked on a flat, firm paved surface. I used the factory-supplied emergency scissor jack, rated at 1,200 kg or 2,645.5 lbs. and placed it at the designated factory pinch-weld jacking point. The plugin hybrid Kia Sorrento has a curb weight of over 4000 lbs which is more than the rated weight of the Kia supplied car jack. This is extremely irresponsible and dangerous. While raising the vehicle only enough to remove and replace the tire, the jack’s structural frame buckled, bent, and popped out from under the vehicle causing the vehicle suddenly fall back to the ground. While no one was hurt in the incident someone could have been injured or killed by the falling vehicle or by the car jack which popped out from under the car as it was crushed. In this instance, no one was underneath the vehicle, and no injury occurred although it would have been very easy for this to have resulted in serious injury or death if the jack failure occurred while the tire was removed or a tire iron engaged during the failure. I feel fortunate to not have been seriously injured. There was no visible deformations or other symptoms before the failure. The problem was not reproduced because the jack sustained permanent structural damage and could not safely be used again. The vehicle and failed jack were inspected by Serramonte Kia, 600 Serramonte Boulevard, Colma, CA 94014, on [XXX], at approximately [XXX]. The failed jack has been retained and is available for inspection upon request. Photographs and dealership documentation are also available. Because Kia supplied this jack specifically for emergency tire changes on this vehicle, and it failed during its intended use under proper conditions, I request investigation into whether the jack has inadequate structural strength or design margin, defective materials or manufacturing, or another safety defect INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752405July 23, 2026ENGINE, FUEL/PROPULSION SYSTEM
AC stopped, engine began to struggle, engine light came on and engine over heated. Pulled off highway to be towed. Dealer found metal in oil and suggested possible manufacturer defect issue.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752517July 23, 2026SERVICE BRAKES, UNKNOWN OR OTHER, ELECTRICAL SYSTEM
This is a follow up of NHTSA case# 1840444. Complaint Description: Vehicle exhibited active CAN-bus communication timeout code DTC C1642 targeting the Hydraulic Electronic Control Unit (HECU). Following the official technical safety guidelines established under NHTSA Campaign 20V519000 (Kia SC197), an isolated parasitic current draw test was performed between the engine junction box positive power post and the ABS2 circuit terminal. Testing across three independent iterations utilizing a digital multimeter confirmed a continuous localized parasitic draw of 218.6 uA. This dramatically exceeds the manufacturer's maximum safety engineering threshold of 70.0 uA by over 312%. This quantified excessive amperage draw conclusively isolates an internal circuit board short-circuit condition caused by a failure of the internal HECU brake fluid seals. The vehicle presents an immediate network communication failure, brake malfunction, and thermal/fire risk. Kia Corporate must be compelled to immediately authorize an expedited, zero-cost component replacement under the active safety recall mandate.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11752489July 23, 2026POWER TRAIN
Recall 22V-760 was performed, but the remedy failed, the exact same safety code has returned, and the manufacturer is refusing to replace the failed hardware component.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751993July 22, 2026FUEL/PROPULSION SYSTEM, ENGINE
previous warranty repair for a failed fuel injector (RO #1103175) resulted in severe gasoline dilution of the engine oil. the vehicle now vents raw fuel vapors into the cabin (Fire Hazard) and hesitates/jerks when braking at stoplights (Stall/Crash Hazard). Kia Corporate has refused to communicate for over two weeks while the dealer holds the car.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751892July 21, 2026POWER TRAIN, ELECTRICAL SYSTEM
The electric oil pump circuit board for the transmission failed, causing motive power loss. The vehicle is currently located at Ourisman Chantilly Kia and is available for inspection. Safety was compromised due to sudden loss of drive power while operating on public roads, creating a severe crash hazard. The failure was diagnosed and confirmed by Ourisman Chantilly Kia service department, which retrieved active Diagnostic Trouble Code P1C2D03. The vehicle was inspected by the Kia dealership service department. Prior to failure, check engine/warning lights illuminated and transmission drive symptoms appeared. This vehicle is subject to Recall SC250. A software update was performed under a previous owner, but the physical component failed. Kia is refusing replacement because the recall was marked "closed" after the software patch, leaving a known unaddressed safety defect active on the vehicle.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751825July 21, 2026ENGINE, POWER TRAIN
I am filing this complaint regarding my 2021 Kia Sorento, which has suffered a transmission failure. The transmission slips, shifts harshly, hesitates during acceleration, loses power unexpectedly, and has become unsafe to drive. This defect has put my safety and the safety of others at risk. On several occasions the vehicle failed to respond properly when accelerating, including while entering highways and driving in traffic. The hesitation and sudden loss of power created fear and anxiety because I could not trust the vehicle to operate as expected. The problem has been reproduced and confirmed by a repair facility, and the symptoms are consistent with a transmission torque converter clutch failure. I also contacted Kia and provided the vehicle information. Kia informed me that they would not repair the vehicle because it has exceeded 100,000 miles and that the recall or warranty extension had expired. However, my vehicle is experiencing the same transmission-related symptoms reported by many other Kia owners.I never received any recall notification because I purchased the vehicle from a dealership as the second owner. Had I been properly notified, I would have taken the vehicle in for inspection much earlier or would never have purchased the dangerous vehicle in the first place. It is extremely frustrating and costly to be denied assistance solely because of mileage when the failure appears to be related to a known transmission defect.Before the failure, the check engine light illuminated and then went away even though the issue did not. Prior to that warning, the vehicle had already shown delayed shifting, slipping, hesitation, rough gear changes, and loss of power, which became progressively worse. I reported this to Kia on a previous service visit to Romeo Kia in Lake Katrine, NY and was told they did not find anything wrong. This situation has caused significant emotional stress and anxiety. I am requesting a full review and a fair resolution from kia. Thank
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751824July 21, 2026UNKNOWN OR OTHER, VISIBILITY/WIPER
The panoramic sunroof on my 2023 Kia Sorento intermittently fails to close. When commanded to close, the glass travels most of the way, then stops or reverses before reaching the fully closed position. It frequently takes many repeated attempts. In some cases the panel will not seat at all until the vehicle is driven over rough pavement, and the resulting vibration allows it to complete closure. The malfunction is accompanied by a loud grinding or scraping noise from the roof assembly during travel. This condition has been present since I purchased the vehicle new. The sunroof has seen very limited use. Safety risk: the glass panel cannot be reliably secured. An open or unseated panoramic panel at highway speed presents a risk of water intrusion, wind loading on an unsecured glass panel, and loss of roof structure integrity. Repeatedly operating the switch and monitoring the panel while driving is a significant distraction from the driving task, and driving specifically to induce vibration in order to force closure is itself an unsafe workaround. Dealer history: I have reported this to a Kia dealership on multiple occasions. I was told there is no defect and that the cause is debris, which is inconsistent with a vehicle purchased new with minimal sunroof use. On one visit the dealer cleaned the assembly as a goodwill gesture. This did not correct the noise or the closure failure. The vehicle was returned to me as repaired while the noise and the failure to close were both still present. Kia issued Technical Service Bulletin BOD125 (Rev 1, 02/27/2017) describing a slow-to-close condition and abnormal closing noise on the prior-generation Sorento (UMa), remedied by cleaning and lubricating the rear guide rails and replacing the rear tilt levers. My vehicle exhibits the same failure mode described in that bulletin. The component is available for inspection on request. No warning lamps or messages preceded or accompanied the failure.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751821July 21, 2026POWER TRAIN
The contact owns a 2022 Kia Sorento. The contact stated that while attempting to start the vehicle, the gear shifter was shifted to drive; however, the transmission failed to engage as intended. The accelerator pedal was depressed, and the vehicle unexpectedly rolled backwards. No warning lights were illuminated. The vehicle was taken to the dealer; however, the failure was not duplicated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The failure was a persistent failure. The manufacturer was not made aware of the failure. The failure mileage was approximately 50,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751796July 21, 2026ENGINE, POWER TRAIN
I have a 2023 Kia Sorento with approx 60k, purchased new from New Pot Richey Kia. Approx 7 days ago, while driving home from dropping my son at school, my transmission system error warning came on as well as my check engine light. My RPM'S would increased without corresponding acceleration, which meant my transmission, was slipping. I was also experiencing jerking during shifting. In addition to that, my car would hesitate before moving. And I would also experience a slight vibrations at low speeds. All of this would make me feel unsafe when driving my car.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751488July 20, 2026ENGINE
Spontaneous fire under hood. Nothing was malfunctuoing, no warning lights. All fluids were good, no temp issues. Parked to to run inside to use rr, was paged and came out car is on fire
- Crash:
- No
- Fire:
- Yes
- Injuries:
- 0
- Deaths:
- 0
- #11751596July 20, 2026POWER TRAIN
The vehicle experienced a sudden and dangerous loss of motive power while driving due to a failure of the 8-speed dual-clutch transmission's (DCT) high-pressure electric oil pump causing loss of shifting and dropping to lower gears at a very high rpm and slowing the car almost instantly creating a hazard for a crash with following vehicles. This vehicle was previously serviced under Kia Safety Recall Campaign SC250 (NHTSA ID: 22V-760). However, the initial recall remedy failed to permanently resolve the underlying defect. Despite the recall work being marked as completed, the transmission component has failed again.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751372July 19, 2026POWER TRAIN
I have a 2016 kia sorento I was having a problem with the shifter it would not go into park and had to use the shift override button I contacted the dealer there was an active recall they refused to repair or replace the shifter because it was inspected by the dealer in 2022 and as far as they where concerned that satisfied the recall The recall is still valid, and does not have close date how can they refuse to repair . It is still a safety issue
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11751409July 19, 2026POWER TRAIN, ENGINE
I recently took my 2016 Kia Sorento L to the Kia dealership for the Emissions update recall. The next day when I started it up and put it in drive, it started jerking hard when I was trying to speed up (going from first to second gear). I had to stop and then slowly push the gas so it wouldn't jerk so hard, then it finally switched gears and was smooth. Ever since it's happening only at the first cold start up of the day, and have sluggish acceleration throughtout the day. No lights on or codes. I took back to dealership twice and they said they couldn't replicate it and so they aren't sure, but it definitely still does it (anyone riding with me notices before I even mention it).
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0