Dodge Durango Service Bulletins
2,085 manufacturer communications on file.
- October 21, 2015•Document ID: 10217423Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 25-002-15 REV. B
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryP0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10217372Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- 68166105A$
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryPart Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual.
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10216185Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 25-002-15 REV. B
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryP0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10216134Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN; ELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- 68166105A$
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryPart Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual.
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10151766Service Bulletin/Repair InstructionsENGINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- 25-002-15 REV-B
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryP0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10151715Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 68166105A
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryPart Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual.
Associated Products (2)Associated Documents - October 14, 2015•Document ID: 10217413Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 24-005-15
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryFlash: Temperature Control Enhancement This bulletin involves reprogramming the HVAC Module with new software. Customers may experience the following condition: ? Vehicle cabin temperature seems too warm even after reducing the Automatic Temperature Control setpoint. ? Heat mode becomes active when the radio is configured to read in °C and cabin temperature is set to LO. Updating the HVAC software will correct these conditions.
Associated Products (2)Associated Documents - October 14, 2015•Document ID: 10217368Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- L0003157$$
- Date Added:
- August 8, 2022
- Manufacturer:
- DODGE
SummaryPart Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 [email protected], if you have further questions.
Associated Products (1)Associated Documents - October 14, 2015•Document ID: 10216175Service Bulletin/Repair InstructionsVISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:COMPRESSOR:MODULE (ACCM); ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 24-005-15
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryFlash: Temperature Control Enhancement This bulletin involves reprogramming the HVAC Module with new software. Customers may experience the following condition: ? Vehicle cabin temperature seems too warm even after reducing the Automatic Temperature Control setpoint. ? Heat mode becomes active when the radio is configured to read in °C and cabin temperature is set to LO. Updating the HVAC software will correct these conditions.
Associated Products (2)Associated Documents - October 14, 2015•Document ID: 10216130Service Bulletin/Repair InstructionsEQUIPMENT; EXTERIOR LIGHTING:TURN SIGNAL:BULBS
- Mfr Comm. #:
- L0003157$$
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryPart Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 [email protected], if you have further questions.
Associated Products (1)Associated Documents - October 14, 2015•Document ID: 10151756Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 24-005-15
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryFlash: Temperature Control Enhancement This bulletin involves reprogramming the HVAC Module with new software. Customers may experience the following condition: ? Vehicle cabin temperature seems too warm even after reducing the Automatic Temperature Control setpoint. ? Heat mode becomes active when the radio is configured to read in °C and cabin temperature is set to LO. Updating the HVAC software will correct these conditions.
Associated Products (2)Associated Documents - October 14, 2015•Document ID: 10151711Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TURN SIGNAL
- Mfr Comm. #:
- L0003157
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryPart Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 [email protected], if you have further questions.
Associated Products (1)Associated Documents - October 9, 2015•Document ID: 10217400Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN; FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING
- Mfr Comm. #:
- 21-027-15 REV. C
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience an erroneous Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find a Diagnostic Trouble Code (DTC) stored in the TCM memory. In addition, the following TCM calibration improvements are also available for vehicles equipped with the 845RE 8 speed transmission (Sales Code DFL). These improvements are listed per engine application. 3.0L Gas Engine (Sales Code EHD) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved upshift timing. ? Improved torque converter engagement. ? Improved shift timing during tow mode operation. ? Improved shift points during aggressive driving. ? Calibration improvement to correct bump feel during 2-1 downshift. ? Improved shift timing while in snow, base, and hill modes. 3.6L Gas Engine (Sales Code ERB) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved 4-3 and 3-2 downshifts. ? Improved shift timing at higher altitudes. ? Improved shift timing while in sand mode. ? Calibration improvement for multi-gear downshift timing during passing maneuvers. ? Calibration improvement for intermittent delayed upshift.
Associated Products (2)Associated Documents - October 9, 2015•Document ID: 10216162Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; POWER TRAIN; ENGINE
- Mfr Comm. #:
- 21-027-15 REV. C
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience an erroneous Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find a Diagnostic Trouble Code (DTC) stored in the TCM memory. In addition, the following TCM calibration improvements are also available for vehicles equipped with the 845RE 8 speed transmission (Sales Code DFL). These improvements are listed per engine application. 3.0L Gas Engine (Sales Code EHD) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved upshift timing. ? Improved torque converter engagement. ? Improved shift timing during tow mode operation. ? Improved shift points during aggressive driving. ? Calibration improvement to correct bump feel during 2-1 downshift. ? Improved shift timing while in snow, base, and hill modes. 3.6L Gas Engine (Sales Code ERB) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved 4-3 and 3-2 downshifts. ? Improved shift timing at higher altitudes. ? Improved shift timing while in sand mode. ? Calibration improvement for multi-gear downshift timing during passing maneuvers. ? Calibration improvement for intermittent delayed upshift.
Associated Products (2)Associated Documents - October 9, 2015•Document ID: 10151743Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 21-027-15 REV-C
- Date Added:
- December 17, 2018
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience an erroneous Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find a Diagnostic Trouble Code (DTC) stored in the TCM memory. In addition, the following TCM calibration improvements are also available for vehicles equipped with the 845RE 8 speed transmission (Sales Code DFL). These improvements are listed per engine application. 3.0L Gas Engine (Sales Code EHD) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved upshift timing. ? Improved torque converter engagement. ? Improved shift timing during tow mode operation. ? Improved shift points during aggressive driving. ? Calibration improvement to correct bump feel during 2-1 downshift. ? Improved shift timing while in snow, base, and hill modes. 3.6L Gas Engine (Sales Code ERB) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved 4-3 and 3-2 downshifts. ? Improved shift timing at higher altitudes. ? Improved shift timing while in sand mode. ? Calibration improvement for multi-gear downshift timing during passing maneuvers. ? Calibration improvement for intermittent delayed upshift.
Associated Products (2)Associated Documents - October 9, 2015•Document ID: 10058366Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SB-21-027-15REVA
- Date Added:
- September 5, 2015
- Manufacturer:
- DODGE
SummaryJEEP/DODGE: INFORMATION PROVIDED REGARDING THE MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATES AND LATEST SOFTWARE AVAILABLE FOR REPROGRAMMING TRANSMISSION CONTROL MODULE (TCM) TO IMPROVE ENHANCEMENT SHIFTING. MODEL 2015 GRAND CHEROKEE, DURANGO. *PE UPDATED 11/9/15 *CN UPDATED 12/03/15 *CN
Associated Products (2)Associated Documents - October 7, 2015•Document ID: 10058553Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SB 11575
- Date Added:
- October 7, 2015
- Manufacturer:
- DODGE
SummaryFIAT CHRYSLER: FREQUENTLY ASKED QUESTIONS CONCERNING CERTAIN RECALLED VEHICLES THAT ARE NOT REPAIRED *CN
Associated Products (4)Associated Documents - October 6, 2015•Document ID: 10217390Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 18-070-15
- Date Added:
- August 8, 2022
- Manufacturer:
- DODGE
SummaryFlash: PCM Software Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P0301- Cylinder 1 Misfire ? P0302- Cylinder 2 Misfire ? P0303- Cylinder 3 Misfire ? P0304- Cylinder 4 Misfire ? P0305- Cylinder 5 Misfire ? P0306- Cylinder 6 Misfire ? P0300- Multiple Cylinder Misfire ? P0513- Invalid SKIM Key
Associated Products (2)Associated Documents - October 6, 2015•Document ID: 10216152Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM; EQUIPMENT; POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 18-070-15
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryFlash: PCM Software Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P0301- Cylinder 1 Misfire ? P0302- Cylinder 2 Misfire ? P0303- Cylinder 3 Misfire ? P0304- Cylinder 4 Misfire ? P0305- Cylinder 5 Misfire ? P0306- Cylinder 6 Misfire ? P0300- Multiple Cylinder Misfire ? P0513- Invalid SKIM Key
Associated Products (2)Associated Documents - October 6, 2015•Document ID: 10151733Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 18-070-15
- Date Added:
- December 17, 2018
- Manufacturer:
- JEEP
SummaryFlash: PCM Software Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P0301- Cylinder 1 Misfire ? P0302- Cylinder 2 Misfire ? P0303- Cylinder 3 Misfire ? P0304- Cylinder 4 Misfire ? P0305- Cylinder 5 Misfire ? P0306- Cylinder 6 Misfire ? P0300- Multiple Cylinder Misfire ? P0513- Invalid SKIM Key
Associated Products (2)Associated Documents