2023-2025 Tonale / Hornet Remote Start Parking Lamp Issue
If your 2023-2025 Alfa Romeo Tonale or Dodge Hornet's parking lamps don't light up when using remote start, a simple setting adjustment in the infotainment system can resolve the issue. This technical service bulletin, S2508000047, details how to enable the 'Flash Lamps With Lock' feature.

También aplica a
- Alfa Romeo Tonale
- 2024
- Dodge Hornet
- 2023–2025
Owners of 2023-2025 Alfa Romeo Tonale and Dodge Hornet vehicles may experience an issue where the parking lamps fail to illuminate when the vehicle is started remotely. This condition, detailed in Stellantis Technical Service Bulletin S2508000047, specifically affects the vehicle's electrical system related to remote start functionality, leading to the symptom of Tonale Hornet remote start parking lamps not illuminating.
This bulletin, released in June 2025, provides a straightforward solution for this specific symptom, ensuring proper vehicle operation and visibility during remote start sequences. The STAR Online Publication S2508000047 outlines steps for technicians and owners to address this without complex diagnostics.
Symptoms
The primary symptom observed by owners is that the "Parking Lamps do Not Illuminate When the Vehicle is Remotely Started". This means that while other remote start functions may operate correctly, the exterior parking lights, which typically provide visibility and confirm the vehicle's status, remain off. This issue is consistent across affected 2023-2025 Alfa Romeo Tonale and Dodge Hornet models.
Fault Codes / DTCs
Importantly, this specific issue does not trigger any Diagnostic Trouble Codes (DTCs). Technicians observing the symptom will find that no modules have set any DTCs, indicating that the problem is not a system fault but rather a configuration or communication anomaly that prevents the parking lamps from activating as expected during a remote start command.
Diagnosis / Trigger Conditions
Diagnosis for this condition is relatively simple. The parking lamps are expected to function normally during all other operations, such as when the vehicle is manually started or when the lights are turned on via the control stalk. The problem is isolated to the remote start sequence. If the lamps work correctly in all other scenarios and no DTCs are present, the issue aligns with the conditions described in TSB S2508000047. This confirms the Tonale Hornet remote start parking lamps issue is likely a setting rather than a hardware failure.
Repair Procedure Summary
The repair for this issue involves a simple adjustment within the vehicle's infotainment system. The steps are as follows:
- Access the Radio Menu: Enter the radio or infotainment system's main menu. This is the central hub for vehicle settings.
- Navigate to Lights Settings: Locate and select the 'Lights' settings option within the menu. The provided image shows this option clearly visible under the 'Vehicle' section of the settings.
- Verify 'Flash Lamps With Lock' Setting: Ensure that the "Flash Lamps With Lock" setting is selected (turned on). This setting, as depicted in the infotainment screen image, controls the behavior of the exterior lights in certain scenarios.
- Toggle the Setting: Even if the "Flash Lamps With Lock" setting appears to be already 'on', it is crucial to toggle it. This means turning the setting off and then immediately turning it back on. This action helps to re-register the setting within the vehicle's electronic control modules.
- Allow Full BUS Sleep Cycle: After toggling the setting, the vehicle must be allowed to enter a full BUS sleep cycle. This typically involves turning off the vehicle, exiting, and letting it sit undisturbed for a period. This allows all electronic modules to power down completely and accept the changes made to the setting.
Once these steps are completed, the setting should be accepted, and the parking lamps should illuminate as expected during a remote start command.
Important Warnings
This document, identified as Stellantis STAR Online Publication S2508000047, does not authorize warranty repairs. It serves as a record of past experiences and does not provide conclusions about what is wrong with the vehicle. It captures known cases related to the symptom. Technicians are advised that they are the expert and responsible for deciding on the appropriate course of action. If a solution is not found, contact STAR Center or Technical Assistance Center via TechConnect, eCONTACT, or Service Library entry.
Source: NHTSA ID: S2508000047
Frequently Asked Questions
- What is the problem described in TSB S2508000047?
- The TSB S2508000047 addresses an issue where the parking lamps on 2023-2025 Alfa Romeo Tonale and Dodge Hornet vehicles do not illuminate when the vehicle is started remotely. This is specifically the 'Parking Lamps do Not Illuminate When the Vehicle is Remotely Started' symptom.
- Are there any fault codes associated with the 'Parking Lamps do Not Illuminate When the Vehicle is Remotely Started' issue?
- No, the bulletin specifically states that this issue occurs without any Diagnostic Trouble Codes (DTCs) being set in the vehicle's modules. This indicates it's a configuration issue rather than a component failure.
- How can I fix the Tonale Hornet remote start parking lamps issue?
- You can resolve this by accessing the radio menu, navigating to the lights settings, and ensuring the 'Flash Lamps With Lock' option is selected. Toggling this setting (turning it off then on) and allowing the vehicle to enter a full BUS sleep cycle should correct the behavior.
- What does 'Flash Lamps With Lock' mean and why is it related to remote start?
- The 'Flash Lamps With Lock' setting typically controls whether the exterior lights flash when you lock the vehicle. For the remote start issue, ensuring this setting is enabled and properly registered in the system helps the vehicle's electrical system properly activate the parking lamps during a remote start command, as described in the Stellantis STAR Online Publication.
- What is a 'full BUS sleep cycle' and why is it important for this fix?
- A 'full BUS sleep cycle' refers to the vehicle's electronic control units (ECUs) completely powering down after the vehicle is turned off. It's important for this fix because it allows the system to fully register and apply the changes made to the 'Flash Lamps With Lock' setting, ensuring the parking lamps function correctly with remote start.
Related Articles
2023-2025 Alfa Romeo Tonale / Dodge Hornet FOTA Update
Stellantis TSB 08-148-26 details a mandatory Firmware Over The Air (FOTA) update for 2023-2025 Alfa Romeo Tonale and Dodge Hornet models. This update enables Active Cabin Ventilation (ACV) and is delivered via the vehicle's cellular modem. Owners must accept the update when prompted.
2021-2026 Stellantis Uconnect 5 Radio Software Update Errors
This Stellantis TSB S228A000025 Rev A details various Harman R1H Uconnect 5 radio software flash error codes, such as (-2), (-3), (-4), (-5), (-9), (-11), (-13), and (-18), that prevent successful updates. It provides specific dealer corrective actions for each error to resolve issues like…
2025 Alfa Romeo Tonale Cabin Preconditioning TSB 08-044-26
This Technical Service Bulletin (TSB) 08-044-26 addresses instances where the 2025 Alfa Romeo Tonale may display a "Cabin Preconditioning Unavailable" message and fail to perform scheduled cabin preconditioning. It requires software updates to the Auxiliary Hybrid Control Processor (AHCP) and…
2025 Alfa Romeo Tonale Cabin Preconditioning TSB 08-402-25
If your 2025 Alfa Romeo Tonale isn't performing scheduled cabin preconditioning and displays 'Cabin Preconditioning Unavailable', TSB 08-402-25 outlines a software update for the Power Inverter Module (PIM) to resolve the issue.
2025 Alfa Romeo Tonale PCM Update for DTC P2450
Alfa Romeo has released Technical Service Bulletin (TSB) 18-100-25 for 2025 Tonale models, addressing Malfunction Indicator Lamp (MIL) illumination, Diagnostic Trouble Code P2450 (Fuel Tank Isolation Valve 'A' Circuit Open), and fuel door issues. The fix involves a Powertrain Control Module (PCM)…
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.