Ram 4500 Service Bulletins
1,927 manufacturer communications on file.
- December 18, 2014•Document ID: 10229908Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 1800214
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFlash: 6.7L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM/PCM) with new software. Several software improvements are available for vehicles equipped with a Cummins 6.7L turbo Diesel.Prevent Or Reduce Malfunction Indicator Lamp (MIL) Illumination When No Defect is Present For The Following Diagnostic Trouble Codes (DTCs). These Faults Have Been Changed From A One Trip Fault To A Two Trip Fault: P0201 - P0206 - Fuel Injector X Circuit/Open Fault Codes.
Associated Products (3)Associated Documents - December 18, 2014•Document ID: 10221077Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; BACK OVER PREVENTION; STRUCTURE; FUEL SYSTEM, DIESEL; SERVICE BRAKES, HYDRAULIC; FUEL SYSTEM, GASOLINE; POWER TRAIN; EXTERIOR LIGHTING
- Mfr Comm. #:
- 1800214REVC
- Date Added:
- September 26, 2022
- Manufacturer:
- RAM
SummaryFlash: 6.7L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM/PCM) with new software. Several software improvements are available for vehicles equipped with a Cummins 6.7L turbo Diesel.Prevent Or Reduce Malfunction Indicator Lamp (MIL) Illumination When No Defect is Present For The Following Diagnostic Trouble Codes (DTCs). These Faults Have Been Changed From A One Trip Fault To A Two Trip Fault: P0201 - P0206 - Fuel Injector X Circuit/Open Fault Codes. U110E - Lost Ambient Temperature Message. P049D - EGR Control Position Exceeding Learning Limit.Improvements To Prevent Or Reduce Malfunction Indicator Lamp (MIL) Illumination When No Defect Is Present For: U3017 - Control Module Timer/Clock Performance. P0087 - Fuel Rail Pressure Too Low. P0544 - Exhaust Gas Temperature Sensor Circuit - Sensor 1/1. P2281 - Air Leak Between MAF And Throttle Body. P0128 - Thermostat Rationality. In low ambient temperatures. U1421 - Implausible Ignition Key Off Time Received. P202E - Diesel Exhaust Fluid (DEF) Reductant Injector Performance. P20EE - SCR NOX Catalyst Efficiency Below Threshold - Bank 1. P2002 - Diesel Particulate Filter Efficiency Below Threshold. P0604 - Internal control Module RAM Error. This DTC may be caused by enabling the remote throttle feature via the EVIC, and it will be accompanied by a ?service electronic throttle control? message in the EVIC.Other Updates: Urea system calibration changes. Fuel Filter Minder Calibration Changes. Cruise control system improvements. Improvements in exhaust brake switch operation. Charging system improvements for dual alternator applications. Various wiTECH data and system test additions and improvements. OBD Template changes for P2453. Dual Fuel Tank component update. Inducement Timer Reset (Feature enable in wiTech). PTO Denied Status Message Update. PTO Horn Request sent to Body Control Unit (BCU.)
Associated Products (3)Associated Documents - December 18, 2014•Document ID: 10139907Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 18-002-14 REV. C
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFlash: 6.7L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM/PCM) with new software. Several software improvements are available for vehicles equipped with a Cummins 6.7L turbo Diesel.Prevent Or Reduce Malfunction Indicator Lamp (MIL) Illumination When No Defect is Present For The Following Diagnostic Trouble Codes (DTCs). These Faults Have Been Changed From A One Trip Fault To A Two Trip Fault: P0201 - P0206 - Fuel Injector X Circuit/Open Fault Codes. U110E - Lost Ambient Temperature Message. P049D - EGR Control Position Exceeding Learning Limit.Improvements To Prevent Or Reduce Malfunction Indicator Lamp (MIL) Illumination When No Defect Is Present For: U3017 - Control Module Timer/Clock Performance. P0087 - Fuel Rail Pressure Too Low. P0544 - Exhaust Gas Temperature Sensor Circuit - Sensor 1/1. P2281 - Air Leak Between MAF And Throttle Body. P0128 - Thermostat Rationality. In low ambient temperatures. U1421 - Implausible Ignition Key Off Time Received. P202E - Diesel Exhaust Fluid (DEF) Reductant Injector Performance. P20EE - SCR NOX Catalyst Efficiency Below Threshold - Bank 1. P2002 - Diesel Particulate Filter Efficiency Below Threshold. P0604 - Internal control Module RAM Error. This DTC may be caused by enabling the remote throttle feature via the EVIC, and it will be accompanied by a ?service electronic throttle control? message in the EVIC.Other Updates: Urea system calibration changes. Fuel Filter Minder Calibration Changes. Cruise control system improvements. Improvements in exhaust brake switch operation. Charging system improvements for dual alternator applications. Various wiTECH data and system test additions and improvements. OBD Template changes for P2453. Dual Fuel Tank component update. Inducement Timer Reset (Feature enable in wiTech). PTO Denied Status Message Update. PTO Horn Request sent to Body Control Unit (BCU.)
Associated Products (3)Associated Documents - December 18, 2014•Document ID: 10057223Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-002-14 REV.C
- Date Added:
- April 29, 2015
- Manufacturer:
- RAM
SummaryDODGE RAM: 2014 3500/4500 CAB CHASSIS THIS BULLETIN SPECIFIES THE REPROGRAMMING AND ERASING OF THE NEW ENGINE CONTROL MODULE SOFTWARE. *LJ
Associated Products (2)Associated Documents - December 15, 2014•Document ID: 10229900Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 0500614
- Date Added:
- January 17, 2023
- Manufacturer:
- DODGE
SummaryFront And/Or Rear Brake Noise (Squeal) This bulletin involves replacing the front and rear brake pads and rear rotors to correct a brake squeal condition. The customer may experience a squealing noise during braking coming from the front and/or rear the vehicle.
Associated Products (6)Associated Documents - December 15, 2014•Document ID: 10221068Service Bulletin/Repair InstructionsBACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 0500614
- Date Added:
- September 26, 2022
- Manufacturer:
- DODGE
SummaryFront And/Or Rear Brake Noise (Squeal) This bulletin involves replacing the front and rear brake pads and rear rotors to correct a brake squeal condition. The customer may experience a squealing noise during braking coming from the front and/or rear the vehicle.
Associated Products (6)Associated Documents - December 15, 2014•Document ID: 10139898Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 05-006-14
- Date Added:
- June 11, 2018
- Manufacturer:
- DODGE
SummaryFront And/Or Rear Brake Noise (Squeal) This bulletin involves replacing the front and rear brake pads and rear rotors to correct a brake squeal condition. The customer may experience a squealing noise during braking coming from the front and/or rear the vehicle.
Associated Products (6)Associated Documents - December 15, 2014•Document ID: 10061866Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 05-006-14
- Date Added:
- April 12, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (6)Associated Documents - December 12, 2014•Document ID: 10229897Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 1400114
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20°F or -7°C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
Associated Products (6)Associated Documents - December 12, 2014•Document ID: 10221065Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING; STRUCTURE
- Mfr Comm. #:
- 1400114REVB
- Date Added:
- September 26, 2022
- Manufacturer:
- RAM
SummaryFuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20°F or -7°C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
Associated Products (8)Associated Documents - December 12, 2014•Document ID: 10139895Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 14-001-14 REV. B
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20°F or -7°C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
Associated Products (7)Associated Documents - December 12, 2014•Document ID: 10062968Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER
- Mfr Comm. #:
- 14-001-14REV.B
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - December 9, 2014•Document ID: 10229890Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 0810814
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryRA2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud (Grand Cherokee only). U0208-00 - Loss Communication With Heated Seat Control Module (Cherokee only).Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10229888Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 0810914
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryRG2 Or RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud. The radio does not allow selection of the Polish language. The radio fan continually runs at high speed. Customer perception may be the radio fan is too loud.Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10221058Service Bulletin/Repair InstructionsSEATS; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; STEERING; WHEELS
- Mfr Comm. #:
- 0810814
- Date Added:
- September 26, 2022
- Manufacturer:
- JEEP
SummaryRA2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud (Grand Cherokee only). U0208-00 - Loss Communication With Heated Seat Control Module (Cherokee only).Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10221056Service Bulletin/Repair InstructionsSEATS; WHEELS; STEERING; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 0810914
- Date Added:
- September 26, 2022
- Manufacturer:
- RAM
SummaryRG2 Or RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud. The radio does not allow selection of the Polish language. The radio fan continually runs at high speed. Customer perception may be the radio fan is too loud.Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10139888Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-108-14
- Date Added:
- June 11, 2018
- Manufacturer:
- JEEP
SummaryRA2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud (Grand Cherokee only). U0208-00 - Loss Communication With Heated Seat Control Module (Cherokee only).Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (6)Associated Documents - December 9, 2014•Document ID: 10139886Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-109-14
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryRG2 Or RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud. The radio does not allow selection of the Polish language. The radio fan continually runs at high speed. Customer perception may be the radio fan is too loud.Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (6)Associated Documents - December 9, 2014•Document ID: 10062943Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-109-14
- Date Added:
- April 26, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10062942Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-108-14
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (7)Associated Documents