Nissan · Model Report
Nissan Maxima2003
Showing safety data for the 2003 model year only.
Nissan · Model Report
Showing safety data for the 2003 model year only.
Nissan North America, Inc. (Nissan) is recalling certain air bag inflator replacement service parts that may have been installed as part of a theft or collision repair. The parts include certain passenger-side air bag inflators designed to fit Infiniti 2002-2003 QX4, 2006-2010 M35 and M45; Nissan 2001-2003 Maxima, 2002-2006 Sentra, and both driver and passenger-side inflators designed to fit 2007-2012 Versa Sedan and Versa Hatchback vehicles. Please see Nissan's recall report for the specific part numbers. These replacement inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Nissan North America, Inc. (Nissan) is recalling certain 2001-2003 Maxima, 2002-2006 Sentra, 2002-2004 Pathfinder, 2007-2011 Versa Sedan and Versa Hatchback, 2001-2004 Infiniti I30 and I35, 2002-2003 Inifiniti QX4, 2003-2008 Infiniti FX35 and FX45 and 2006-2010 M35 and M45 vehicles. The vehicles are equipped with non-desiccated, frontal passenger air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Nissan North America, Inc. (Nissan) is recalling certain model year 2001-2003 Nissan Maxima, 2002-2004 Pathfinder, 2002-2006 Sentra, 2002-2003 Infiniti QX4 and I35, 2003 FX35 and FX45, and 2001 I30 vehicles. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
ON CERTAIN PASSENGER VEHICLES, THE CIRCUIT BOARD FOR THE CRANK POSITION SENSOR OR CAM POSITION SENSOR MAY HAVE AN IMPROPER SOLDER JOINT DUE TO SOLDER DEFORMATION CAUSED BY HEAT STRESS ACCELERATED BY THE EXISTENCE OF FLUX RESIDUE DURING THE SOLDERING PROCESS.
See attached document for complaint
No injuries · No fire · No crash
See attached document for complaint
No injuries · No fire · No crash
The contact owns a 2003 Nissan Maxima. The contact stated while driving at an undisclosed speed, the check engine warning light remained illuminated. Additionally, while driving approximately 20 MPH, the vehicle stalled. The vehicle was later towed to the residence. The cause of the failure was not yet determined. The local dealer and manufacturer were not contacted regarding the failure. The failure mileage was 225,000.
No injuries · No fire · No crash
The steering shimmies and pulls to the right. Power steering fluids are within there limits.
No injuries · No fire · No crash
Please fix your auto fill --- it just erased everything! Anyway, the engine cuts out while driving in traffic. The engine cuts out while waiting at a red light. The engine cuts out while turning. It's ALL random! The engine code shows P0340, Bank 1 and Bank2, and sometimes P0345. I have replaced the camshaft position sensors FIVE times!!!!! I have tried both Auto Zone and Hitachi, and neither of them solves the problem. I also paid to have the crankshaft sensor below replaced, and that didn't help. I am told that this problem has been posted online and it was recommended to only use OEM parts. This is very dangerous to lose power while in traffic, and then having to wait until the engine will restart, which eventually it does. This is an ongoing problem. PLEASE help!!!
No injuries · No fire · No crash