Nissan Altima Service Bulletins
1,075 manufacturer communications on file.
- September 5, 2014•Document ID: 10056378Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
- Mfr Comm. #:
- NTB-12-120-A
- Date Added:
- November 14, 2014
- Manufacturer:
- NISSAN
SummaryNISSAN: INFORMATION PROVIDED REGARDING REMOVAL OF THREE WAY CATALYST AND EXHAUST MANIFOLD SERVICE AND REPLACEMENT, IF NEEDED, OF UPPER/LOWER (HEAT SHIELD) EXHAUST MANIFOLD COVERS. MODEL 20007-10 SEDAN/COUPE, 2007-11 HYBRID. *PE
Associated Products (5)Associated Documents - September 5, 2014•Document ID: 10024143Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- NTB-08-001
- Date Added:
- March 13, 2008
- Manufacturer:
- NISSAN
SummaryNISSAN SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. VOLUNTARY SERVICE CAMPAIGN--2007-2008 ALTIMA SEDAN AND 2008 ALTIMA COUPE - EXHAUST HEAT SHIELD (2.5L). CSC WAS RECEIVED. *NJ UPDATED 4/8/08. *NJ UPDATED 11/14/14. *PE
Associated Products (2)Associated Documents - September 4, 2014•Document ID: 10192436Service Bulletin/Repair InstructionsEQUIPMENT; VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE
- Mfr Comm. #:
- NTB14016A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM A squeaking/ticking noise is coming from the Headliner between the Moonroof and B-pillar area shown in Figure A. * Can occur on rough roads or during conditions that cause body flex such as when entering or exiting a sloped driveway. ACTION Remove Moonroof brackets and apply UHMW tape, from Squeak and Rattle kit J-50397 (part # J-50397-15), to the bracket. Please see this bulletin for further details.
Associated Products (2)Associated Documents - August 29, 2014•Document ID: 10056181Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- NTB-14-084
- Date Added:
- September 29, 2014
- Manufacturer:
- NISSAN
SummaryNISSAN: REGARDING SOME VEHICLES USING TWO STAIN GAUGE OCCUPANT CLASSIFICATION SYSTEM (OCS) OPERATION, AND THE PRESSURES NECESSARY DUE TO DIFFERENT RESPONSE OF OCCUPANT SEATING POSTURE. MODEL 2013-2015 ALTIMA, SENTRA, PATHFINDER, LEAF, NV200, NV200 TAXI, ROGUE. *PE
Associated Products (9)Associated Documents - August 18, 2014•Document ID: 10192422Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- NTB14077
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION The purpose of this bulletin is to clarify language contained in the owner?s manual language for the APPLIED VEHICLES. For the APPLIED VEHICLES, the below language supersedes similar language in existing owner?s manuals. Future printings of owner?s manuals for the APPLIED VEHICLES will also contain the below language. For the APPLIED VEHICLES: NISSAN recommends using Genuine NISSAN NS-3 CVT Fluid ONLY in NISSAN CVTs. Do not mix with other fluids. Do not use Automatic transmission fluid (ATF) or Manual Transmission fluid in a NISSAN CVT, as it may damage the CVT. Damage caused by the use of fluids other than as recommended is not covered under NISSAN's New Vehicle Limited Warranty. Using fluids that are not equivalent to Genuine NISSAN NS-3 CVT Fluid may also damage the CVT. Damage caused by the use of fluids other than as recommended is not covered under NISSAN's New Vehicle Limited Warranty. See this bulletin for further detail.
Associated Products (19)2015 Nissan Altima2015 Nissan NV2002015 Nissan Pathfinder2015 Nissan Rogue2015 Nissan Sentra2015 Nissan Versa2015 Nissan Versa Note2014 Nissan Altima2014 Nissan NV2002014 Nissan Pathfinder2014 Nissan Rogue2014 Nissan Sentra2014 Nissan Versa2014 Nissan Versa Note2013 Nissan Altima2013 Nissan NV2002013 Nissan Pathfinder2013 Nissan Sentra2013 Nissan VersaAssociated Documents - August 18, 2014•Document ID: 10192421Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT
- Mfr Comm. #:
- NTB13077A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION Applied vehicles equipped with a CVT have a "cap" that appears to be a fluid level gauge. This "cap" will NOT have a gauge or "dipstick". This is normal. Do NOT replace the "cap" because it is thought to have a "dipstick". The fluid level is not checked from this location. The fluid level for applied vehicles is checked from the oil pan (refer to the appropriate section of the Electronic Service Manual [ESM]). Whenever checking, filling, or topping off a CVT's fluid level of an applied vehicle for any reason, use the procedure outlined in the appropriate section of the ESM. See this bulletin for further detail.
Associated Products (19)2017 Nissan Sentra2015 Nissan Altima2015 Nissan NV2002015 Nissan Pathfinder2015 Nissan Rogue2015 Nissan Versa2015 Nissan Versa Note2014 Nissan Altima2014 Nissan NV2002014 Nissan Pathfinder2014 Nissan Rogue2014 Nissan Sentra2014 Nissan Versa2014 Nissan Versa Note2013 Nissan Altima2013 Nissan Pathfinder2013 Nissan Sentra2013 Nissan Versa2012 Nissan VersaAssociated Documents - August 15, 2014•Document ID: 10052883Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- NTB-13-079
- Date Added:
- September 24, 2013
- Manufacturer:
- NISSAN
SummaryNISSAN: THE CVT FAIL-SAFE LOGIC HAS CAUSED A REDUCTION WITH THE VEHICLE'S MAXIMUM SPEED. *JS UPDATED 11/16/2013 *JS UPDATED 9/29/14. *PE
Associated Products (6)Associated Documents - June 24, 2014•Document ID: 10192394Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB10066A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION Related to communication codes U1000, U1001, U1002, U1010: - Always diagnose the communication codes first. - When a module reports a U1000 code, it is typically operating normally; however, there is a communication error external to that module on the CAN network. - U1000 indicates an error. V-CAN diagram or CAN Diag Support Monitor provides data to determine the location of the error. See this bulletin for more information.
Associated Products (156)2015 Nissan 370Z2015 Nissan Altima2015 Nissan GT-R2015 Nissan Leaf2015 Nissan Versa2015 Nissan Versa Note2014 Nissan 370Z2014 Nissan Altima2014 Nissan Armada2014 Nissan Cube2014 Nissan Frontier2014 Nissan GT-R2014 Nissan Juke2014 Nissan Leaf2014 Nissan Maxima2014 Nissan Murano2014 Nissan NV2014 Nissan NV2002014 Nissan Pathfinder2014 Nissan Quest+ 136 moreAssociated Documents - June 18, 2014•Document ID: 10044780Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE
- Mfr Comm. #:
- NTB-12-051
- Date Added:
- July 27, 2012
- Manufacturer:
- NISSAN
SummaryNISSAN: WITH REGARDS TO CERTAIN MODEL VEHICLES, NO DRIVABILITY CONCERNS WHEN MIL IS ON FOR MASS AIR FLOW SENSOR (MAF) STORED IN ECM. *PE UPDATED 07/22/2014 *JS
Associated Products (2)Associated Documents - June 6, 2014•Document ID: 10192383Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- NTB14053
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION As with other Nissan vehicles, the Altima is equipped with Hydraulic Electric Power Steering (H-EPS). This system uses an electric motor to drive a pump rather than relying on a conventional belt-driven pump. Some normal operational sound may be heard from the front of the vehicle generated by the H-EPS when the steering wheel is operated. Comparing the incident vehicle to a "known good vehicle" will help determine if there is louder than normal H-EPS related sound. If diagnosed as having louder than normal H-EPS sound, use this bulletin to assist in locating and repairing the cause. See this bulletin for further detail.
Associated Products (1)Associated Documents - June 6, 2014•Document ID: 10055906Service Bulletin/Repair InstructionsSTEERING:HYDRAULIC POWER ASSIST SYSTEM; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB-14-053
- Date Added:
- August 5, 2014
- Manufacturer:
- NISSAN
SummaryNISSAN: INFORMATION PROVIDED REGARDING THE SERVICE PROCEDURE FOR THE HYDRAULIC ELECTRIC POWER STEERING (H-EPS), LOUDER THAN NORMAL SOUND. MODEL 2014 ALTIMA. *PE
Associated Products (1)Associated Documents - May 30, 2014•Document ID: 10192378Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC; EQUIPMENT
- Mfr Comm. #:
- NTB12118A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM A squeal/squeak noise is coming from the rear brakes: - When the brakes are either hot (after 10-15 minutes of driving) or cold (after vehicle has not been driven for 2-3 hours), - while moving forward or in reverse, - at speeds less than 10 MPH, - while traveling straight, AND - with light to moderate brake application (pedal pressure). NOTE - These are the typical conditions in which to duplicate the rear brake squeal/squeak; however, these conditions are not intended to detail all of the possible conditions in which the noise may occur. When attempting to duplicate this noise it is important to have a second person safely standing outside of the vehicle to determine if the noise is coming from the front or rear brakes. ACTION Replace the rear brake pads and the rear brake hardware kit with the parts listed in the Parts Information section of this bulletin. - Refer to the Electronic Service Manual (ESM), section BR - Brake System, for removal and installation information. See this bulletin for further detail.
Associated Products (1)Associated Documents - May 30, 2014•Document ID: 10192377Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB14049
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM: The customer states the following: - While driving, the audio setting in the Vehicle Information Display (VID) is blank while displaying normally in the audio unit. - All other items in the VID display normally i.e. temperature, MPG, etc. - Items above and below the VID display normally i.e. DTE, gear selection, etc. - The issue occurs with the ignition ON or the engine running. - The audio setting normally displays in the combination meter with the audio system on. NOTE: With the ignition in the ACC position, the audio display will go off after approximately 5 seconds. This is normal. ACTION: Replace the combination meter assembly with the one listed in PARTS INFORMATION. NOTE: Do NOT replace the audio unit or any other related parts for this issue, if it should occur. See this bulletin for further detail.
Associated Products (1)Associated Documents - May 21, 2014•Document ID: 10192372Service Bulletin/Repair InstructionsSTEERING; ELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- NTB13017B
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM: The customer is experiencing a noise coming from the passenger side engine compartment and The source of the noise is confirmed to be the Hydraulic Electric Power Steering (H-EPS) and The noise is louder than the normal operational noise of the H-EPS. Notes: - Some operational noise from the front of the vehicle generated by the H-EPS is normal when the steering wheel is operated. - Comparing the incident vehicle to a "known good vehicle" will help determine if the H-EPS noise is louder than normal. ACTION: Refer to the Repair Flow Chart on page 2. See this bulletin for further detail.
Associated Products (2)Associated Documents - May 19, 2014•Document ID: 10192370Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HOOD; EQUIPMENT
- Mfr Comm. #:
- NTB13041A
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION - The Applied Vehicles are equipped with a hood ledge finisher on the passenger (RH) side only. - Do not submit a claim for a "missing" hood ledge finisher on driver's (LH) side. See this bulletin for further detail.
Associated Products (2)Associated Documents - May 6, 2014•Document ID: 10192361Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB14038
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION When registering the Intelligent Keys (I-Keys) to a vehicle for one of the following concerns: * After replacing the BCM. Or * When one of the I-Keys has been lost and needs to be replaced. Or * When additional I-Keys are being added to the vehicle. Always use the following steps to insure proper registration of the I-Keys: 1. First Initialize the BCM. 2. Register all of the vehicle?s ?previously registered? I-Keys to the vehicle first. And then 3. Register any new (additional) I-Keys only after all of the pre-existing I-Keys have been registered. 4. Confirm operations of all I-Keys. Please see this bulletiln for further details.
Associated Products (5)Associated Documents - April 29, 2014•Document ID: 10192354Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING
- Mfr Comm. #:
- NTB14032
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION Warranty claims coding for repairing wiring harnesses for all Nissan vehicles has changed. This bulletin gives an outline of the technician?s responsibilities in assisting the dealer?s claims administrator to properly code a harness repair. Failure to provide correct information may result in claims suspension or rejection. See this bulletin for further detail.
Associated Products (138)2017 Nissan 370Z2017 Nissan Altima2017 Nissan Armada2017 Nissan Frontier2017 Nissan GT-R2017 Nissan Juke2017 Nissan Leaf2017 Nissan Maxima2017 Nissan Murano2017 Nissan NV2002017 Nissan Pathfinder2017 Nissan Rogue2017 Nissan Sentra2017 Nissan Titan2017 Nissan Versa2016 Nissan 370Z2016 Nissan Altima2016 Nissan Frontier2016 Nissan GT-R2016 Nissan Juke+ 118 moreAssociated Documents - March 27, 2014•Document ID: 10192340Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB13004B
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummarySERVICE INFORMATION The base model of the 2013-2014 Altima 2.5 Sedan is not equipped with an engine cover. Base model 2013 Altima 2.5 Sedan vehicles built before the VINs and dates shown below are not equipped with exhaust finishers. 1N4AL3AP(*)DC 227196 // March 13, 2013 1N4AL3AP(*)DN 530748 // March 8, 2013 The base model can be identified by the model designation on the trunk lid. The trunk lid will not have any of the following: - S - SV - SL Do not attempt to install an engine cover or exhaust finishers* under warranty on the base model. Installation of these parts on this model is not covered under warranty. *If vehicle was built before VINs and dates shown above.
Associated Products (2)Associated Documents - March 5, 2014•Document ID: 10054095Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB-13-106
- Date Added:
- December 20, 2013
- Manufacturer:
- NISSAN
SummaryNISSAN: IGNITION MUST CYCLE TWO TIMES TO COMPLETE CONFIGURATION FOR NAVIGATION EQUIPPED VEHICLES AND IF CONFIGURATION NOT COMPLETED SOME SYMPTOMS MAY OCCUR (NO BACK UP CAMERA, NO VOLUME RESPONSE, EQUALIZER ADJUSTED SO BASS CONTROL IS AT MAXIMUM, NO STEERING WHEEL SWITCH RESPONSE). MODEL 2014 ALTIMA, ROGUE, FRONTIER, SENTRA, XTERRA. *PE UPDATED 02/26/2014 *JS UPDATED 4/22/14. *PE
Associated Products (5)Associated Documents - February 25, 2014•Document ID: 10192328Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- NTB14013
- Date Added:
- May 10, 2021
- Manufacturer:
- NISSAN
SummaryIF YOU CONFIRM: When slowly raising the engine RPM, a hissing, whining, and/or air leak type noise of an applied vehicle is heard coming from the driver side lower instrument panel area. - The noise is verified while the vehicle is parked and the transmission is in the Park (P) position. NOTE: A customer may state the noise can be duplicated during light to moderate acceleration in the 10 - 40 MPH range. ACTION: 1. Remove the ground wire connected between the transmission and driver side frame rail. 2. If the noise stops after repeating the procedure under IF YOU CONFIRM, replace the ground wire with the one listed in PARTS INFORMATION. See this bulletin for further detail.
Associated Products (2)Associated Documents