Mazda MX-30 Service Bulletins (2022)
198 manufacturer communications on file.
- April 28, 2023•Document ID: 10235579Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SA-015-23b
- Date Added:
- May 4, 2023
- Manufacturer:
- MAZDA
SummaryMazda Connected Services - Frequently Asked Questions (FQA)
Associated Products (16)Associated Documents - April 25, 2023•Document ID: 10235576Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT:ELECTRICAL:INFOTAINMENT; LATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- SA-009-23c
- Date Added:
- May 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following:1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.Engine Start / Stop,Door Lock / Unlock,Lights ON / OFF. 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
Associated Products (16)Associated Documents - April 21, 2023•Document ID: 10235700Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-025-23
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummaryWhen the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
Associated Products (10)Associated Documents - April 18, 2023•Document ID: 10235420Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: RADAR; EQUIPMENT
- Mfr Comm. #:
- 15-001-23
- Date Added:
- May 3, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit the warning messages Safety and Driver Support Systems Temporarily Disabled or Front Radar Obscured. Drive Safely displayed in the instrument cluster despite no dirt on the front radar sensor while driving in specific locations as follows:
Associated Products (3)Associated Documents - April 14, 2023•Document ID: 10235701Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-022-23
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about an intermittent Beep sound (popping sound) every 1-2 minutes while driving. This may be cause by a software error in the navigation SD card.
Associated Products (10)Associated Documents - April 4, 2023•Document ID: 10235705Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-018-23a
- Date Added:
- May 5, 2023
- Manufacturer:
- MAZDA
SummaryThis service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.
Associated Products (14)Associated Documents - April 3, 2023•Document ID: 10235415Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-007-23a
- Date Added:
- May 3, 2023
- Manufacturer:
- MAZDA
SummaryAt PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.
Associated Products (21)2024 Mazda CX-902023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-302023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda32021 Mazda Mazda6+ 1 moreAssociated Documents - March 28, 2023•Document ID: 10233685Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-018-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummaryThis service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.
Associated Products (12)Associated Documents - March 28, 2023•Document ID: 10233683Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SA-009-23b
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
Associated Products (14)Associated Documents - March 27, 2023•Document ID: 10233659Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 02-001-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain that oil leaks from the rear shock absorber. Due to the structure, a small amount of oil is leaked out, but there is no functional concern. However, this oil leak level is almost the same where shock absorber replacement is required. To eliminate this concern, the structure of the oil seal in the rear shock absorber has been modified.
Associated Products (1)Associated Documents - March 20, 2023•Document ID: 10233687Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSPC8
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySPECIAL SERVICE PROGRAM SSPC8 - 2023 CX-9, 2023 MAZDA3, 2022-2023 MX-30 - REMOTE TUNER CONCERN. Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2023 CX-9, 2023 Mazda3 and 2022-2023 MX-30 vehicles equipped with a Remote Tuner module. There are 16,405 U.S. vehicles in the United States affected by this SSP.Certain Remote Tuner modules were built with outdated software and therefore the power shutdown processing of the module may not be completed. In this condition, if the vehicle is left unused for a certain amount of time, the 12V battery may discharge and run out.
Associated Products (3)Associated Documents - March 17, 2023•Document ID: 10233569Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT
- Mfr Comm. #:
- 16-003-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.
Associated Products (9)Associated Documents - March 10, 2023•Document ID: 10233674Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- SA-015-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummaryMazda Connect Services - Frequently Asked Questions (FAQ)
Associated Products (14)Associated Documents - March 1, 2023•Document ID: 10233704Service Bulletin/Repair InstructionsVISIBILITY; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
- Mfr Comm. #:
- SA-012-23
- Date Added:
- April 4, 2023
- Manufacturer:
- MAZDA
SummarySome customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.
Associated Products (20)2023 Mazda CX-302023 Mazda CX-52023 Mazda CX-502023 Mazda CX-92023 Mazda Mazda32023 Mazda MX-52022 Mazda CX-302022 Mazda CX-52022 Mazda CX-92022 Mazda Mazda32022 Mazda MX-302022 Mazda MX-52021 Mazda CX-32021 Mazda CX-302021 Mazda CX-52021 Mazda CX-92021 Mazda Mazda22021 Mazda Mazda32021 Mazda Mazda62021 Mazda MX-5Associated Documents - February 24, 2023•Document ID: 10232298Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- 09-015-23
- Date Added:
- March 3, 2023
- Manufacturer:
- MAZDA
SummarySome customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process. The fan motor bearing may become worn out during use. To eliminate the noise, the production process at the supplier and the material has been modified.
Associated Products (3)Associated Documents - February 6, 2023•Document ID: 10232303Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EXTERIOR LIGHTING
- Mfr Comm. #:
- SA-009-23
- Date Added:
- March 3, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
Associated Products (14)Associated Documents - February 2, 2023•Document ID: 10232302Service Bulletin/Repair InstructionsWHEELS; STEERING
- Mfr Comm. #:
- SA-008-23
- Date Added:
- March 3, 2023
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
Associated Products (18)Associated Documents - February 1, 2023•Document ID: 10232300Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 07-002-23
- Date Added:
- March 3, 2023
- Manufacturer:
- MAZDA
SummarySome customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 °F (10°C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced since December 2021 at the supplier.
Associated Products (14)Associated Documents