Mazda CX-5 Service Bulletins (2013)
824 manufacturer communications on file.
- October 9, 2013•Document ID: 10097810Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 09-026-13-2833
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXHIBIT A NOISE FROM UNDER THE DRIVER SEAT WHILE DRIVING THE VEHICLE. THE NOISE MAY BE CAUSED BY VIBRATION WHEN THE BENT-UP END OF THE BALANCE SPRING (A) INTERFERES WITH THE SLIDER BUSHING (B). TO ELIMINATE THE NOISE, THE CLEARANCE BETWEEN THE BALANCE SPRING AND THE SLIDER BUSHING HAS BEEN INCREASED.
Associated Products (1)Associated Documents - October 9, 2013•Document ID: 10060518Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-026-13
- Date Added:
- March 31, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - October 9, 2013•Document ID: 10059737Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 06-002-13
- Date Added:
- March 16, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - October 7, 2013•Document ID: 10097813Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 01-023-13-2834
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXHIBIT AN ENGINE NO START IN AMBIENT TEMPERATURES BELOW -4 DEGREE FAHRENHEIT (-20 DEGREE CELSIUS) AFTER DRIVING FOR 10 - 20 MINUTES AND THEN PARKING THE CAR FOR ABOUT ONE HOUR. THIS MAY BE CAUSED BY THE CONTACT POINT OF THE MAIN RELAY FREEZING DUE TO MOISTURE INSIDE THE MAIN RELAY.
Associated Products (3)Associated Documents - October 7, 2013•Document ID: 10059450Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 01-023-13
- Date Added:
- March 16, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - October 4, 2013•Document ID: 10097814Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 09-025-13-2827A
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXHIBIT A CONDITION WHERE THE FRONT SEAT BACK TRIM IS COMING APART AT THE SEAMS. THIS CONDI-TION IS CAUSED BY INSUFFICIENT SEWING STRENGTH IN THE SEAMS. THE SEWING METHOD HAS BEEN IMPROVED TO ELIMINATE THIS CONCERN.
Associated Products (2)Associated Documents - October 4, 2013•Document ID: 10060515Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-025-13
- Date Added:
- March 31, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - September 30, 2013•Document ID: 10097741Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-025-13-2827
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXHIBIT A CONDITION WHERE THE FRONT SEAT BACK TRIM IS COMING APART AT THE SEAMS. THIS CONDI-TION IS CAUSED BY INSUFFICIENT SEWING STRENGTH IN THE SEAMS. THE SEWING METHOD HAS BEEN IMPROVED TO ELIMINATE THIS CONCERN.
Associated Products (2)Associated Documents - September 30, 2013•Document ID: 10060516Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-025-13
- Date Added:
- March 31, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - September 25, 2013•Document ID: 10097744Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 01-001-13-2746B
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXPERIENCE MIL ILLUMINATION WITH DTC P2610 (INSTRUMENT CLUSTER INTERNAL ENGINE OFF TIMER PERFORMANCE PROBLEM) STORED IN MEMORY AFTER ENGINE START AND ROOM FUSE 15A (A) REMOVED. NOTE:THE ODOMETER WILL DISPLAY F0-002 DURING TRANSPORT MODE (ROOM FUSE 15A REMOVED). TRANSPORT MODE IS CANCELED WHEN ROOM FUSE 15A IS INSTALLED OR THE VEHICLE ODOMETER IS MORE THAN 12.4MI (20KM).
Associated Products (4)Associated Documents - September 25, 2013•Document ID: 10059420Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 01-001-13
- Date Added:
- March 16, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - September 23, 2013•Document ID: 10061470Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- RF-13-09
- Date Added:
- April 12, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (5)Associated Documents - September 17, 2013•Document ID: 10097748Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 04-003-13-2823
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXPERIENCE THE TCS/DSC INDICATOR LIGHT AND THE TPMS WARNING LIGHT BOTH ON WITH DTC C0051:62 STORED IN MEMORY.DTC C0051:62 - THE DIFFERENCE BETWEEN THE INITIAL LEARNED VALUE OF THE STEERING ANGLE (AS CALCULATED BY EACH SENSOR) AND THE STEERING ANGLE (AS CALCULATED BY THE STEERING ANGLE SENSOR) WHILE DRIVING IN A STRAIGHT LINE, HAS EXCEEDED ITS ALLOWABLE TOLERANCE (OR THRESHOLD).NOTE:FOR VEHICLES EQUIPPED WITH THE SMART CITY BRAKE SYSTEM (SCBS), THE MASTER WARNING LIGHT ALSO COMES ON WITH THE MESSAGE "SCBS INSPECTION REQUIRED" IN THE DISPLAY.THE SYMPTOMS MAY OCCUR WHEN THE FOLLOWING CONDITIONS ARE MET: AFTER STARTING THE ENGINE, THE VEHICLE IS DRIVEN BACKWARDS WHILE THE STEERING WHEEL IS TURNED TO THE LEFT OR TO THE RIGHT. THE VEHICLE IS THEN DRIVEN FORWARD AND BEGINS ACCELERATING WHILE THE STEERING WHEEL IS STILL TURNED.TO ELIMINATE THIS CONCERN, THE DSC HU/CM SOFTWARE HAS BEEN CHANGED.
Associated Products (2)Associated Documents - September 17, 2013•Document ID: 10059489Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- 04-003-13
- Date Added:
- March 16, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - September 5, 2013•Document ID: 10097751Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-020-13-2808A
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME CUSTOMERS MAY COMPLAIN THAT THE DRIVER SIDE SEATBACK RECLINING POSITION SEEMS TO CHANGE BY ITSELF. THIS MAY BE CAUSED UNKNOWINGLY BY THE CUSTOMER WHEN THEY EXIT THE VEHICLE. THE CUSTOMERS LEG MAY BE CONTACTING THE RECLINER SWITCH KNOB AND CHANGING THE SEATBACK RECLINING POSITION.NOTE:THIS ISSUE DOES NOT INVOLVE ANY MOVEMENT OF THE SEATBACK WHILE THE VEHICLE IS BEING DRIVEN.
Associated Products (2)Associated Documents - September 5, 2013•Document ID: 10097750Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 02-008-13-2811
- Date Added:
- April 24, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXHIBIT A SQUEAKING OR KNOCKING NOISE FROM THE REAR OF THE VEHICLE WHEN PASSING OVER A BUMP. THIS IS CAUSED BY DUST ENTERING BETWEEN THE REAR STABILIZER BUSHING AND STABILIZER BAR, WHICH WEARS DOWN THE BUSHING. TO CORRECT THE PROBLEM, THE REAR STABILIZER BAR IS REPLACED WITH A MODIFIED ONE (WITH A SET OF STABI-LIZER BUSHINGS AND BRACKETS).
Associated Products (6)Associated Documents - September 5, 2013•Document ID: 10060497Service Bulletin/Repair InstructionsSEATS:FRONT ASSEMBLY:RECLINER
- Mfr Comm. #:
- 09-020-13
- Date Added:
- March 31, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - September 5, 2013•Document ID: 10059445Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 01-021-13
- Date Added:
- March 16, 2016
- Manufacturer:
- MAZDA
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (5)Associated Documents - August 22, 2013•Document ID: 10097722Service Bulletin/Repair InstructionsSTEERING: STEERING WHEEL/HANDLE BAR
- Mfr Comm. #:
- 02-004-13-2770B
- Date Added:
- April 21, 2017
- Manufacturer:
- MAZDA
SummarySOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3° EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD.
Associated Products (76)2014 Mazda CX-52014 Mazda Mazda62013 Mazda CX-52013 Mazda CX-72013 Mazda CX-92013 Mazda Mazda22013 Mazda Mazda32013 Mazda Mazda52013 Mazda Mazda62013 Mazda MX-52012 Mazda CX-72012 Mazda CX-92012 Mazda Mazda22012 Mazda Mazda32012 Mazda Mazda52012 Mazda Mazda62012 Mazda MX-52011 Mazda CX-72011 Mazda CX-92011 Mazda Mazda2+ 56 moreAssociated Documents - August 9, 2013•Document ID: 10097724Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 01-022-13-2820
- Date Added:
- April 21, 2017
- Manufacturer:
- MAZDA
SummarySOME VEHICLES MAY EXPERIENCE THE FOLLOWING SYMPTOMS AT AMBIENT TEMPERATURES BETWEEN APPROX. 14 TO 25 DEGREES F (-4 TO -10 DEGREES C) AFTER A COLD START:UNUSUALLY LONG CRANKING IS NEEDED TO START THE ENGINEENGINE IMMEDIATELY STALLS AFTER START UP; CAN BE RE-STARTED.ROUGH IDLEIF FUELS CONTAINING HEAVY COMPONENTS (I.E. SUMMER FUEL) IS USED DURING THE COLD SEASON, THE A/F RATIO MAY BECOME LEAN DUE TO LOW VAPORIZATION. THIS MAY CAUSE THE ENGINE TO MIS-FIRE. TO ELIMINATE THIS CONCERN, THE PCM CONTROL LOGIC HAS BEEN CHANGED.
Associated Products (2)Associated Documents