Mazda B-Series Service Bulletins (1996)

90 manufacturer communications on file.

• January 9, 2020•Document ID: 10170661

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM; EQUIPMENT

  Mfr Comm. #:

  09-003-20-3671

  Date Added:

  January 23, 2020

  Manufacturer:

  MAZDA

  Summary

  In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement.  Mazda vehicles are manufactured with tamper-proof speedometers.  When a speedometer is replaced, the new speedometer will read zero (0) miles.  This procedure is extremely important to accurately represent actual vehicle mileage.  Prior to speedometer removal, complete the information required on the “Speedometer Replacement Label”. Labels can only be ordered through Mazda eStore.  In an effort to achieve a higher level of Customer Experience and retain the value of Mazda’s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO’s services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

  Associated Products (197)

  2020 Mazda CX-32020 Mazda CX-302020 Mazda CX-52020 Mazda CX-92020 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-52019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda22019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda5+ 177 more
  Associated Documents

  • DownloadMC-10170661-0001.pdf↗
• March 20, 2019•Document ID: 10154879

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE; EQUIPMENT

  Mfr Comm. #:

  00-003-19-3583

  Date Added:

  March 21, 2019

  Manufacturer:

  MAZDA

  Summary

  In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.

  Associated Products (160)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 140 more
  Associated Documents

  • DownloadMC-10154879-0001.pdf↗
• January 14, 2019•Document ID: 10153339

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

  Mfr Comm. #:

  09-009-19-3566

  Date Added:

  February 19, 2019

  Manufacturer:

  MAZDA

  Summary

  In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

  Associated Products (168)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 148 more
  Associated Documents

  • DownloadMC-10153339-0001.pdf↗
• January 9, 2019•Document ID: 10153311

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING

  Mfr Comm. #:

  01-004-19-3558

  Date Added:

  February 19, 2019

  Manufacturer:

  MAZDA

  Summary

  On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system.When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur tooxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.

  Associated Products (143)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 123 more
  Associated Documents

  • DownloadMC-10153311-0001.pdf↗
• January 3, 2019•Document ID: 10153331

  Service Bulletin/Repair Instructions
  EQUIPMENT ADAPTIVE/MOBILITY

  Mfr Comm. #:

  09-002-19-3554

  Date Added:

  February 19, 2019

  Manufacturer:

  MAZDA

  Summary

  This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another.

  Associated Products (144)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 124 more
  Associated Documents

  • DownloadMC-10153331-0001.pdf↗
• January 2, 2019•Document ID: 10153309

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM

  Mfr Comm. #:

  01-002-19-3552

  Date Added:

  February 19, 2019

  Manufacturer:

  MAZDA

  Summary

  The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. 2. CCA (Cold Cranking Amps):CCA ratings are normally located on a sticker affixed to the top of the battery to indicate a battery's Cold Cranking Amps. CCA rated batteries are supplied with domestically produced vehicles. NOTE: If an incorrect CCA rating is entered into the Mazda GR8-1291, it will result in a false result and invalid Warranty Code from the tester. This will also result in unnecessary replacement of batteries.

  Associated Products (143)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 123 more
  Associated Documents

  • DownloadMC-10153309-0001.pdf↗
• January 2, 2019•Document ID: 10153308

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM

  Mfr Comm. #:

  01-001-19-3551

  Date Added:

  February 19, 2019

  Manufacturer:

  MAZDA

  Summary

  This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.

  Associated Products (144)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 124 more
  Associated Documents

  • DownloadMC-10153308-0001.pdf↗
• October 10, 2018•Document ID: 10148072

  Service Bulletin/Repair Instructions
  VEHICLE SPEED CONTROL; EQUIPMENT

  Mfr Comm. #:

  09-034-18-3430a

  Date Added:

  November 13, 2018

  Manufacturer:

  MAZDA

  Summary

  In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

  Associated Products (167)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 147 more
  Associated Documents

  • DownloadMC-10148072-0001.pdf↗
• October 10, 2018•Document ID: 10148068

  Service Bulletin/Repair Instructions
  EQUIPMENT; STRUCTURE

  Mfr Comm. #:

  09-014-18-3443a

  Date Added:

  November 13, 2018

  Manufacturer:

  MAZDA

  Summary

  When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).

  Associated Products (146)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 126 more
  Associated Documents

  • DownloadMC-10148068-0001.pdf↗
• October 10, 2018•Document ID: 10148003

  Service Bulletin/Repair Instructions
  SERVICE BRAKES, HYDRAULIC; EQUIPMENT

  Mfr Comm. #:

  00-003-18-3480a

  Date Added:

  November 13, 2018

  Manufacturer:

  MAZDA

  Summary

  Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit.

  Associated Products (144)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 124 more
  Associated Documents

  • DownloadMC-10148003-0001.pdf↗
• October 10, 2018•Document ID: 10148002

  Service Bulletin/Repair Instructions
  EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

  Mfr Comm. #:

  00-001-18-3446a

  Date Added:

  November 13, 2018

  Manufacturer:

  MAZDA

  Summary

  Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

  Associated Products (143)

  2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 123 more
  Associated Documents

  • DownloadMC-10148002-0001.pdf↗
• September 6, 2018•Document ID: 10145242

  Service Bulletin/Repair Instructions
  ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

  Mfr Comm. #:

  01-016-18-3522

  Date Added:

  October 9, 2018

  Manufacturer:

  MAZDA

  Summary

  On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system. When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur to oxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.

  Associated Products (137)

  2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 117 more
  Associated Documents

  • DownloadMC-10145242-0001.pdf↗
• August 31, 2018•Document ID: 10144333

  Service Bulletin/Repair Instructions
  VEHICLE SPEED CONTROL

  Mfr Comm. #:

  09-034-18-3430

  Date Added:

  September 10, 2018

  Manufacturer:

  MAZDA

  Summary

  In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

  Associated Products (161)

  2019 Mazda CX-32018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-5+ 141 more
  Associated Documents

  • DownloadMC-10144333-0001.pdf↗
• May 11, 2018•Document ID: 10142515

  Service Bulletin/Repair Instructions
  SERVICE BRAKES

  Mfr Comm. #:

  00-003-18-3480

  Date Added:

  July 2, 2018

  Manufacturer:

  MAZDA

  Summary

  Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claimsare subject to denial or debit.

  Associated Products (139)

  2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 119 more
  Associated Documents

  • DownloadMC-10142515-0001.pdf↗
• March 26, 2018•Document ID: 10134929

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM:12V/24V/48V BATTERY

  Mfr Comm. #:

  01-009-18-3452

  Date Added:

  April 23, 2018

  Manufacturer:

  MAZDA

  Summary

  The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.

  Associated Products (137)

  2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 117 more
  Associated Documents

  • DownloadMC-10134929-0001.pdf↗
• March 26, 2018•Document ID: 10134928

  Service Bulletin/Repair Instructions
  ELECTRICAL SYSTEM:12V/24V/48V BATTERY

  Mfr Comm. #:

  01-008-18-3451

  Date Added:

  April 23, 2018

  Manufacturer:

  MAZDA

  Summary

  This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.

  Associated Products (138)

  2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 118 more
  Associated Documents

  • DownloadMC-10134928-0001.pdf↗
• March 26, 2018•Document ID: 10134703

  Service Bulletin/Repair Instructions
  EQUIPMENT ADAPTIVE/MOBILITY

  Mfr Comm. #:

  09-019-18-3450

  Date Added:

  April 23, 2018

  Manufacturer:

  MAZDA

  Summary

  This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another. Use these points at your dealership to protect our mutual operations and to help ensure our customers' safety.

  Associated Products (138)

  2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 118 more
  Associated Documents

  • DownloadMC-10134703-0001.pdf↗
• March 22, 2018•Document ID: 10134702

  Service Bulletin/Repair Instructions
  STRUCTURE

  Mfr Comm. #:

  09-014-18-3443

  Date Added:

  April 23, 2018

  Manufacturer:

  MAZDA

  Summary

  When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).

  Associated Products (141)

  2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda52016 Mazda Mazda62016 Mazda MX-5+ 121 more
  Associated Documents

  • DownloadMC-10134702-0001.pdf↗
• August 7, 2017•Document ID: 10118467

  Service Bulletin/Repair Instructions
  EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

  Mfr Comm. #:

  09-035-17-3080

  Date Added:

  October 4, 2017

  Manufacturer:

  MAZDA

  Summary

  In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.

  Associated Products (161)

  2018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-9+ 141 more
  Associated Documents

  • DownloadMC-10118467-0001.pdf↗
• February 15, 2016•Document ID: 10213333

  Service Bulletin/Repair Instructions
  EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:12V/24V/48V BATTERY

  Mfr Comm. #:

  0100516

  Date Added:

  June 6, 2022

  Manufacturer:

  MAZDA

  Summary

  Battery test procedure requirements using the GR81291

  Associated Products (119)

  2016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda32016 Mazda Mazda62016 Mazda MX-52015 Mazda CX-52015 Mazda CX-92015 Mazda Mazda32015 Mazda Mazda52015 Mazda Mazda62015 Mazda MX-52014 Mazda CX-52014 Mazda CX-92014 Mazda Mazda22014 Mazda Mazda32014 Mazda Mazda52014 Mazda Mazda62014 Mazda MX-52013 Mazda CX-52013 Mazda CX-9+ 99 more
  Associated Documents

  • DownloadMC-10213333-0001.pdf↗