Lexus NX Service Bulletins
195 manufacturer communications on file.
- May 13, 2024•Document ID: 11005185Service CampaignUNKNOWN OR OTHER
- Mfr Comm. #:
- 23LJ01
- Date Added:
- July 23, 2024
- Manufacturer:
- LEXUS
SummarySecond Key Delivery Program Frequently Asked Questions
Associated Products (14)Associated Documents - May 13, 2024•Document ID: 11005184Service CampaignUNKNOWN OR OTHER
- Mfr Comm. #:
- 23LJ01
- Date Added:
- July 23, 2024
- Manufacturer:
- LEXUS
SummaryThe table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated over time as more details become available.
Associated Products (14)Associated Documents - April 24, 2024•Document ID: 11003652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- L-TT-0323-23 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryWhen setting up the Lexus Interface (21MM) user profile, if the QR code is not working please use the following recommendations. 1. Refer to the TAS 21MM Diagnostics Pre-Call Worksheet (PCW) on the TAS case creation page. The following steps will provide some answers for the PCW. 2. Start with the vehicle running outside for 5-10 minutes in an area with no overhead obstructions. a. Enter the radio Service Menu (diagnostic mode) using Techstream or GTS+, or the manual swiping method as outlined in the Repair Manual. b. Once the Service Menu is shown, the Function Check/Setting, and Product information buttons will be used. 3. Select the Product Information button to display radio and DCM registration details. 4. Accurate GNSS Date and Time is needed for the QR code to work. From the Service Menu select Function Check/Setting > System Sensors Check to display GNSS details.
Associated Products (15)Associated Documents - April 24, 2024•Document ID: 11003597Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- L-TT-0323-23 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryWhen setting up the Lexus Interface (21MM) user profile, if the QR code is not working please use the following recommendations. 1. Refer to the TAS 21MM Diagnostics Pre-Call Worksheet (PCW) on the TAS case creation page. The following steps will provide some answers for the PCW. 2. Start with the vehicle running outside for 5-10 minutes in an area with no overhead obstructions. a. Enter the radio Service Menu (diagnostic mode) using Techstream or GTS+, or the manual swiping method as outlined in the Repair Manual. b. Once the Service Menu is shown, the Function Check/Setting, and Product information buttons will be used. 3. Select the Product Information button to display radio and DCM registration details. 4. Accurate GNSS Date and Time is needed for the QR code to work. From the Service Menu select Function Check/Setting > System Sensors Check to display GNSS details.
Associated Products (15)Associated Documents - April 19, 2024•Document ID: 11003650Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0023-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryTo prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Associated Products (50)Associated Documents - April 19, 2024•Document ID: 11003648Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0024-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Associated Products (51)Associated Documents - April 19, 2024•Document ID: 11003643Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0022-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryAcid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003642Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0021-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryLexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003641Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0020-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryVehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003595Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0023-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryTo prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
Associated Products (50)Associated Documents - April 19, 2024•Document ID: 11003593Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0024-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
Associated Products (51)Associated Documents - April 19, 2024•Document ID: 11003588Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0022-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryAcid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003587Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0021-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryLexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
Associated Products (46)Associated Documents - April 19, 2024•Document ID: 11003586Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- L-SB-0020-24
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryVehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
Associated Products (46)Associated Documents - April 18, 2024•Document ID: 11003639Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- L-SB-0021-23 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummarySome 2022 – 2024 model year Lexus vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev1: •Applicability has been updated to include 2024 model year GX 550, LX 600, NX 250, NX 350, NX 350h, NX 450h+, RX 350, RX 350h, RX 450h+, RX 500h, RZ 300e, RZ 450e, TX 350, TX 500h, and TX 550h+ vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.
Associated Products (12)Associated Documents - April 18, 2024•Document ID: 11003584Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- L-SB-0021-23 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummarySome 2022 – 2024 model year Lexus vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev1: •Applicability has been updated to include 2024 model year GX 550, LX 600, NX 250, NX 350, NX 350h, NX 450h+, RX 350, RX 350h, RX 450h+, RX 500h, RZ 300e, RZ 450e, TX 350, TX 500h, and TX 550h+ vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.
Associated Products (12)Associated Documents - April 17, 2024•Document ID: 11003637Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- L-SB-0007-21 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummarySome 2015 – 2017 model year NX 200t, 2016 – 2017 model year GS 200t, IS 200t, and RC 200t, 2018 – 2019 model year GS 300, and 2018 – 2021 model year NX 300, and 2018 – 2024 model year IS 300 and RC 300 vehicles equipped with an 8AR-FTS engine may exhibit a MIL ON condition with one or more of the following Diagnotic Trouble Codes (DTCs): •Cylinder Misfire – P030000, P030027, P030085, P030100, P030200, P030300, P030400. •Air-Fuel Ratio Imbalance – P11EA00, P11EC00, P11ED00, P11EE00, P11EF00, P219A00, P219C00, P219D00, P219E00, P219F00. Some vehicles may also enter limp mode, and the Multi-Informational Display (MID) will display the following message: “reduced engine power – take vehicle to nearest dealer.” This may be caused by cylinder compression pressure drop due to improper exhaust valve sealing from worn valve guides. REVISION NOTICE April 17, 2024 Rev1: •Applicability has been updated to include 2021 – 2024 model year IS 300 and RC 300, and 2021 NX 300 vehicles. •The Introduction, Parts Information, and Repair Procedure sections have been updated.
Associated Products (5)Associated Documents - April 17, 2024•Document ID: 11003582Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- L-SB-0007-21 Rev1
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummarySome 2015 – 2017 model year NX 200t, 2016 – 2017 model year GS 200t, IS 200t, and RC 200t, 2018 – 2019 model year GS 300, and 2018 – 2021 model year NX 300, and 2018 – 2024 model year IS 300 and RC 300 vehicles equipped with an 8AR-FTS engine may exhibit a MIL ON condition with one or more of the following Diagnotic Trouble Codes (DTCs): •Cylinder Misfire – P030000, P030027, P030085, P030100, P030200, P030300, P030400. •Air-Fuel Ratio Imbalance – P11EA00, P11EC00, P11ED00, P11EE00, P11EF00, P219A00, P219C00, P219D00, P219E00, P219F00. Some vehicles may also enter limp mode, and the Multi-Informational Display (MID) will display the following message: “reduced engine power – take vehicle to nearest dealer.” This may be caused by cylinder compression pressure drop due to improper exhaust valve sealing from worn valve guides. REVISION NOTICE April 17, 2024 Rev1: •Applicability has been updated to include 2021 – 2024 model year IS 300 and RC 300, and 2021 NX 300 vehicles. •The Introduction, Parts Information, and Repair Procedure sections have been updated.
Associated Products (5)Associated Documents - April 12, 2024•Document ID: 11003630Service CampaignUNKNOWN OR OTHER
- Mfr Comm. #:
- 23LJ01 Eligibility
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated over time as more details become available.
Associated Products (15)Associated Documents - April 12, 2024•Document ID: 11003575Service CampaignUNKNOWN OR OTHER
- Mfr Comm. #:
- 23LJ01 Eligibility
- Date Added:
- July 6, 2024
- Manufacturer:
- LEXUS
SummaryThe table describes the phases currently planned for the Second Key Delivery Program and the estimated timing of announcement. This table will be updated over time as more details become available.
Associated Products (15)Associated Documents