Hyundai · Model Report
Showing safety data for the 2011 model year only.
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.
CURT MANUFACTURING IS RECALLING CERTAIN TOW PACKAGE WIRING HARNESSES, PART NUMBER 55538, THAT CONNECT TOW VEHICLE LIGHTING CIRCUITS TO TRAILER LIGHTING CIRCUITS SOLD FOR USE ON CERTAIN MODEL YEAR 2009 THROUGH 2011 HYUNDAI SANTA FE VEHICLES. THE UNITS ARE NOT WATER-TIGHT AND MOISTURE CAN SEEP INTO THE CONVERTER MODULE AND DEFEAT THE MODULE'S INTERNAL CIRCUIT PROTECTION.
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2011 SANTA FE VEHICLES MANUFACTURED FROM SEPTEMBER 28, 2010, THROUGH NOVEMBER 25, 2010. SOME OF THE REAR BRAKE CALIPERS MAY NOT HAVE BEEN PROPERLY MACHINED.
My 2011 Hyundai Santa Fe (approx. 153,000 miles) developed a new stalling and engine-dying-at-idle condition immediately following a knock sensor replacement performed by a Hyundai dealership. Prior to this repair, the vehicle ran normally with no stalling or idle issues. The vehicle was originally brought in for diagnosis related to code P1326, which is covered under Hyundai Service Campaign T6G (engine rod bearing / knock sensor campaign). The dealership replaced the knock sensor but subsequently claimed my vehicle's P1326 condition did not qualify under Campaign T6G. Immediately after the knock sensor replacement, the vehicle began stalling and completely shutting off at idle — a condition that did not exist before the dealer's service. I returned the vehicle to the dealership to address this new issue. The vehicle has now been at the dealership for over three (3) weeks with no diagnosis update, no repair timeline, and no communication from the service department. I am filing this complaint for two reasons: 1. Safety concern: An engine that stalls and dies at idle presents a serious risk of loss of vehicle control, particularly in traffic or at intersections. 2. Service Campaign T6G: I believe the underlying condition and the dealer-caused stalling issue are both connected to the knock sensor system covered by this campaign. I request that NHTSA review whether this vehicle qualifies under Campaign T6G and whether dealer-caused damage following campaign-related service should be addressed under the campaign or a related recall. The dealership's failure to communicate for 3+ weeks and their claim that my vehicle is not covered under Campaign T6G warrants regulatory review.
No injuries · No fire · No crash
The contact owns a 2011 Hyundai Santa Fe. The contact stated that while driving at an undisclosed speed, there was an abnormal banging sound coming from the rear of the vehicle. The vehicle was taken to an independent mechanic who diagnosed that the rear chassis was rusted. The vehicle was not repaired. The independent mechanic performed no repairs on the vehicle. The contact stated that while touching the metal parts the parts were disintegrating. The contact stated that the 4x4 failed to operate as needed. The contact stated that the abnormal sound was worsening. The manufacturer was not made aware of the failure. The failure mileage was approximately 118,000.
No injuries · No fire · No crash
CATASTROPHIC ENGINE FAILURE. With no prior indications, the engine seized while driving on side street at 25mph. Engine blew hole in block and dumped engine parts, including piston rod, piston and engine block remnants, and oil on street. Very dangerous as power steering stopped and was unable to turn. Very low miles, 40,680, with all maintenance performed by dealer. Filed a report with Hyundai USA, no action taken.
No injuries · No fire · No crash
The undercarriage is completed rusted and is not drivable, I had the treatment done by the dealer to have it coated to protect it from rust. well, its rusted.
No injuries · No fire · No crash
The contact owned a 2011 Hyundai Santa Fe. The contact stated while the contact's daughter was driving at an undisclosed speed, the contact noticed a burning odor and the vehicle stalled. The contact idled the vehicle to the shoulder of the road and exited the vehicle. The vehicle burst into flames after the occupants exited the vehicle. The contact's daughter and daughter's friend were occupants of the vehicle at the time of the failure. No injuries were sustained. The fire department arrived and extinguished the fire. A Police report was filed. The vehicle was towed to a local tow yard. The vehicle was condemned to total loss. The manufacturer was made aware of the failure. The failure mileage was approximately 280,000.