Ford Bronco Sport Service Bulletins (2023)
112 manufacturer communications on file.
- March 1, 2024•Document ID: 10251934Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 52314
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummaryDuring service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
Associated Products (67)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford E-3502024 Ford E-4502024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Ford Transit2024 Lincoln Aviator2024 Lincoln Corsair2024 Lincoln Nautilus2024 Lincoln Navigator2023 Ford Bronco2023 Ford Bronco Sport2023 Ford E-3502023 Ford E-450+ 47 moreAssociated Documents - February 29, 2024•Document ID: 10250852Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 52307
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPassî/LincolnWayî app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep due to one of these conditions, follow normal Workshop Manual (WSM) Section 414-01 procedure to correct the concern. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (30)2023 Ford Bronco Sport2023 Ford Explorer2023 Ford Maverick2023 Ford Mustang2023 Ford Ranger2023 Ford Transit Connect2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Ecosport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Ecosport+ 10 moreAssociated Documents - October 27, 2023•Document ID: 10244798Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- TSB 23-2335
- Date Added:
- November 3, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco Sport vehicles equipped with a 1.5L engine built on or before 30-Nov-2022, 2021-2023 Bronco Sport vehicles equipped with a 2.0L engine built on or before 28-Feb-2022 or 2020-2022 Escape/Corsair non-plug in hybrid electric vehicle (PHEV) vehicles built on or before 30-Apr-2022 may exhibit a chatter/shudder during low speed turning events. This may be due to contamination of the rear drive unit (RDU) fluid through the RDU vent hose. To correct the condition, follow the Service Procedure to replace the RDU vent hose.
Associated Products (3)Associated Documents - October 19, 2023•Document ID: 10244854Service Bulletin/Repair InstructionsAIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE:SOFTWARE; ELECTRICAL SYSTEM; AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE
- Mfr Comm. #:
- SSM 51998
- Date Added:
- November 3, 2023
- Manufacturer:
- LINCOLN
SummarySome 2023 Escape/Corsair vehicles built on 6-Apr-2023 and through 11-May-2023 and 2023 Bronco Sport/Maverick vehicles built on 30-Jan-2023 and through 6-Jun-2023 may exhibit an illuminated air bag warning indicator with DTC B0082:1A stored in the restraints control module (RCM). This may be due to an issue with the passenger seatbelt retractor at connector C303B. If a connection issue is found, replace the passenger front seatbelt retractor and pretensioner assembly before attempting a wiring repair. This issue does not affect the proper operation of the air bags, retractor and pretensioner. Refer to the Workshop Manual (WSM), Section 501-20A Seatbelt Systems > Removal and Installation. For claiming, use causal part 78611B08 and applicable labor times in Section 12 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (4)Associated Documents - October 10, 2023•Document ID: 10244711Service Bulletin/Repair InstructionsEQUIPMENT; SERVICE BRAKES, AIR:DISC:CALIPER; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:BEARINGS/BUSHINGS
- Mfr Comm. #:
- TSB 23-2308
- Date Added:
- November 2, 2023
- Manufacturer:
- FORD
SummarySome 2020-2023 Escape and 2021-2023 Bronco Sport vehicles may exhibit a moan noise when the vehicle is driven in reverse (R) in cold weather and/or high humidity. This may be due to the suspension sensitivity of the vehicle. To correct this condition, follow the Service Procedure to replace the standard and reinforced rear caliper bushings and apply Kluberpaste to the machined surfaces of the brake caliper and caliper support bracket.
Associated Products (6)Associated Documents - October 5, 2023•Document ID: 10244707Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; ELECTRICAL SYSTEM:SOFTWARE; UNKNOWN OR OTHER; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- TSB 23-2307
- Date Added:
- November 2, 2023
- Manufacturer:
- FORD
SummarySome 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the SYNC module (APIM) software.
Associated Products (25)2023 Ford Bronco Sport2023 Ford Explorer2023 Ford Maverick2023 Ford Mustang2023 Ford Ranger2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Ecosport2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford Mustang+ 5 moreAssociated Documents - September 28, 2023•Document ID: 10243653Service Bulletin/Repair InstructionsEQUIPMENT; SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR
- Mfr Comm. #:
- SSM 51948
- Date Added:
- October 6, 2023
- Manufacturer:
- LINCOLN
SummarySome 2023 Escape, Corsair, Bronco Sport and Maverick vehicles built on 01-May-2023 and through 22-Sep-2023 may exhibit a squeal and/or grinding noise and/or vibration from the front brakes while braking. This may be due to excessive wheel hub lateral runout. To correct this condition, remove the front brake disc(s) of the affected wheel(s). Refer to the Workshop Manual (WSM), Section, 206-03. Clean the raised ring-like surface of the front wheel hub near the wheel studs. Using a dial indicator, slowly rotate the wheel hub and measure the runout on the ring-like surface. If the total runout exceeds 0.001 inch (0.03mm), replace the wheel hub. Refer to the WSM, Section 204-01. Document the measured run out in the warranty claim. For claiming use the causal part number 1104 and applicable labor operations in Section 01 of the Service Labor Time Standards (SLTS)
Associated Products (4)Associated Documents - September 26, 2023•Document ID: 10243474Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HATCHBACK/LIFTGATE; EQUIPMENT
- Mfr Comm. #:
- TSB 23-2298
- Date Added:
- October 3, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco Sport vehicles equipped with a 1.5L engine built on 24-Jul-2021 and through 31-Aug-2023 may exhibit a hissing noise from rear liftgate area when driving straight between 35-50 MPH (56 80 Km/h). This may be due to the absence of the rear floor insulator located in the spare tire compartment. To correct this condition, follow the Service Procedure to install a rear floor insulator in the spare tire compartment.
Associated Products (3)Associated Documents - September 22, 2023•Document ID: 10243611Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL
- Mfr Comm. #:
- SSM 51944
- Date Added:
- October 5, 2023
- Manufacturer:
- FORD
Summary2022-2023 Escape and Bronco Sport vehicles equipped with 1.5L engines should add local fuel once the vehicle arrive to the dealership to reduce the risk of driving performance issues such as: rough operation, idle quality, engine misfires, lack or loss of engine power. These conditions may occur due to different fuel specifications between manufacturing plant and final market. Make sure that the vehicles in stock have local fuel added.
Associated Products (4)Associated Documents - August 31, 2023•Document ID: 10241965Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 23G01
- Date Added:
- September 7, 2023
- Manufacturer:
- FORD
SummaryApplication Performance Upgrade 23G01 - Certain 2023 Model Year Bronco Sport VehiclesMissing Floor Mats
Associated Products (1)Associated Documents - August 30, 2023•Document ID: 10241545Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSB 23-2274
- Date Added:
- September 1, 2023
- Manufacturer:
- FORD
SummarySome 2022-2023 Bronco Sport/Escape vehicles equipped with a 1.5L engine and 2022-2023 Corsair vehicles equipped with a 2.5L engine, built on 01-Sep-2022 and through 06-Apr-2023, may exhibit a low coolant level with engine oil in the coolant and/or coolant in the engine oil. This may be caused by an internal oil cooler leak. To correct this condition, follow the Service Procedure to test and replace the oil cooler.
Associated Products (6)Associated Documents - August 23, 2023•Document ID: 10241544Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- TSB 23-2267
- Date Added:
- September 1, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco Sport vehicles built on or before 01-Nov-2022 equipped with light emitting diode (LED) control module (A2C7636130500 printed onto the module label) may exhibit a condition where the daytime running lamps (DRLs) stay on for up to 10 minutes after the vehicle is turned off and/or daytime running lamps momentarily dim to park intensity when the turn signal lamp is cancelled before returning to full DRL intensity. This may be due to the software in the LED control module. To correct this condition, follow the Service Procedure to replace both LED control modules and update the configuration of the body control module (BCM).
Associated Products (3)Associated Documents - August 21, 2023•Document ID: 10241597Service Bulletin/Repair InstructionsEQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
- Mfr Comm. #:
- SSM 51874
- Date Added:
- September 2, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco Sport and 2020-2023 Escape vehicles may exhibit a rattle or flapping noise coming from the rear air extractors while driving. This may be due to the normal operation of the rear air extractors. To determine if this is a normal condition, perform a road test at 40 mph (65 km/h) or above. Inspect if the noise is coming from the rear extractors. During the road test alternate air conditioning (A/C) between fresh mode and air re-circulation mode. If the noise is eliminated when the A/C is in fresh mode, this is considered a normal characteristic of the vehicle and no repairs should be performed.
Associated Products (6)Associated Documents - August 16, 2023•Document ID: 10241542Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSB 23-2259
- Date Added:
- September 1, 2023
- Manufacturer:
- FORD
SummarySome 2020-2022 Escape built and 2021-2023 Bronco Sport vehicles, built on or before 28-Sep-2022, equipped with a 1.5L Ecoboost engine and a 8F35 transmission may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0420 stored in the powertrain control module (PCM). This may be due to the catalytic converter. To correct this condition, follow the Service Procedure to replace the catalytic converter.
Associated Products (5)Associated Documents - August 2, 2023•Document ID: 10241627Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 51838
- Date Added:
- September 4, 2023
- Manufacturer:
- LINCOLN
SummaryIn various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
Associated Products (44)2023 Ford Bronco2023 Ford Bronco Sport2023 Ford Edge2023 Ford Escape2023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford Maverick2023 Ford Mustang2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Corsair2023 Lincoln Nautilus2023 Lincoln Navigator2022 Ford Bronco2022 Ford Bronco Sport2022 Ford Edge2022 Ford Escape2022 Ford Expedition+ 24 moreAssociated Documents - August 1, 2023•Document ID: 10240577Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 51823
- Date Added:
- August 11, 2023
- Manufacturer:
- FORD
SummarySome 2019-2023 Edge/Nautilus, 2020-2023 Escape/Corsair, 2021-2023 Bronco Sport, 2022-2023 Maverick vehicles equipped with all wheel drive (AWD) may exhibit chatter/shudder during low speed turning events. This may be due to fluid contamination in the rear drive unit (RDU). Drain and refill the RDU, refer to Workshop Manual Section (WSM) 205-02. Drive for 5 miles (8 km) in stop and go conditions with right and left turns and re-evaluate. If the issue is still present, continue with normal WSM diagnostics. For claiming, use base (4000) causal part.
Associated Products (17)2023 Ford Bronco Sport2023 Ford Edge2023 Ford Escape2023 Ford Maverick2023 Lincoln Corsair2023 Lincoln Nautilus2022 Ford Bronco Sport2022 Ford Edge2022 Ford Escape2022 Ford Maverick2022 Lincoln Corsair2022 Lincoln Nautilus2021 Ford Bronco Sport2021 Ford Edge2021 Ford Escape2021 Lincoln Corsair2021 Lincoln NautilusAssociated Documents - July 21, 2023•Document ID: 10239627Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HATCHBACK/LIFTGATE
- Mfr Comm. #:
- SSM 51808
- Date Added:
- July 26, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco Sport vehicles equipped with a 1.5L engine and active torque coupling differential may exhibit a hissing noise from rear liftgate area when driving between 35 to 50 MPH (56-80 Km/h). This condition could be eliminated when the vehicle is driven in slippery mode. This condition does not affect the vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform the customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in September 2023. The replacement of the rear drive unit (RDU) is not recommended for this condition. Monitor OASIS for additional information and schedule a service appointment for customers once the repair becomes available.
Associated Products (3)Associated Documents - July 19, 2023•Document ID: 10239624Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51800
- Date Added:
- July 25, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco Sport vehicles equipped with a 1.5L EcoBoost engine may require removal of the accessory drive belt, such as during the coolant pump removal and installation procedure. The accessory drive belt removal and installation procedure in the Workshop Manual (WSM), Section 303-05A, has been updated to eliminate the requirement to remove the fender splash shield and replace the front fender molding and rocker panel molding.
Associated Products (3)Associated Documents - July 19, 2023•Document ID: 10239623Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51799
- Date Added:
- July 25, 2023
- Manufacturer:
- FORD
SummarySome 2020-2023 Escape and 2021-2023 Bronco Sport vehicles equipped with the 1.5L engine may exhibit a lugging vibration and/or boom noise while driving in gears 5-8 at approximately 1500 engine revolutions per minute (RPM). This may be felt more when the engine is under a light to moderate load. A vibration and/or boom noise could be generated from the firing frequency of the 3 cylinders or when cylinder deactivation occurs and the engine is running on 2 cylinders. This condition is more noticeable when the vehicle is driven in ECO mode. This mode was designed to deliver maximum fuel efficiency and increase the driving range.
Associated Products (6)Associated Documents - June 16, 2023•Document ID: 10237977Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 51725
- Date Added:
- June 21, 2023
- Manufacturer:
- FORD
SummarySome 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass®/LincolnWay® app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (29)2023 Ford Bronco Sport2023 Ford Explorer2023 Ford Maverick2023 Ford Ranger2023 Ford Transit Connect2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Ecosport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Ecosport2021 Ford Escape+ 9 moreAssociated Documents