Dodge Ram Service Bulletins
1,118 manufacturer communications on file.
- November 30, 2012•Document ID: 10216349Service Bulletin/Repair InstructionsPOWER TRAIN; AIR BAGS; PARKING BRAKE; SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY
- Mfr Comm. #:
- M3411302012
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryAdvanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.
Associated Products (4)Associated Documents - November 30, 2012•Document ID: 10136472Service Bulletin/Repair InstructionsSUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY; EQUIPMENT:MECHANICAL
- Mfr Comm. #:
- M3411302012
- Date Added:
- May 14, 2018
- Manufacturer:
- RAM
SummaryAdvanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.
Associated Products (4)Associated Documents - November 30, 2012•Document ID: 10128934Service Bulletin/Repair InstructionsPOWER TRAIN:AXLE ASSEMBLY
- Mfr Comm. #:
- M3411302012
- Date Added:
- February 21, 2018
- Manufacturer:
- DODGE
SummaryAdvanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.
Associated Products (4)Associated Documents - November 29, 2012•Document ID: 10216348Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; FUEL SYSTEM, OTHER:FUEL FILTER
- Mfr Comm. #:
- 14-005-12
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryHeavy Duty Filtration MOPAR Retrofit or Add On Parts Available
Associated Products (16)Associated Documents - November 29, 2012•Document ID: 10136471Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, OTHER:FUEL FILTER
- Mfr Comm. #:
- 14-005-12
- Date Added:
- May 14, 2018
- Manufacturer:
- RAM
SummaryHeavy Duty Filtration MOPAR Retrofit or Add On Parts Available
Associated Products (11)Associated Documents - November 29, 2012•Document ID: 10128933Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 14-005-12
- Date Added:
- February 21, 2018
- Manufacturer:
- DODGE
SummaryHeavy Duty Filtration MOPAR Retrofit or Add On Parts Available
Associated Products (14)Associated Documents - November 21, 2012•Document ID: 10216339Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
- Mfr Comm. #:
- 18-012-12 REV. A
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryFlash: Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software. Pickup trucks equipped with a 6.7L Cummins diesel have software improvements/enhancements available for the following DTC's: P049D - EGR CONTROL POSITION EXCEEDED LEARNING LIMIT P0101 - MASS AIR FLOW SENSOR "A" CIRCUIT PERFORMANCE P0191 - FUEL RAIL PRESSURE SENSOR CIRCUIT PERFORMANCE P0471 - EXHAUST PRESSURE SENSOR 1 PERFORMANCE (for cold climate / icing concerns) P1451 - DIESEL PARTICULATE FILTER SYSTEM PERFORMANCE P2000 - NOx ABSORBER EFFICIENCY BELOW THRESHOLD P2002 - DIESEL PARTICULATE FILTER EFFICIENCY BELOW THRESHOLD (for high altitude failures) P2195 - O2 SENSOR 1/1 OUT OF RANGE HIGH P2196 - O2 SENSOR 1/1 OUT OF RANGE LOW P2262 -TURBOCHARGER BOOST PRESSURE NOT DETECTED - MECHANICAL P2270 - O2 SENSOR 1/2 OUT OF RANGE HIGH P2271 - O2 SENSOR 1/2 OUT OF RANGE LOW P241A - O2 SENSOR 1/1 AND 1/2 OXYGEN CONCENTRATION MISMATCH P245B - EGR COOLER BYPASS STATUS LINE INTERMITTENT P2453 - DIESEL PARTICULATE FILTER PRESSURE SENSOR A CIRCUIT PERFORMANCE P2457 - EXHAUST GAS RECIRCULATION COOLING SYSTEM PERFORMANCE P2609 - INTAKE AIR HEATER SYSTEM PERFORMANCEVehicles flashed to address the above codes should be driven and repair validated. If code(s) return, follow diagnostic procedures available in DealerCONNECT/TechCONNECT.Improvements other than DTC robustness or enhancements: Add EMP sensor value on WiTech Improve cruise control functionality Display correct EGR position on WiTech Display correct Crankcase Pressure on WiTech Display Correct alternator voltage in WiTech Corrected CAC Outlet temperature voltage reading Correct for OBD II Readiness for frequent regeneration monitor Improve EVIC message regarding idle shut down (Informs driver of automatic shutdown due to excessive idle time) WiTech turbo hysterisis test revision. ScanTool may report a code as stored, even though the fault has been cl
Associated Products (1)Associated Documents - November 21, 2012•Document ID: 10216338Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; PARKING BRAKE; SUSPENSION
- Mfr Comm. #:
- 08-053-12
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryFlash: RHR, RHW Or RHP Radio Software Enhancements This bulletin involves upgrading the software on the RHR, RHW or RHP Radio. The customer may experience one or more of the following conditions. Erratic alternate frequency switching (International only). Bluetooth phone muting during European traffic announcement (International only). Lost channel presets, home addresses, address book entries & Travel Link favorites. Not able to change default country and state then route. Unable to load .jpeg files onto hard drive to display on touch screen. Vehicle with Start/Stop feature, the screen will go black when the engine turns off at a stop. (International only). Incomplete Travel Link temperature displayed when the temperature is over 100F. Example, if the temperature is 107F the screen will display 07. (Domestic U.S. only). Cancel key inoperative after pressing the international button. iPhone4 dial not possible after second call. Missing Travel Link buttons from SAT menu (Domestic U.S. only). Devices button disabled in VES menu. Unable to route to a recent route after a map update. Remove Travel Link disclaimer popup (Domestic U.S. only). Duplicate phone numbers in popup after pressing the international button. During active call and on hold, DIAL button should be displayed (not ?TONE? button). International button not visible. Point of interest (POI) Search enhancements. When video in remote DVD player is stopped devices button wrongly labeled as DVD. Access Travel Link immediately after radio no update when staying on TL screen. iPod, track selection enhancements.
Associated Products (27)2013 Chrysler 2002013 Dodge Challenger2013 Dodge Durango2013 Dodge Grand Caravan2013 Jeep Grand Cherokee2013 Jeep Wrangler2012 Chrysler 2002012 Dodge Caliber2012 Dodge Challenger2012 Dodge Durango2012 Dodge Grand Caravan2012 Dodge Ram2012 Jeep Compass2012 Jeep Grand Cherokee2012 Jeep Liberty2012 Jeep Wrangler2011 Chrysler 2002011 Dodge Caliber2011 Dodge Challenger2011 Dodge Durango+ 7 moreAssociated Documents - November 21, 2012•Document ID: 10136462Service Bulletin/Repair InstructionsFUEL SYSTEM, DIESEL; SERVICE BRAKES, HYDRAULIC; FUEL SYSTEM, GASOLINE; POWER TRAIN; ELECTRICAL SYSTEM; AIR BAGS; BACK OVER PREVENTION
- Mfr Comm. #:
- 18-012-12 REV. A
- Date Added:
- May 14, 2018
- Manufacturer:
- DODGE
SummaryFlash: Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software. Pickup trucks equipped with a 6.7L Cummins diesel have software improvements/enhancements available for the following DTC's: P049D - EGR CONTROL POSITION EXCEEDED LEARNING LIMIT P0101 - MASS AIR FLOW SENSOR "A" CIRCUIT PERFORMANCE P0191 - FUEL RAIL PRESSURE SENSOR CIRCUIT PERFORMANCE P0471 - EXHAUST PRESSURE SENSOR 1 PERFORMANCE (for cold climate / icing concerns) P1451 - DIESEL PARTICULATE FILTER SYSTEM PERFORMANCE P2000 - NOx ABSORBER EFFICIENCY BELOW THRESHOLD P2002 - DIESEL PARTICULATE FILTER EFFICIENCY BELOW THRESHOLD (for high altitude failures) P2195 - O2 SENSOR 1/1 OUT OF RANGE HIGH P2196 - O2 SENSOR 1/1 OUT OF RANGE LOW P2262 - TURBOCHARGER BOOST PRESSURE NOT DETECTED - MECHANICAL P2270 - O2 SENSOR 1/2 OUT OF RANGE HIGH P2271 - O2 SENSOR 1/2 OUT OF RANGE LOW P241A - O2 SENSOR 1/1 AND 1/2 OXYGEN CONCENTRATION MISMATCH P245B - EGR COOLER BYPASS STATUS LINE INTERMITTENT P2453 - DIESEL PARTICULATE FILTER PRESSURE SENSOR A CIRCUIT PERFORMANCE P2457 - EXHAUST GAS RECIRCULATION COOLING SYSTEM PERFORMANCE P2609 - INTAKE AIR HEATER SYSTEM PERFORMANCEVehicles flashed to address the above codes should be driven and repair validated. If code(s) return, follow diagnostic procedures available in DealerCONNECT/TechCONNECT.Improvements other than DTC robustness or enhancements: Add EMP sensor value on WiTech Improve cruise control functionality Display correct EGR position on WiTech Display correct Crankcase Pressure on WiTech Display Correct alternator voltage in WiTech Corrected CAC Outlet temperature voltage reading Correct for OBD II Readiness for frequent regeneration monitor Improve EVIC message regarding idle shut down (Informs driver of automatic shutdown due to excessive idle time) WiTech turbo hysterisis test revision.
Associated Products (1)Associated Documents - November 21, 2012•Document ID: 10136461Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- 08-053-12
- Date Added:
- May 14, 2018
- Manufacturer:
- DODGE
SummaryFlash: RHR, RHW Or RHP Radio Software Enhancements This bulletin involves upgrading the software on the RHR, RHW or RHP Radio. The customer may experience one or more of the following conditions. Erratic alternate frequency switching (International only). Bluetooth phone muting during European traffic announcement (International only). Lost channel presets, home addresses, address book entries & Travel Link favorites. Not able to change default country and state then route. Unable to load .jpeg files onto hard drive to display on touch screen. Vehicle with Start/Stop feature, the screen will go black when the engine turns off at a stop. (International only). Incomplete Travel Link temperature displayed when the temperature is over 100F. Example, if the temperature is 107F the screen will display 07. (Domestic U.S. only). Cancel key inoperative after pressing the international button. iPhone4 dial not possible after second call. Missing Travel Link buttons from SAT menu (Domestic U.S. only). Devices button disabled in VES menu. Unable to route to a recent route after a map update. Remove Travel Link disclaimer popup (Domestic U.S. only). Duplicate phone numbers in popup after pressing the international button. During active call and on hold, DIAL button should be displayed (not ?TONE? button). International button not visible. Point of interest (POI) Search enhancements. When video in remote DVD player is stopped devices button wrongly labeled as DVD. Access Travel Link immediately after radio no update when staying on TL screen. iPod, track selection enhancements.
Associated Products (31)2013 Chrysler 2002013 Chrysler Town and Country2013 Dodge Avenger2013 Dodge Challenger2013 Dodge Durango2013 Jeep Grand Cherokee2013 Jeep Wrangler2012 Chrysler 2002012 Chrysler Town and Country2012 Dodge Avenger2012 Dodge Caliber2012 Dodge Challenger2012 Dodge Durango2012 Dodge Ram2012 Jeep Compass2012 Jeep Grand Cherokee2012 Jeep Liberty2012 Jeep Patriot2012 Jeep Wrangler2011 Chrysler 200+ 11 moreAssociated Documents - November 21, 2012•Document ID: 10128924Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN; FUEL SYSTEM, GASOLINE; SERVICE BRAKES, HYDRAULIC; AIR BAGS; FUEL SYSTEM, DIESEL; BACK OVER PREVENTION
- Mfr Comm. #:
- 18-012-12 REV. A
- Date Added:
- February 21, 2018
- Manufacturer:
- DODGE
SummaryFlash: Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software. Pickup trucks equipped with a 6.7L Cummins diesel have software improvements/enhancements available for the following DTC's: P049D - EGR CONTROL POSITION EXCEEDED LEARNING LIMITP0101 - MASS AIR FLOW SENSOR "A" CIRCUIT PERFORMANCE P0191 - FUEL RAIL PRESSURE SENSOR CIRCUIT PERFORMANCE P0471 - EXHAUST PRESSURE SENSOR 1 PERFORMANCE (for cold climate / icing concerns) P1451 - DIESEL PARTICULATE FILTER SYSTEM PERFORMANCE P2000 - NOx ABSORBER EFFICIENCY BELOW THRESHOLD P2002 - DIESEL PARTICULATE FILTER EFFICIENCY BELOW THRESHOLD (for high altitude failures) P2195 - O2 SENSOR 1/1 OUT OF RANGE HIGH P2196 - O2 SENSOR 1/1 OUT OF RANGE LOW P2262 - TURBOCHARGER BOOST PRESSURE NOT DETECTED - MECHANICAL P2270 - O2 SENSOR 1/2 OUT OF RANGE HIGH P2271 - O2 SENSOR 1/2 OUT OF RANGE LOW P241A - O2 SENSOR 1/1 AND 1/2 OXYGEN CONCENTRATION MISMATCH P245B - EGR COOLER BYPASS STATUS LINE INTERMITTENT P2453 - DIESEL PARTICULATE FILTER PRESSURE SENSOR A CIRCUIT PERFORMANCE P2457 - EXHAUST GAS RECIRCULATION COOLING SYSTEM PERFORMANCE P2609 - INTAKE AIR HEATER SYSTEM PERFORMANCEVehicles flashed to address the above codes should be driven and repair validated. If code(s) return, follow diagnostic procedures available in DealerCONNECT/TechCONNECT.Improvements other than DTC robustness or enhancements: Add EMP sensor value on WiTech Improve cruise control functionality Display correct EGR position on WiTech Display correct Crankcase Pressure on WiTech Display Correct alternator voltage in WiTech Corrected CAC Outlet temperature voltage reading Correct for OBD II Readiness for frequent regeneration monitor Improve EVIC message regarding idle shut down (Informs driver of automatic shutdown due to excessive idle time) WiTech turbo hysterisis test revision. ScanTool may report a code as stored, even though the fault has been cl
Associated Products (1)Associated Documents - November 21, 2012•Document ID: 10128923Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-053-12
- Date Added:
- February 21, 2018
- Manufacturer:
- DODGE
SummaryFlash: RHR, RHW Or RHP Radio Software Enhancements This bulletin involves upgrading the software on the RHR, RHW or RHP Radio. The customer may experience one or more of the following conditions. Erratic alternate frequency switching (International only). Bluetooth phone muting during European traffic announcement (International only). Lost channel presets, home addresses, address book entries & Travel Link favorites. Not able to change default country and state then route. Unable to load .jpeg files onto hard drive to display on touch screen. Vehicle with Start/Stop feature, the screen will go black when the engine turns off at a stop. (International only). Incomplete Travel Link temperature displayed when the temperature is over 100F. Example, if the temperature is 107F the screen will display 07. (Domestic U.S. only). Cancel key inoperative after pressing the international button. iPhone4 dial not possible after second call. Missing Travel Link buttons from SAT menu (Domestic U.S. only). Devices button disabled in VES menu. Unable to route to a recent route after a map update. Remove Travel Link disclaimer popup (Domestic U.S. only). Duplicate phone numbers in popup after pressing the international button. During active call and on hold, DIAL button should be displayed (not ?TONE? button). International button not visible. Point of interest (POI) Search enhancements. When video in remote DVD player is stopped devices button wrongly labeled as DVD. Access Travel Link immediately after radio no update when staying on TL screen. iPod, track selection enhancements.
Associated Products (27)2013 Chrysler 2002013 Dodge Challenger2013 Dodge Durango2013 Dodge Grand Caravan2013 Jeep Grand Cherokee2013 Jeep Wrangler2012 Chrysler 2002012 Dodge Caliber2012 Dodge Challenger2012 Dodge Durango2012 Dodge Grand Caravan2012 Dodge Ram2012 Jeep Compass2012 Jeep Grand Cherokee2012 Jeep Liberty2012 Jeep Wrangler2011 Chrysler 2002011 Dodge Caliber2011 Dodge Challenger2011 Dodge Durango+ 7 moreAssociated Documents - November 21, 2012•Document ID: 10063258Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-012-12REV.A
- Date Added:
- April 26, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - November 3, 2012•Document ID: 10216330Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; SUSPENSION:FRONT:STABILIZER BAR
- Mfr Comm. #:
- 02-001-12 REV. A
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryIncorrect Front Right and/or Left Stabilizer Link This bulletin involves inspecting and if necessary replacing the front right and left stabilizer links. 4X4 front stabilizer links have been installed on 4X2 vehicles. If one of the two links are replaced at a later date, with the correct 4x2 link, the customer may notice a slight lean in the vehicle less than 1 inch (25 mm) to the right or left side.
Associated Products (1)Associated Documents - November 3, 2012•Document ID: 10136453Service Bulletin/Repair InstructionsSUSPENSION:FRONT
- Mfr Comm. #:
- 02-001-12 REV. A
- Date Added:
- May 14, 2018
- Manufacturer:
- DODGE
SummaryIncorrect Front Right and/or Left Stabilizer Link This bulletin involves inspecting and if necessary replacing the front right and left stabilizer links. 4X4 front stabilizer links have been installed on 4X2 vehicles. If one of the two links are replaced at a later date, with the correct 4x2 link, the customer may notice a slight lean in the vehicle less than 1 inch (25 mm) to the right or left side.
Associated Products (1)Associated Documents - November 3, 2012•Document ID: 10128915Service Bulletin/Repair InstructionsSUSPENSION:FRONT:STABILIZER BAR
- Mfr Comm. #:
- 02-001-12 REV. A
- Date Added:
- February 21, 2018
- Manufacturer:
- DODGE
SummaryIncorrect Front Right and/or Left Stabilizer Link This bulletin involves inspecting and if necessary replacing the front right and left stabilizer links. 4X4 front stabilizer links have been installed on 4X2 vehicles. If one of the two links are replaced at a later date, with the correct 4x2 link, the customer may notice a slight lean in the vehicle less than 1 inch (25 mm) to the right or left side.
Associated Products (1)Associated Documents - October 30, 2012•Document ID: 10063261Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-013-12REV.A
- Date Added:
- April 26, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - October 4, 2012•Document ID: 10064484Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 23-030-12
- Date Added:
- May 13, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - October 1, 2012•Document ID: 10048019Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING
- Mfr Comm. #:
- CSN-M07
- Date Added:
- December 12, 2012
- Manufacturer:
- DODGE
SummaryDODGE: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. IN SOME TRUCKS, DURING ASSEMBLY, THE UNDERHOOD LAMP AND GLOVE BOX LAMP WERE NOT INSTALLED. MODEL 2011 RAM SPORT. *PE
Associated Products (1)Associated Documents - May 1, 2012•Document ID: 10044849Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- CSN-M-19
- Date Added:
- August 2, 2012
- Manufacturer:
- DODGE
SummaryDODGE: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. DURING TRUCK ASSEMBLY, THE BATTERIES MAY HAVE BEEN DAMAGED AND DEVELOPED A CRACK THAT MAY LEAK ELECTROLYTE AND /OR SHORTEN BATTERY LIFE. *PE
Associated Products (2)Associated Documents