Dodge · Model Report
Showing safety data for the 2007 model year only.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.
Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
CHRYSLER IS RECALLING 20,283 MY 2006-2009 CHARGER AND MAGNUM VEHICLES BUILT WITH THE POLICE PACKAGE AND EQUIPPED WITH A COLUMN SHIFTER. THE GEARSHIFT CABLE MAY BECOME DISENGAGED FROM THE STEERING COLUMN MOUNTING BRACKET AND CAUSE AN INCORRECT TRANSMISSION GEARSHIFT POSITION DISPLAY.
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
ON CERTAIN PASSENGER AND SPORT UTILITY VEHICLES AND PICKUP TRUCKS EQUIPPED WITH AUTOMATIC TRANSMISSIONS, THE SOFTWARE PROGRAMMED INTO THE POWERTRAIN CONTROL MODULE CAN CAUSE A MOMENTARY LOCK UP OF THE DRIVE WHEELS IF THE VEHICLE IS TRAVELING OVER 40 MPH AND THE OPERATOR SHIFTS FROM DRIVE TO NEUTRAL AND BACK TO DRIVE.
The engine in my vehicle (2007 Charger, 49,000 miles) has completely failed due to "Casting Sand Sludge". This issue has been acknowledged by FCA Stellantis; but only in much newer engines. The failure in my vehicle, from the "casting sand sludge" caused the vehicle to have engine heat issues, which could have started a fire or resulted in the complete seizure of the engine at speed, potentially leading to a catastrophic and fatal outcome. The fact that the issue is present in my vehicle strongly indicates that FCA Stellantis was aware of the Casting Sand Sludge issue far earlier than they have acknowledged. The Service center suspected a head gasket issue, so they began to address it; what they found was casting sand sludge throughout the engine block. An issue which is an inherent defect of manufacturing, which is unknowable to a unsuspecting owner - until a total failure occurs. This issue would also coincidentally constitute a breach of the "implied Warranty Of Merchantability", as the issue makes affected vehicles not fit for their intended purpose. The Service Center that found the defect is an Authorized FCA Stellantis Dealer/Service Provider. The Service Manager has had an "Conference Call" with an Area Service Manager & A Service Technical Advisor. The Service Manager has indicated that it is casting sand & has told me that if the manufacturer has him send them the engine that i what he is putting on the report. He has told me that he feels that the manufacturer likely will try to bury the issue by attempting a "Forced Buyout". Cursory, research by myself has found that Casting Sand in the presence of H.O.A.T or O.A.T. coolant & heat forms a sludge which over time {40,000 to 55,000 miles} renders an engine unusable, risking catastrophic failure or fire. LX Platform vehicles of the era 2005-2009 were considered "Durable for intended purpose for 150,000 to 300,000 miles". Casting Sand left in the engine block, during manufacture, violates that durability
No injuries · No fire · No crash
i didnt not see any warning lights. till this days Nobody knows what is wrong with the car.
No injuries · No fire · No crash
shuts off while driving with no warning...Stalls at stop light/sign and when i try to accelerate it has barely goes.. sometimes it seems like it has no power at all and sometimes it seems like it has to much power without me accelerating. Its very dangerous this issue has almost made me get into several accidents
No injuries · No fire · No crash
Filled fuel tank up until the pump shut off. As I drove onto the road, the engine suddenly died causing me to run off the shoulder as the power steering went out as well. I eventually got it re-started, but it ran rough and stalled out several more times on my way home. After some online research, I determined that it was probably raw gas getting pulled down the EVAP tube. I avoid the problem now by not filling the tank up all the way, but do it once in a while accidently and the problem returns. Highly dangerous situation.
No injuries · No fire · No crash
SERVICE BULLETIN # 14-002-14: Fuel tank "roll over" valve failed immediately after fill-up saturating the purge solenoid and dryer canister for the fuel vapor vent reburning system. This service bulletin described failure caused liquid fuel rather than vapor to be dumped into the intake manifold stalling the vehicle in traffic in unsafe conditions. The car was towed to Beamon Dodge at 1705 S. Church St., 37130 awaiting repair. Dodge customer service was contacted at 1-800-423-6343 where they stated that this VIN was not covered by the service bulletin. Quoted repair for the manufacture defect is $4,680.48. Clearly the vehicles covered by this service bulletin are incomplete. Complaints of this failure can be found on the internet through 2014 when this service bulletin was issued on April 22, 2014. Clearly Dodge corrected nothing in their manufacturing and NHTSA is not protecting all consumers.
No injuries · No fire · No crash