BMW 640i Service Bulletins
597 manufacturer communications on file.
- February 1, 2013•Document ID: 10149452Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 640113
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryIHKA Operating Panel Buttons Are Peeling.
Associated Products (57)Associated Documents - February 1, 2013•Document ID: 10149450Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 620413
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryHead-Up Display: M View Defaults to Standard View. INFORMATION Do not replace any parts. Since this is part of the Head-Up Display concept change, it is normal operation after programming the vehicle with ISTA/P 2.47.1 or higher. ??From integration level: F010-12-07-531 or higher Note: It is not possible to change the functionality of the Head-Up Display to how it performed before the software update.
Associated Products (5)Associated Documents - February 1, 2013•Document ID: 10149449Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 620213
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryInstrument Cluster Only Displays Background Image and Gear Indicator. The display in the instrument cluster intermittently only shows the background image and the gear indicator. * No fault code is stored * All gauges function correctly Note: The issue is rectified after a sleep mode cycle (ignition off for approx. 16 minutes). Software error in the instrument cluster introduced with software I-level 12-03-500 or higher (ISTA/P 2.46.1 or higher)
Associated Products (26)Associated Documents - February 1, 2013•Document ID: 10149446Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 610211
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryAdvanced Onboard Battery Diagnostics. Starting with the introduction of the F10 (5 Series), an advanced intelligent battery sensor has been used. This now makes it possible for the vehicle to monitor the condition of the battery in order to determine if the battery needs to be recharged or replaced, along with the remaining capacity of the battery. The analysis and testing of the battery's SoC (Stateof Charge) and SoH (State of Health) is now performed using ISTA (Integrated Service Technical Application) diagnosis. A separate test using a battery tester is no longer needed.
Associated Products (72)Associated Documents - February 1, 2013•Document ID: 10149439Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 513012
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryGrating/Grinding Noise from the Center Console. A grating noise can be heard coming from the left front side of the front console trim panel, where it meets the instrument panel, especially when driving on rough roads. CAUSE Insufficient gap clearance between the console trim and the instrument panel.
Associated Products (5)Associated Documents - January 1, 2013•Document ID: 10149309Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- 621012
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryHead-Up Display Is Too Dark. The Head-up Display (HUD) is too dark. Rain/light/solar/condensation sensor (RLSB) hardware error
Associated Products (59)Associated Documents - January 1, 2013•Document ID: 10149304Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- 340213
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryIncorrect Remaining Service Life from CBS Data for Brake Pads. The calculated remaining service life for the brake pads (front and/or rear axle) from the CBS data does not match the actual brake pad thickness. The customer notices implausible remaining distances (too high or too low) on the front and/or the rear axle brake system. Software calculation of the brake pad wear model
Associated Products (29)Associated Documents - January 1, 2013•Document ID: 10149300Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
- Mfr Comm. #:
- 130712
- Date Added:
- November 26, 2018
- Manufacturer:
- BMW
SummaryN63 and S63 Engine: High-pressure Fuel Injector Replacement Procedures. The customer complains that one of the following scenarios has been encountered while operating the vehicle: * During a cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. * During a hot start, the engine runs very roughly and the Service Engine Soon lamp is illuminated. * While driving or idling, the engine will misfire and the Service Engine Soon lamp is illuminated. * Various misfire faults are stored in DME fault memory. CAUSE An internal failure of the high-pressure fuel injector can lead to incorrect operation.
Associated Products (69)Associated Documents - December 1, 2012•Document ID: 10150389Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 652212
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryService Action: CIC - Install Navigation Road Map Database 2013. The Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
Associated Products (70)Associated Documents - December 1, 2012•Document ID: 10150383Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 613812
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary"Service Action: Program Control Units (CAS). After programming/coding the vehicle with ISTA/P 2.48.1 or earlier, the Car Access System (CAS) was incorrectly coded. This causes the anti-theft alarm system panic button on the remote control to not function. AFFECTED VEHICLES This Service Action involves F01, F02, F04, F06, F07, F10, F12, F13 and F25 vehicles which were produced August 2010 to June 2012. In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 637. If code number 637 has been punched out, the campaign has already been performed. If code number 637 has not been punched out, it will be necessary to utilize the ""Service Menu"" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action. Important Note: A campaign can be reserved in ISPA Light as ""Pending"" prior to submission of a claim. If you find this campaign reserved, please verify the reason before attempting to perform this repair."
Associated Products (46)Associated Documents - December 1, 2012•Document ID: 10150378Service Bulletin/Repair InstructionsVISIBILITY:POWER WINDOW DEVICES AND CONTROLS
- Mfr Comm. #:
- 512312
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryFront Door Window/Rear Side Window Reverses when Closing. When using the automatic window closing feature, intermittently the rear window automatically reverses. CAUSE Sensitivity of the anti-trap feature
Associated Products (5)Associated Documents - December 1, 2012•Document ID: 10150376Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 340112
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryService Action: Replace Integrated Chassis Control Module (ICM). Due to a hardware fault in the ICM control module, an error code may be stored during engine start. If this condition were to occur, the airbag warning lamp would illuminate and be accompanied by a Check Control Message and acoustic warning.
Associated Products (5)Associated Documents - December 1, 2012•Document ID: 10150375Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 330212
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryRattling Noise from Rear Axle. A rattling noise is heard from the rear axle when driving over rough or uneven road surfaces. Internal tolerances of rear shocks
Associated Products (5)Associated Documents - October 1, 2012•Document ID: 10150334Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 651512
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary"Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD). Note: The INITIAL enabling code ""FSC CIC map, N. America 2013 INITIAL"" is necessary to start the installation process and to activate the road map database."
Associated Products (70)Associated Documents - October 1, 2012•Document ID: 10150327Service Bulletin/Repair InstructionsVISIBILITY:GLASS, SIDE/REAR
- Mfr Comm. #:
- 512312
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryFront Door Window/Rear Side Window Reverses when Closing. When using the automatic window closing feature, intermittently the rear window automatically reverses. CAUSE Sensitivity of the anti-trap feature
Associated Products (5)Associated Documents - October 1, 2012•Document ID: 10150323Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 310112
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
SummaryClicking Noise from Front Axle. Clicking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers). CAUSE Movement between the contact surfaces of the wheel bearing and swivel bearing (knuckle)
Associated Products (56)Associated Documents - October 1, 2012•Document ID: 10150318Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 130612
- Date Added:
- December 3, 2018
- Manufacturer:
- BMW
Summary"N63 and N74 Engine: ISTA/D 2.33 Diagnostic Error in the Low-pressure Fuel Supply Sensor Value. INFORMATION When diagnosing the low-pressure fuel supply sensor with one of the following test plans and ISTA/D 2.33, an error will be encountered in the display. The value of the low-pressure fuel supply sensor will read 0 bar at all times. * B1214_DI6KNDR * D18KHDR * AT1214_DIKNDR * AT1214_DIKHDR Do not replace the low-pressure fuel supply sensor. The operating pressure of the low-pressure fuel supply sensor can found in ""DME Diagnostic Query"" using the following procedure: 1. Exit the test plan and return to the control unit tree. http://www.bmwtis.net/tiscode/cgi-bin/omcgi.exe?sie_path=/tsb/bulletins/htm_store/14907...11/7/2012 Page 2 of 2 2. Select ""DME"" in the control unit tree. 3. Select "" Call Up ECU Functions."" 4. Select ""Diagnostic Query."" 5. Select ""Fuel Pressure (Low Pressure)."" 6. Select ""Query Status."" The engine must be running to verify operation of the pressure sensor. The software error will be corrected in ISTA/D 2.34, scheduled for release in December 2012. "
Associated Products (56)Associated Documents