Bentley Flying Spur Service Bulletins
974 manufacturer communications on file.
- November 2, 2020•Document ID: 10183483Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2061195/1
- Date Added:
- December 2, 2020
- Manufacturer:
- BENTLEY
SummaryTelephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns. Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list document within the Measure section is required to capture an accurate description of customer telephone issues.
Associated Products (2)Associated Documents - October 30, 2020•Document ID: 10182397Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2053177/13
- Date Added:
- November 7, 2020
- Manufacturer:
- BENTLEY
SummaryAll Vehicle Variants - Spurious DTC List. Customer statement / workshop findings Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted
Associated Products (2)Associated Documents - October 30, 2020•Document ID: 10182396Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2061064/1
- Date Added:
- November 7, 2020
- Manufacturer:
- BENTLEY
SummarySecondary air injection - Missing ODIS data. Customer statement / workshop findings: Not all data for the secondary air injection operation is available when using ODIS Technical background: Data is only available for four of the eight secondary air monitors on each cylinder bank therefore some test plans and related tasks are not currently available
Associated Products (1)Associated Documents - October 30, 2020•Document ID: 10182018Service Bulletin/Repair InstructionsEQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2057978/4
- Date Added:
- November 3, 2020
- Manufacturer:
- BENTLEY
SummaryEngine Lubricating Oil - Replenishment. Customer statement / workshop findings: Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services. Technical background: In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified running-in periods consume more oil during the running-in period, and the oil consumption will stabilize after the running-in period. Refer to the Owners Manual for specific running-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue, and the oxidation level of the oil. Certain driving conditions may negatively influence the rate of oil consumption. This can occur while the vehicle is operated in city driving conditions, for example: stop and go traffic with extended idle periods.
Associated Products (2)Associated Documents - October 29, 2020•Document ID: 10182171Service Bulletin/Repair InstructionsENGINE; ELECTRICAL SYSTEM; POWER TRAIN; EQUIPMENT
- Mfr Comm. #:
- 2053170/6
- Date Added:
- November 5, 2020
- Manufacturer:
- BENTLEY
SummaryGear shift optimisation procedure - W12 TSI only. Customer statement / workshop findings: Customer reporting dissatisfaction with transmission shift quality in various driving conditions Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non- approved aftermarket modifications conducted including the modification of the engine control modules ( chip tuning) Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further repairs relating to the shift quality complaint Technical background: IMPORTANT: To allow the engine and transmission to adapt to the customers driving style the vehicle MUST either have covered at least 1000 miles/1600 Km or must have been used over a six week period (which ever occurs first) before carrying out the instructions within this TPI
Associated Products (1)Associated Documents - October 29, 2020•Document ID: 10182047Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2053351/6
- Date Added:
- November 3, 2020
- Manufacturer:
- BENTLEY
SummaryBuzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle.
Associated Products (2)Associated Documents - October 29, 2020•Document ID: 10182020Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 2058423/4
- Date Added:
- November 3, 2020
- Manufacturer:
- BENTLEY
SummaryNew Continental GT/GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life Customer statement/workshop findings: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure -Lower limit not reached stored in the Master Engine Control Unit (ECU) Technical background: CAUTION: DO NOT CONTINUE WITH THIS DOCUMENT IF THE ENGINE EXHIBITS ANY ABNORMAL MECHANICAL NOISE OR HAS AN ENGINE LUBRICATING OIL LEAK SEEK FURTHER ADVICE THROUGH A NEW OR EXISTING DISS QUERY
Associated Products (2)Associated Documents - October 26, 2020•Document ID: 10182333Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2059246/2
- Date Added:
- November 6, 2020
- Manufacturer:
- BENTLEY
SummaryBuzzing/vibration from the left and/or right headlamp and/or DTCs C119C01-C119D01 stored - Matrix beam headlamp only. Customer statement / workshop findings: Buzzing noise may be evident from the left and/or right headlamp Workshop findings The following DTCs may also be evident in 00D6 Light control left 2 (Matrix beam) and/or 00D7 Light control right 2 (Matrix beam) C119C01 Fan for headlamp electrical error C119D01 Fan 2 for headlamp electrical error Technical background: Wiring harness routed incorrectly within the headlamp module at the rear of the headlamp, the noise and DTCs are evident due to the harness contacting the headlamp cooling fan
Associated Products (1)Associated Documents - October 26, 2020•Document ID: 10182169Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES; STRUCTURE:BODY:DOOR; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2059333/2
- Date Added:
- November 5, 2020
- Manufacturer:
- BENTLEY
SummaryUnable to open, or delay in opening the Drivers or Front passenger door from outside using the door handle (Keyless). Customer statement / workshop findings: Unable to open, or a delay in opening the driver or passenger front door from the outside of the vehicle when using the door handle (keyless entry) Technical background: In the event there is a customer complaint regarding the opening of the door from the outside of the vehicle when using the door handle (Keyless entry) please refer to the Measure section of this TPI
Associated Products (1)Associated Documents - October 26, 2020•Document ID: 10182114Service Bulletin/Repair InstructionsSTEERING; WHEELS
- Mfr Comm. #:
- 2060446/4
- Date Added:
- November 4, 2020
- Manufacturer:
- BENTLEY
SummaryClicking noise from the front wheels when conducting a static lock to lock steering manoeuvre. Customer statement / workshop findings: Clicking noise from the front wheels whilst performing a static lock to lock steering manoeuvre Technical background: Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2060446
Associated Products (1)Associated Documents - October 22, 2020•Document ID: 10182386Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 2058516/2
- Date Added:
- November 7, 2020
- Manufacturer:
- BENTLEY
SummaryTicking noise from the rear cabin area. Customer statement/workshop findings: Ticking noise can be heard from inside the rear of the cabin when sitting in the rear seats Technical background: The noise can be heard when the engine is at operating temperature, after a drive cycle or an extended idle period, the noise is most evident with the armrest lowered with all electrical consumers switched off. The ticking noise occurs when the purge system is in operation, the vibrations emitted from the purge valve are then amplified through the fuel pipes to the rear of the vehicle. This is normal operation and no further investigation work is required as the vehicle is operating to specification.
Associated Products (1)Associated Documents - October 22, 2020•Document ID: 10182288Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2055580/4
- Date Added:
- November 6, 2020
- Manufacturer:
- BENTLEY
SummaryRotating Display - Fault Diagnosis. Customer statement/workshop findings Various rotating display operational complaints or noises. Technical background Follow the measure section of this TPI that relates to your customer complaint. Measure: Follow the below instructions that relates to your customer complaint.
Associated Products (1)Associated Documents - October 22, 2020•Document ID: 10182287Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2055846/3
- Date Added:
- November 6, 2020
- Manufacturer:
- BENTLEY
SummaryInfotainment screen turns red sporadically. Customer statement/workshop findings: Infotainment screen turns red sporadically (Figure 1) Technical background: Refer to Measure section of this TPI
Associated Products (1)Associated Documents - October 22, 2020•Document ID: 10182179Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2055772/3
- Date Added:
- November 5, 2020
- Manufacturer:
- BENTLEY
SummaryBattery conditioner inoperative. Customer statement / workshop findings: Technical background: Corrosion on the contact surfaces of the charger socket and charger lead. If the charging socket or charger lead are wet when the charger is connected this can cause corrosion on the contacts. Measure: Check for corrosion on the contact surfaces of both the charger socket and charger lead.
Associated Products (1)Associated Documents - October 22, 2020•Document ID: 10182125Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; STEERING
- Mfr Comm. #:
- 2058837/2
- Date Added:
- November 4, 2020
- Manufacturer:
- BENTLEY
SummaryDTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500). Customer statement / workshop findings: DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Diagnostic address 44 Technical background: Refer to the Measure section of this TPI
Associated Products (1)Associated Documents - October 22, 2020•Document ID: 10182066Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- 2057947/3
- Date Added:
- November 5, 2020
- Manufacturer:
- BENTLEY
SummaryTPMS Warning light - DTC U012700 evident. Customer statement / workshop findings Customer statement: Tyre pressure monitoring system warning light on within the DIP Technical background: DTC U012700 evident within Address 0019 Gateway Measure: 1) Replace the Tyre pressure control module and bracket (Figure 1) - Refer to Rep.Gr 44
Associated Products (1)Associated Documents - October 22, 2020•Document ID: 10182065Service Bulletin/Repair InstructionsSEAT BELTS; EQUIPMENT
- Mfr Comm. #:
- 2058411/2
- Date Added:
- November 5, 2020
- Manufacturer:
- BENTLEY
SummarySeat belt buckle stop button - Missing. Customer statement / workshop findings: Seat belt buckle stop button missing Technical background: The seat belt buckle stop button should be evident as shown in Figure 1
Associated Products (2)Associated Documents - October 22, 2020•Document ID: 10182048Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2054599/6
- Date Added:
- November 3, 2020
- Manufacturer:
- BENTLEY
SummaryHeadlamp operation issues. Customer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which may be evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to
Associated Products (2)Associated Documents - October 21, 2020•Document ID: 10182385Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 2060605/3
- Date Added:
- November 7, 2020
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Rear Entertainment - Component Protection. Customer statement / workshop findings: Rear Entertainment display screen shows Component Protection Active. Diagnostic Trouble Code (DTC) U110100 Component Protection Active stored within 004E (Display/Control head HR) and/or 005E (Display/Control Head LH). Technical background: This concern is currently under investigation.
Associated Products (1)Associated Documents - October 21, 2020•Document ID: 10182335Service Bulletin/Repair InstructionsSUSPENSION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 2060688/3
- Date Added:
- November 6, 2020
- Manufacturer:
- BENTLEY
SummaryNew Flying Spur - Knock noise from rear of the vehicle. Customer statement / workshop findings: During light acceleration and/or braking to stop, a knock noise can be heard from the rear wheel arch area(s). The noise is most pronounced when seated in the rear of the vehicle. Technical background: Please refer to Video for TPI 2060688 on the Bentley Hub, should the symptom be as shown in the video, the operative MUST first conduct a full inspection of the suspension system, in particular the rear suspension system
Associated Products (1)Associated Documents