Audi RS 7 Service Bulletins
2,091 manufacturer communications on file.
- May 29, 2015•Document ID: 10120052Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A971548 2013504-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
Associated Products (202)Associated Documents - May 21, 2015•Document ID: 10120050Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- A941567 2027773-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 94 number 12-96 dated November 1, 2012. Part or all of the daytime running lights do not work on vehicles equipped with LED daytime running lights. For vehicles with halogen daytime running lights, refer to TSB 2017488: 94 Halogen Daytime running lights do not work. In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated control module. This TSB is for servicing information only.
Associated Products (77)Associated Documents - May 18, 2015•Document ID: 10120047Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- A911587 2040406-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummaryWhen the vehicle is started, the GPS location or vehicle direction indicated on the MMI navigation map does not match the vehicle's actual location or direction of travel for a long period of time (often as long as 10 minutes). The issue occurs in open sky, with no large buildings obstructing the sky view. The issue is intermittent, but it can occur for long periods of time during a single day. The issue typically happens on very warm days when the HVAC system blower is at a medium to high setting (auto or manual), with air being directed out of the panel vents. When the issue occurs, the GPS navigation system satellite reception shows 0 satellites. Due to the infrequency of the issue, this might not be verifiable. No DTCs related to the GPS antenna or MMI system are present. If the sky view is blocked because the vehicle is in a parking structure, below ground, or next to large buildings, it is normal for the GPS location or vehicle direction indicated on the MMI navigation map to not match the vehicle's actual location or direction of travel. The blocked sky view prevents the vehicle from receiving satellites, and the system may be temporarily lost until four satellites can be received. This is a normal condition, and is not related to the condition described above. Replacing the MMI main unit will not change this behavior. A potential failure in the internal hardware of the MMI main unit can cause the GPS signal to be blocked, even if good reception is available. The failure can happen at start-up or while the vehicle is being driven. The issue typically starts when the vehicle is driven on curvy or circular roads, driven in circles (such as when driven around a parking lot), or driven on or off an expressway.
Associated Products (22)Associated Documents - May 18, 2015•Document ID: 10120041Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A871563 2010146-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 87 number 14-54 dated August 28, 2014. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
Associated Products (168)Associated Documents - May 13, 2015•Document ID: 10120031Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A171562 2040644-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummaryA metallic whistling or grinding sound is heard from the engine compartment when the vehicle is at idle speed. The sound usually only occurs when the engine is warm. The MIL is sporadically on. DTC P2279 and DTC P0507 are stored in the ECM. A leak in the crankcase breather module (pressure regulating valve) can cause this condition.
Associated Products (20)Associated Documents - May 13, 2015•Document ID: 10120029Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM
- Mfr Comm. #:
- A011522 2038045-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 14-88 dated August 15, 2014. The MIL is on. DTC P218100 (Cooling System Performance) is stored in the engine control module (ECM), J623 (address word 01). DTC P218100 will be stored if, after a specified air flow (warm-up phase), the measured engine temperature does not reach the value in the timing map. Particles in the cooling system from the production process affect the closing of the coolant thermostat. Replacing the coolant temperature sender does not fix the problem.
Associated Products (10)Associated Documents - May 8, 2015•Document ID: 10120043Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- A911583 2030465-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 13-07 dated September 12, 2013. Group "A" complaints: Valid for vehicles with MMI software below version 566. Group "B" complaints: Valid for vehicles with MMI software at or above version 566 but below 715. Group "C" complaints: Valid for vehicles with MMI software at or above version 715 but not including 814. This bulletin only applies to vehicles with MMI3G+ Navigation (PR Number "7T6") and to vehicles with MMI3G+ Navigation, but without Audi Connect (PR Number "7T6" with additional PR code of "PND"). Continual improvements to MMI software provides solutions to issues experienced in the field.
Associated Products (75)Associated Documents - May 1, 2015•Document ID: 10120049Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD WIPER/WASHER
- Mfr Comm. #:
- A921510 2038151-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 92 number 14-09 dated September 12, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. The operation of the level sensor relies on the composition of the solvent to provide an accurate message on the solvent level. Incorrect concentration and the presence of additives can contaminate the sensor and reduce its sensitivity.
Associated Products (63)Associated Documents - April 24, 2015•Document ID: 10120002Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; BACK OVER PREVENTION: CAMERA SYSTEM
- Mfr Comm. #:
- A911582 2029903-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-42 dated June 20, 2012. The customer complains about the picture quality of rearview backup camera image in the MMI screen. The picture is fuzzy or distorted. The picture looks too bright, too dark, or opaque in certain areas of the image. The colors of the objects in the image are incorrect or slightly off. The guidelines used for parking are fuzzy, distorted, or pixelated when compared with the guidelines displayed on another vehicle?s MMI.
Associated Products (140)Associated Documents - April 17, 2015•Document ID: 10120003Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- A941565 2012749-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
Associated Products (200)Associated Documents - March 20, 2015•Document ID: 10120676Service Bulletin/Repair InstructionsENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- A271525 2036392-
- Date Added:
- October 25, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 27 number 14-23 dated April 24, 2014. Vibrations are felt at 1000 rpm and 3000 rpm. DTCs may be stored in the subframe mount control module. Optimized J931 control module software.
Associated Products (15)Associated Documents - March 20, 2015•Document ID: 10119956Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- A911579 2038824-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014. The following message appears on the MMI display: "Device or cable type not supported". The AMI cable being used is a genuine Audi-branded cable with an Audi part number (see Required Parts and Tools for a list of valid part numbers). The "Device or cable type not supported" message may be displayed when an incorrect AMI cable type is connected to the MMI system. Only cables with an Audi part number (i.e., 4F0.XXX.XXX) are supported by the MMI system. Volkswagen-branded cables look similar, but are not guaranteed to work with Audi MMI systems. The label on the end of an Audi-branded cable has an Audi logo and Audi part number. Audi-branded cables have unique firmware inside the hardware that can determine which MMI system and iOS device are connected to the cable. Volkswagen cables do not have this firmware. The firmware is required to allow the system to function normally due to the different technology available in the different MMI systems and in the different iPhones and iPod Touch devices. In addition, the AMI system was designed to play the music stored locally on the connected device only. Music streaming (from Spotify or Pandora, for example) is not supported, and music stored in the cloud (on Google Play, Amazon Prime, or iTunes Match/iCloud, for example) may drop out, pause, and skip when played.
Associated Products (207)Associated Documents - March 19, 2015•Document ID: 10119974Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI - 2016 A7-S7
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
Associated Products (3)Associated Documents - March 19, 2015•Document ID: 10119973Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI - 2016 A7-S7
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi delivery guidelines checklist.
Associated Products (3)Associated Documents - March 10, 2015•Document ID: 10119955Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- A911578 2011500-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 08-129 dated November 12, 2008. Customer states that the reception of satellite radio occasionally fades or drops out. The information display may show a message related to the satellite radio, such as "Linking", "Updating", "Acquiring Signal", "Loading", "No Signal", or "No Sat".
Associated Products (177)Associated Documents - March 9, 2015•Document ID: 10119940Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- A011514 2014753-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves, intake manifold, fuel injectors, and combustion chambers, engine running rough after cold start, excessive engine cranking time, hesitations while driving, rough engine idle, Reduced engine performance, and/or Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire, lean fuel system, or air/fuel ratio imbalance in the engine control module. Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Associated Products (182)Associated Documents - March 6, 2015•Document ID: 10119946Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A171557 2010043-
- Date Added:
- October 21, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
Associated Products (198)Associated Documents - February 25, 2015•Document ID: 10120731Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI - 2016 A7-S7
- Date Added:
- October 25, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
Associated Products (3)Associated Documents - February 25, 2015•Document ID: 10120730Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PDI - 2016 A7-S7
- Date Added:
- October 25, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the Audi delivery guidelines checklist.
Associated Products (3)Associated Documents - February 13, 2015•Document ID: 10120682Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A011507 2028344-
- Date Added:
- October 25, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
Associated Products (201)Associated Documents