Audi · Model Report
Showing safety data for the 1998 model year only.
NHTSA concluded its investigation (EA04017) into reports of stuck-open throttles in certain 1998-1999 Audi A4 and A6 vehicles. While a recall (04V-495) was issued for approximately 28,300 A6 vehicles, the failure rate for A4 models was significantly lower. Owners should still be aware of potential…
NHTSA conducted an Engineering Analysis (EA00021) into 1996-2000 Audi A4 vehicles concerning reports of degraded braking performance when driving in wet weather. This investigation explored the potential safety risks and outcomes for owners.
Volkswagen Group of America, Inc. (Audi) is recalling certain 1998 Audi A8 and 1997-1998 Audi A4 vehicles equipped with Non-Azide Driver air bag Inflators (NADI) that do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.
CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE TIE RODS OF THE STEERING ASSEMBLY ARE PROTECTED ON EACH SIDE BY A SEAL TO PREVENT MOISTURE AND DUST PARTICLES FROM ENTERING THE SWIVEL BEARING MECHANISM. IT IS POSSIBLE THAT SOME TIE ROD SEALS MAY NOT SEAL PROPERLY.
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS. A CONTROL VALVE IN THE VACUUM HOSE CONNECTING THE BRAKE BOOSTER TO THE INTAKE MANIFOLD MAY NOT OPEN OR CLOSE FULLY AT TEMPERATURES BELOW -4 F UNDER CERTAIN DRIVING CONDITIONS.
Recall 69bt was not accomplished at McDaniels Audi of Charleston dealer. They indicated they had replaced airbag with 8D0898201A kit.
No injuries · No fire · No crash
The contact owned a 1998 Audi A4. The contact stated that while driving at 35-40 MPH with his 12-year-old son sitting in the passenger seat, he crashed into another vehicle. The air bags failed to deploy. There were no warning lights illuminated. The contact did not sustain any injuries, however, his son sustained a broken rib and was transported to the hospital. A police report was filed. The vehicle was towed to a tow lot, where it was totaled. The contact recently received a recall notice for NHTSA Campaign Number: 20V056000 (AIR BAGS). The dealer and the manufacturer were not made aware of the failure. The approximate failure mileage was 80,000.
Takata recall. The contact owns a 1998 Audi A4. The contact received notification of NHTSA Campaign Number: 20V056000 (Air Bags) however, the part to do the recall repair was unavailable. The contact took the vehicle to the local dealer and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
No injuries · No fire · No crash
TL* THE CONTACT OWNS A 1998 AUDI A4. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 20V056000 (AIR BAGS) HOWEVER, THE PART TO DO THE RECALL REPAIR WAS NOT YET AVAILABLE. A DEALER WAS NOT CONTACTED. THE CONTACT STATED THAT THE MANUFACTURER HAD EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
No injuries · No fire · No crash
THE AIRBAG FAULT LIGHT AND ABS LIGHT HAVE BEEN ON EVER SINCE I HAD THE VEHICLE, THINKING THAT IT MAY BE A FAULT BY THE MANUFACTURER AS SEEING VERY COMMON PROBLEMS IN MANY WEBSITES. ANOTHER MAIN CONCERNED IS THE FAULT OF THE MANUFACTURER'S ENGINE DESIGN CAUSING ENGINE DAMAGE FROM OIL SLUDGE. MY CONCERN IS FOR FUTURE PREVENTION MEASURES.
No injuries · No fire · No crash