2021 Audi Q8 2nd Gear Start Information TSB
Audi Technical Service Bulletin 37 24 24 2074749/2 addresses customer inquiries about certain vehicles, including the 2021 Audi Q8, starting in 2nd gear. This TSB clarifies that this behavior is a normal operating characteristic designed for comfort and efficiency, not an indication of a fault or…

Gilt auch für
- Audi Q7
- 2021
- Audi RS Q8
- 2021
- Audi SQ7
- 2021
- Audi SQ8
- 2021
Audi has released Technical Service Bulletin (TSB) 37 24 24 2074749/2 to provide information regarding vehicles that sometimes start in 2nd gear. This TSB, dated August 27, 2024, supersedes previous bulletin 24-12 from July 31, 2024. It clarifies that the behavior of an Audi Q8 2nd gear start under specific conditions is intentional and not a malfunction.
Symptoms
Owners may notice that their vehicle sometimes starts in 2nd gear instead of 1st gear. This observation is the primary symptom addressed by this bulletin.
Technical Background
Audi vehicles are designed to pull away in 2nd gear under certain driving situations for comfort and efficiency reasons. This behavior is not a defect but a programmed characteristic of the transmission system. Specific scenarios where an Audi Q8 2nd gear start might occur include:
- Partially automated driving: Such as when using Adaptive Cruise Control (ACC mode).
- Pulling away downhill: When the vehicle is moving in the direction of travel on a decline.
- Congestion situations: To improve smoothness and reduce gear changes in stop-and-go traffic.
- Efficiency: Optimizing fuel consumption and reducing wear on transmission components.
- Bridged electrical starting: Applicable to vehicles with a 0D7 gearbox.
Starting in 2nd gear helps reduce the frequency of gear changes, thereby enhancing driving comfort for the occupants.
Diagnosis
When investigating this customer concern, technicians will find no fault entries in the diagnostic logs. Specifically, there will be no event entries in the 0001 engine control unit or the 0002 gearbox control unit related to this characteristic. This absence of fault codes confirms that the vehicle is operating as intended.
Important Information for Owners
It is crucial for owners to understand that the occasional Audi Q8 2nd gear start is not a fault and does not indicate any damage to the vehicle's components. The TSB explicitly states that these driving characteristics are not considered a warranty issue. Furthermore, replacing parts will not resolve this behavior because it is an intended design feature. This Technical Service Bulletin is purely informational and does not qualify for any Audi Warranty claims.
What Owners Should Know
If you experience your 2021 Audi Q8 or other affected models starting in 2nd gear, there is no need for concern or repair. This is a normal function of your vehicle's transmission, designed to optimize your driving experience. Dealers are instructed to explain this technical background to customers, clarifying that no components are damaged and no parts replacement is effective or necessary. All part and service references, such as those mentioned in TSB 2074729, are subject to change, so always consult with your Audi service center for the latest information.
Source: NHTSA ID: 11007307
Frequently Asked Questions
- Why does my Audi Q8 sometimes start in 2nd gear?
- Your Audi Q8, along with other affected models, is designed to sometimes start in 2nd gear under specific conditions. This is a normal operating characteristic intended to improve driving comfort and efficiency, particularly during partially automated driving, pulling away downhill, or in congested traffic, as detailed in Audi TSB 37 24 24 2074749/2.
- Is an Audi Q8 2nd gear start a sign of a transmission problem?
- No, an Audi Q8 2nd gear start is not a sign of a transmission problem or any fault. Audi Technical Service Bulletin 37 24 24 2074749/2 explicitly states that these driving characteristics are not a fault, do not cause damage to components, and are not covered by warranty for repair purposes.
- Will my Audi dealership fix the 2nd gear start issue?
- Since the 2nd gear start is an intended design feature for comfort and efficiency, your Audi dealership will not perform a repair. The TSB clarifies that parts replacement is not effective, and there are no fault codes (like from the 0001 engine control unit or 0002 gearbox control unit) indicating a malfunction.
- Does this information apply to other Audi models besides the Q8?
- Yes, this information applies to several Audi models from model year 2021, including the Audi Q7, SQ7, RS Q8, and SQ8, especially those equipped with 0D5 or 0D6 gearboxes. The behavior is consistent across these vehicles for the same comfort and efficiency reasons.
Related Articles
2021-2025 Audi Engine Control Module Software Update 53ZC
Audi has issued an update to its Engine Control Module (ECM) software campaign 53ZC / WARR EXT – U82, dated March 20, 2026. This dealer communication indicates that additional vehicles have been added to the affected chart for this important software update. Owners of 2021-2025 Audi Q8, A7, A6…
2021-2025 Audi Fuel System DTCs P014800 and P008700
Audi Technical Service Bulletin (TSB) 2079461/3 details diagnostic and repair procedures for 2021-2025 Audi vehicles experiencing a 'MIL light on' or 'limp-home function' due to fuel system DTCs P014800 or P008700. This bulletin guides technicians on diagnosing and potentially replacing the…
2021-2025 Audi Black Trim Discoloration TSB
Audi has issued Technical Service Bulletin 2078651/4 to address red, purple, gray, or metallic discoloration on black exterior trim strips in 2021-2025 Audi models. This TSB explains the cause (paint UV resistance issue) and outlines the replacement procedure for affected components.
2021 Audi Virtual Cockpit Display Fault TSB 2078439/2
Audi TSB 2078439/2 addresses issues with the virtual cockpit display in 2021 A6, A7, A8, Q7, Q8 models, including a black screen or "Instrument cluster: fault" message, often accompanied by DTC B200049.
2021-2026 Audi TFSI Engine Oil Leak TSB 2053278/10
Audi has released Technical Service Bulletin 2053278/10 to address oil leaks from the cylinder head on 2.9 and 3.0 TFSI engines in various 2021-2026 models. Learn about symptoms, diagnosis, and the recommended repair process.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.