2021-2022 Audi A5/Q5 R242 Calibrate Control Module Test Hotfix
Audi has released Service Bulletin AOS-22-13, providing instructions for a hotfix to address a software issue affecting the R242 Calibrate Control Module test within the ODIS Service diagnostic software for 2021-2022 A5 and Q5 vehicles. This hotfix must be removed after use.
Marcus Weber2021 Audi A5
Gilt auch für
- Audi A5
- 2022
- Audi Q5
- 2021
Important Warnings for Technicians
Audi has issued critical warnings regarding the use of this hotfix:
- "We recommend installation of this hotfix on one diagnostic device ONLY."
- "Hotfix must be removed immediately after performing the procedure."
- "The Hotfix must be removed after performing the diagnostic procedure."
- "Failure to do so will cause other vehicle diagnostics sessions to malfunction."
What is the R242 Calibrate Control Module Test Hotfix?
Audi has released Service Bulletin AOS-22-13 to address a software issue within the R242 Calibrate Control Module test. This issue affects the Offboard Diagnostic Information System Service (ODIS Service) software, which is used for vehicle diagnostics. The hotfix, identified as A_2.28.3_mfk_V3_20220620-091130, ensures that the R242 Calibrate Control Module Test functions correctly when performed using ODIS Service.
Prerequisites for Installation
Before installing the hotfix, technicians must ensure that Audi ODIS Service Diagnostic Content version 2.28.3 is installed on their diagnostic device. This can be verified within the ODIS Service software by navigating to the "Info > Versions" menu.
Repair Procedure Summary
Service Bulletin AOS-22-13 outlines a detailed, temporary process for technicians to apply the hotfix to their ODIS Service diagnostic software. The procedure involves several key steps:
- Download the Hotfix: Access the
R242 Calibrate Control Module Test Hotfix.zipfile from AccessAudi.com > ServiceNet, specifically under Vehicle Diagnostics > Offboard Diagnostic Information System Service > Hotfixes/software. Save this file to the Windows desktop. - Extract and Copy: Open the downloaded
.zipfile and copy the hotfix file, named A_2.28.3_mfk_V3_20220620-091130, to the desktop. - Install into ODIS Service: Open ODIS Service as an administrator. Navigate to the Data submenu, select "Hotfix," and then "Download." Browse to the desktop, select the hotfix file, and confirm the import of the workshop data patch.
- Perform Diagnostic Procedure: Once the hotfix is installed, the necessary diagnostic procedure, such as the Audi A5 R242 Calibrate Control Module Test, can be performed.
- Uninstall the Hotfix: Immediately after completing the diagnostic procedure, the hotfix must be removed. This is done by navigating to the Data submenu in ODIS Service, selecting "Hotfix," and then "Delete." Confirm the removal of the active workshop patch.
This process ensures the correct functioning of the Audi A5 R242 Calibrate Control Module Test while preventing potential malfunctions in other diagnostic sessions.
Contact Information
For any questions or concerns regarding this hotfix or for diagnostic tester software support, technicians can contact Audi's support line at 888-896-1298 or send an email to [email protected].
Source: NHTSA ID 10214847
Galerie
6 Bilder
Frequently Asked Questions
- What is the purpose of the R242 Calibrate Control Module Test Hotfix?
- The R242 Calibrate Control Module Test Hotfix, detailed in Audi Service Bulletin AOS-22-13, corrects a software issue within the R242 Calibrate Control Module test in the ODIS Service diagnostic system.
- Which Audi vehicles are affected by the software issue addressed by AOS-22-13?
- This hotfix applies to 2021-2022 Audi A5 and 2021 Audi Q5 vehicles, specifically concerning the diagnostic procedures performed on them using the ODIS Service software.
- Why is it important to remove the hotfix after use?
- Audi explicitly states that the hotfix must be removed immediately after performing the diagnostic procedure. Failure to do so will cause other vehicle diagnostics sessions to malfunction.
- What is the required ODIS Service Diagnostic Content version for this hotfix?
- To install this hotfix, technicians must have Audi ODIS Service Diagnostic Content version 2.28.3 already installed on their diagnostic device.
Related Articles
2021-2026 Audi Cracking/Creaking Noises During Load Changes TSB
Audi has issued Technical Service Bulletin 2062633/6 to address cracking and creaking noises that may occur in 2021-2026 Audi models during vehicle load changes or severe body torsion. This TSB outlines a repair for a loose bonded joint in the subframe connection.
2020-2021 Audi MIB3 Favorites, Destinations Deleted TSB
This Technical Service Bulletin (TSB) 2079619/1 addresses a software issue in 2020-2021 Audi A4, A5, S4, S5, and RS5 models where the MIB3 system sporadically deletes last destinations, favorites, and home addresses. A software update is required to resolve this problem.
2021-2025 Audi Cracking/Creaking Noises TSB 2062633/4
Audi has issued TSB 2062633/4 to address cracking/creaking noises in 2021-2025 models. This noise, often heard during load changes or body torsion, originates from a loose bonded joint in the subframe. The TSB outlines a repair procedure involving a modified longitudinal member and cavity sealing.
2021-2025 Audi A4/A5 Engine Coolant Temperature Sensor TSB
This Technical Service Bulletin (2078939/1) from Audi addresses a specific diagnostic trouble code, P218500, related to the Engine Coolant Temperature Sensor 2 Circuit High. Owners may notice the exhaust emissions warning lamp (MIL) illuminating on the instrument cluster.
2021-2026 Audi Camera Part Return Notice SM 15-2025
Audi's Special Notice SM 15-2025 instructs dealers to return specific camera part numbers that are not "generation 03S" by March 18, 2025, to ensure customers receive correct parts.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.