Toyota Sienna Service Bulletins
1,392 manufacturer communications on file.
- June 20, 2018•Document ID: 10142897Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES:DOORS:LATCH
- Mfr Comm. #:
- ZH4_Toyota POL17
- Date Added:
- July 16, 2018
- Manufacturer:
- TOYOTA
SummaryWarranty Policy Bulletin: Toyota has received a number of reports regarding sliding door front lock assemblies on certain 2011?2016 model year Sienna vehicles. In these reports, during the closing operation of the left and/or right side sliding door, the door would not completely close and latch due to corrosion on the latch lever pin of the door?s front lock assembly.
Associated Products (6)Associated Documents - June 20, 2018•Document ID: 10142890Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- ZG5_Toyota POL17
- Date Added:
- July 16, 2018
- Manufacturer:
- TOYOTA
SummaryWarranty Policy Bulletin: Toyota has received reports of customer concerns in which the power moon roof, power sliding doors or power hatch are inoperative from the overhead console switches or require excessive pressure on the overhead console switches to operate. Due to parts availability this Warranty Enhancement Program will be launched in 2 phases as illustrated below: 1 Camry and Camry Hybrid Certain 2012 March, 2017 Repair, Available 2 Sienna Certain 2011-2013 June, 2017 Repair Available.
Associated Products (6)Associated Documents - June 6, 2018•Document ID: 10142870Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- T-SB-0045-14_Obs
- Date Added:
- July 16, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: OBSOLETE NOTICE May 10, 2018: This bulletin is now obsolete. Please see T-SB-0033-18.
Associated Products (7)Associated Documents - May 25, 2018•Document ID: 10141610Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- T-SB-0039-15_Rev
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE May 25, 2018 Rev1: * The Introduction, Production Change Information, and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2003 - 2011 model year Toyota vehicles may exhibit a condition where the instrument panel pad (dashboard) becomes cracked and/or sticky. Follow the procedure in this bulletin to address this condition.
Associated Products (27)2011 Toyota Camry2011 Toyota Sienna2010 Toyota Avalon2010 Toyota Camry2010 Toyota Sienna2009 Toyota Avalon2009 Toyota Camry2009 Toyota Sienna2008 Toyota Avalon2008 Toyota Camry2008 Toyota Camry Solara2008 Toyota Sienna2007 Toyota Avalon2007 Toyota Camry2007 Toyota Camry Solara2007 Toyota Sienna2006 Toyota Avalon2006 Toyota Camry Solara2006 Toyota Sienna2005 Toyota 4Runner+ 7 moreAssociated Documents - May 24, 2018•Document ID: 10141609Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Toyota Safety Re
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummarySafety Recall and Service Campaign - Technician Certification Requirements.
Associated Products (18)2018 Toyota 4Runner2018 Toyota 862018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Corolla2018 Toyota Highlander2018 Toyota Land Cruiser2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota Prius V2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota YarisAssociated Documents - May 15, 2018•Document ID: 10141583Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- T-TT-0498-18
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryTT: Some customers may experience issues using Entune or Scout functions of the head unit. The following is a diagnostic supplement to assist in understanding how to diagnose this system.
Associated Products (5)Associated Documents - May 14, 2018•Document ID: 10141582Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- T-TT-0497-18
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryTT: Some vehicles may experience a condition in which the 2nd row seat, with center seat, exhibits a chirp/squeak noise from the rear seat latches (floor area). This condition is present while driving over rough or bumpy roads. Upon further inspection, after removal of the LH 2nd row seat, the rear inboard and outboard strikers may show signs of the coating peeling off as shown in Fig.2 and Fig.3.
Associated Products (8)Associated Documents - May 10, 2018•Document ID: 10141576Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- T-TT-0442-17_Rev
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryTT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The trail period of service is provided upon the vehicle purchase. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as "ATX webserver is Down" or "ATX error" will be displayed.
Associated Products (66)2019 Toyota 4Runner2019 Toyota Avalon2019 Toyota Camry2019 Toyota Highlander2019 Toyota Land Cruiser2019 Toyota Prius2019 Toyota Sienna2018 Toyota 4Runner2018 Toyota Avalon2018 Toyota Camry2018 Toyota Highlander2018 Toyota Land Cruiser2018 Toyota Prius2018 Toyota Prius V2018 Toyota Sienna2017 Toyota 4Runner2017 Toyota Avalon2017 Toyota Camry2017 Toyota Highlander2017 Toyota Land Cruiser+ 46 moreAssociated Documents - May 10, 2018•Document ID: 10141575Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- T-SB-0033-18
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0045-14. * Applicability has been updated to include 2018 model year Sienna vehicles. * The entire bulletin has been updated. Service Bulletin No. T-SB-0045-14 is obsolete and any printed versions should be discarded. Some 2011 - 2018 model year Sienna vehicles may exhibit a vibration/pulsation from the front brakes that can be felt in the brake pedal while lightly applying the brake pedal. Follow the Repair Procedure in this bulletin to address this condition.
Associated Products (8)Associated Documents - May 8, 2018•Document ID: 10141569Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- T-SB-0197-17_Rev
- Date Added:
- June 18, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE May 08, 2018 Rev1: * Applicability has been updated to include 2019 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: * Hybrid Vehicle (HV) battery - Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE - BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and apply the parking brake completely. The shift lever CANNOT be shifted from the "P" position with the auxiliary battery disconnected. * If the negative (-) terminal of the auxiliary battery is reconnected, even if the power button is in the Start mode, the hybrid system may NOT start. In this case, push the Power button and select the Start mode again to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual.
Associated Products (25)2019 Toyota 4Runner2019 Toyota 862019 Toyota Avalon2019 Toyota Camry2019 Toyota C-HR2019 Toyota Corolla2019 Toyota Highlander2019 Toyota Land Cruiser2019 Toyota Mirai2019 Toyota Prius2019 Toyota Prius C2019 Toyota RAV42019 Toyota Sequoia2019 Toyota Sienna2019 Toyota Tacoma2019 Toyota Tundra2019 Toyota Yaris2018 Toyota Avalon2018 Toyota Camry2018 Toyota Highlander+ 5 moreAssociated Documents - March 21, 2018•Document ID: 10152121Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- T-SB-0337-17-Obs
- Date Added:
- December 17, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: OBSOLETE NOTICE March 21, 2018: This bulletin is now obsolete. Please see T-SB-0279-17.
Associated Products (9)Associated Documents - March 16, 2018•Document ID: 10152116Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT; EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- T-SB-0279-17-Rev
- Date Added:
- December 17, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE March 16, 2018 Rev1: ? Applicability has been updated to include 2018 model year vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0103-16 and T-SB-0337-17. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0103-16 and T-SB-0337-17 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Some 2016 ? 2018 model year vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (version 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ? Head unit reboots at a specific location ? Abnormal Destination Search app operation ? Rebooting caused by no songs on the USB-connected iPhone ? A one-time reboot after ignition is cycled to ACC-ON ? Audio stays muted after the key is cycled
Associated Products (26)2018 Toyota 4Runner2018 Toyota Avalon2018 Toyota Highlander2018 Toyota Prius2018 Toyota Prius V2018 Toyota Sequoia2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota Yaris2017 Toyota 4Runner2017 Toyota Avalon2017 Toyota Highlander2017 Toyota Prius2017 Toyota Prius V2017 Toyota Sequoia2017 Toyota Sienna2017 Toyota Tacoma2017 Toyota Tundra2016 Toyota 4Runner2016 Toyota Avalon+ 6 moreAssociated Documents - March 9, 2018•Document ID: 10152109Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- T-TT-0484-18 Rev
- Date Added:
- December 17, 2018
- Manufacturer:
- TOYOTA
SummaryTT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
Associated Products (26)2018 Toyota 4Runner2018 Toyota Avalon2018 Toyota Highlander2018 Toyota Prius2018 Toyota Prius V2018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota Yaris2017 Toyota 4Runner2017 Toyota Avalon2017 Toyota Highlander2017 Toyota Prius2017 Toyota Prius V2017 Toyota Sequoia2017 Toyota Sienna2017 Toyota Tacoma2017 Toyota Tundra2016 Toyota Highlander+ 6 moreAssociated Documents - February 27, 2018•Document ID: 10130009Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- T-TT-0472-17_Rev
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummaryTT: Some customers may experience an inoperative Entune Apps Suite and Scout moving maps when connecting an Apple device with iOS version 11.2.1 - 11.2.5 via USB tethering.
Associated Products (2)Associated Documents - February 23, 2018•Document ID: 10130006Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Toyota Safety Re
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummarySafety Recall and Service Campaign - Technician Certification Requirements.
Associated Products (19)2018 Toyota 4Runner2018 Toyota 862018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Corolla2018 Toyota COROLLA iM2018 Toyota Highlander2018 Toyota Land Cruiser2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota Prius V2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota YarisAssociated Documents - February 23, 2018•Document ID: 10130004Service Bulletin/Repair InstructionsENGINE; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- T-SB-0016-18
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: Some 2016 ? 2017 model year Tacoma, 2017 model year Sienna and Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit a chirping noise from the high-pressure fuel pump. Follow the Repair Procedure in this bulletin to address this condition.
Associated Products (5)Associated Documents - February 22, 2018•Document ID: 10129999Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Toyota Safety Re
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummarySafety Recall and Service Campaign - Technician Certification Requirements.
Associated Products (19)2018 Toyota 4Runner2018 Toyota 862018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Corolla2018 Toyota COROLLA iM2018 Toyota Highlander2018 Toyota Land Cruiser2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota Prius V2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota YarisAssociated Documents - February 21, 2018•Document ID: 10129995Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- T-TT-0484-18
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummaryTT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired.
Associated Products (22)2018 Toyota Highlander2018 Toyota Prius2018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota Yaris2017 Toyota Avalon2017 Toyota Highlander2017 Toyota Prius2017 Toyota Prius V2017 Toyota Sequoia2017 Toyota Sienna2017 Toyota Tacoma2017 Toyota Tundra2016 Toyota Highlander2016 Toyota Prius2016 Toyota Prius V2016 Toyota Sequoia2016 Toyota Sienna+ 2 moreAssociated Documents - February 20, 2018•Document ID: 10129991Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Toyota Safety Re
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummarySafety Recall and Service Campaign - Technician Certification Requirements.
Associated Products (19)2018 Toyota 4Runner2018 Toyota 862018 Toyota Avalon2018 Toyota Camry2018 Toyota C-HR2018 Toyota Corolla2018 Toyota COROLLA iM2018 Toyota Highlander2018 Toyota Land Cruiser2018 Toyota Mirai2018 Toyota Prius2018 Toyota Prius C2018 Toyota Prius V2018 Toyota RAV42018 Toyota Sequoia2018 Toyota Sienna2018 Toyota Tacoma2018 Toyota Tundra2018 Toyota YarisAssociated Documents - February 16, 2018•Document ID: 10129966Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM
- Mfr Comm. #:
- T-SB-0235-17_Rev
- Date Added:
- March 12, 2018
- Manufacturer:
- TOYOTA
SummaryTSB: REVISION NOTICE February 16, 2018 Rev2: ? Applicability has been updated to include 2018 model year Mirai and Camry HV vehicles. ? The Introduction and Initialization/Update Procedure sections have been updated. ? Instructions for adding a Safety Connect static cling to applicable vehicles have been added. July 20, 2017 Rev1: ? Applicability has been updated to exclude 2018 model year Avalon vehicles. ? The Initialization/Update Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. An initialization procedure is required to activate the Entune? App Suite Connect for Entune? 3.0 Audio, Entune? 3.0 Audio Plus, and Entune? 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Following the initialization procedure, individual Entune? apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure.
Associated Products (2)Associated Documents