Nissan · Model Report
Showing safety data for the 2024 model year only.
Nissan North America, Inc. (Nissan) is recalling certain 2024 Nissan Frontier vehicles. The right-side headlight assemblies may have missing or illegible headlight aim markings, which can result in improperly aimed headlights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Nissan North America, Inc. (Nissan) is recalling certain 2024 Frontier vehicles. The front right-side lower link may have been manufactured with an oversized ball joint, which can result in corrosion and ball joint separation from the front right-side lower link.
Nissan North America, Inc. (Nissan) is recalling certain 2024 Titan, Frontier, Infiniti QX60, Pathfinder, 2023-2024 Sentra, Versa, Kicks, Infiniti QX50, and 2023 Rogue vehicles. Due to a manufacturing issue, the driver's air bag inflator may absorb moisture, and cause the air bag to deploy improperly.
Truck has 13,000 miles Truck didnt start. Had to have some jump start. Took it to dealership. They Said battery passed but recharged it. 2 months later Truck died in the middle of a busy intersection. Could of got rear ended. I have my [XXX] child with me at all times. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
Back window shattered. Nothing hit it.
No injuries · No fire · No crash
Back window shattered. Nothing hit it.
No injuries · No fire · No crash
This is a nine speed transmission which basically shifts up each gear every 5 to 6 MPH until you hit 9th gear about 52 MPH. The transmission will not shift to next gear fast enough causing the vehicle to be very slow. The transmission has to go through 5 gears to get to 30 MPH. Each gear shifts at 1650 to over 2000 RPM before it will shift to next gear. If the air conditioning is running the least amount of RPM's is over 2000 or higher to shift up to next gear. At 2000 RPM's the engine has very little torque needed from the transmission due to the 3.692 axle ratio and sounds like the engine is revving higher than it should be. If you don't relax on the gas pedal it will stay in that gear and just rev the RPM's in the gear it is in, until you let off the gas pedal for it to shift up. If you need high acceleration at low speeds it just won't shift up to next gear. I have almost been rear ended many times trying to get onto an expressway or accelerating from a red light to get up to posted speed limit. If you have 5 gears to get to 30 MPH then they have to shift at low RPM's (1250 to 1500 RPM"s) and as fast as possible to get the speed of the vehicle up quickly. The transmission has engine braking and will decelerate through each gear. If you are slowing the truck with foot off the brake and then accelerate the driveshaft and rear end will clunk so you have to be gentle with the pedal to prevent loud clunking noises. It will clunk back into first gear at times when braking to stop the vehicle. It is unsafe to drive when getting up to posted speed is crucial.
No injuries · No fire · No crash
Transmission hunts between gears at 25-30mph. Downshifts are delayed or hesitates during hard acceleration. Delayed shifting during slow turns.
No injuries · No fire · No crash