Nissan Altima Service Bulletins (2019)
188 manufacturer communications on file.
- June 14, 2019•Document ID: 10162976Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB19-045
- Date Added:
- July 22, 2019
- Manufacturer:
- NISSAN
SummaryMIL ON WITH DTC P0087, P0101, P0448, OR P2008 IF YOU CONFIRM An applied vehicle has a stored DTC shown in Table A on the next page, AND The ECM part number is shown in Table B, starting on page 3. ACTION First, perform the appropriate diagnostic procedure for the stored code to repair the vehicle according to the Electronic Service Manual (ESM), AND Reprogram the ECM after performing the diagnosis and repair.
Associated Products (16)Associated Documents - May 31, 2019•Document ID: 10161345Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- NTB18-055c
- Date Added:
- June 24, 2019
- Manufacturer:
- NISSAN
SummaryCVT FLUID LEVEL QUICK CHECK GAUGE This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (35)2019 Nissan Altima2019 Nissan Maxima2019 Nissan Murano2019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Sentra2018 Nissan Altima2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2017 Nissan Altima2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Quest2017 Nissan Rogue2017 Nissan Sentra2016 Nissan Altima+ 15 moreAssociated Documents - May 22, 2019•Document ID: 10161409Service Bulletin/Repair InstructionsLANE DEPARTURE; LANE DEPARTURE: SENSING SYSTEM: LIDAR; LANE DEPARTURE: SENSING SYSTEM: CAMERA
- Mfr Comm. #:
- NTB19-042
- Date Added:
- June 24, 2019
- Manufacturer:
- NISSAN
SummaryAEB WARNING LIGHT BLINKING This bulletin applies only to vehicles equipped with a lane camera. SERVICE INFORMATION If the AEB warning light is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: - When contamination or foreign material adhere to the lane camera viewing window on the windshield - When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield - When the lane camera viewing window on the windshield is temporarily fogged up NOTE: - If DTCs are present in any of the following related systems: - Laser/Radar, - ICC/ADAS, or - Lane Camera, Refer to the related Electronic Service Manual (ESM) for diagnosis. - Refer to the following pages for further information.
Associated Products (20)2019 Nissan Altima2019 Nissan Armada2019 Nissan Leaf2019 Nissan Maxima2019 Nissan Murano2019 Nissan Rogue2018 Nissan Armada2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Rogue2017 Nissan Armada2017 Nissan Maxima2017 Nissan Murano2017 Nissan Rogue2016 Nissan Maxima2016 Nissan Murano2016 Nissan Rogue2015 Nissan Murano2015 Nissan RogueAssociated Documents - May 8, 2019•Document ID: 10161408Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB19-041
- Date Added:
- June 24, 2019
- Manufacturer:
- NISSAN
Summary2019 ALTIMA; CREAK OR POP NOISE WHEN TURNING AND ACCELERATING OR DECELERATING This bulletin applies to vehicles equipped with a 2.5L (PR25DD) engine ONLY. IF YOU CONFIRM A creak or pop noise is heard from the front of the vehicle when turning right while accelerating or decelerating. ACTION Replace the engine mounting insulator (LH) with the one listed in the PARTS INFORMATION. - For the procedure to replace the engine mounting insulator (LH) refer to the Electronic Service Manual (ESM): section REPAIR > ENGINE > ENGINE MECHANICAL > REMOVAL AND INSTALLATION > ENGINE MOUNTING INSULATOR (LH)
Associated Products (1)Associated Documents - April 26, 2019•Document ID: 10160180Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- NTB19-008a
- Date Added:
- May 20, 2019
- Manufacturer:
- NISSAN
SummaryNISSAN; DIAGNOSIS INFORMATION FOR DTC P161D This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (6)Associated Documents - April 4, 2019•Document ID: 10160182Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- NTB19-029
- Date Added:
- May 20, 2019
- Manufacturer:
- NISSAN
SummaryINTELLIGENT KEY DOES NOT WORK AFTER BATTERY REPLACEMENT SERVICE INFORMATION If the Intelligent Key of an APPLIED VEHICLE does not work after replacing the battery, inspect the positive (+) terminals. If the battery side of the Intelligent Key is held by pinching down on the terminals while removing the battery, it is possible to bend the terminals down far enough that they will not touch the contacts on the other half of the Intelligent Key. If the terminals are found to be bent down, pry them back up so that they will come in contact with the other half of the Intelligent Key?s contacts. - Refer to the photos on the following pages.
Associated Products (8)Associated Documents - March 29, 2019•Document ID: 10158443Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- PC692 - 2019 Alt
- Date Added:
- April 15, 2019
- Manufacturer:
- NISSAN
SummaryFuel Pump Dealer Inventory This bulletin applies only to vehicles equipped with Front Wheel Drive (FWD). *****Detailed Information***** Nissan is conducting a quality action to inspect and, if necessary, tighten the fuel pump lock ring on one hundred eleven (111) specific 2019 Altima (L34) FWD only vehicles identified in Service Comm. In rare occurrences, the lock ring may be completely disengaged which may require the fuel pump module and seal to be replaced. Due to a supplier issue that has since been corrected, it is possible that the fuel pump module?s lock ring is not fully engaged. If partially locked, it is possible for the fuel pump module?s lock ring to rotate to an unlocked position due to vibration during normal driving conditions. This condition may result in MIL illumination, fuel smell, and/or a rattle noise associated with the fuel pump module plastic flange. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles currently in new dealer inventory are affected by this quality action using Service Comm or DBS National Service History ? Open Campaign I.D. PC692 - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability.
Associated Products (1)Associated Documents - March 28, 2019•Document ID: 10158427Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN
- Mfr Comm. #:
- NTB12-103g
- Date Added:
- April 15, 2019
- Manufacturer:
- NISSAN
SummaryCVT / TCM CALIBRATION DATA ?WRITE? PROCEDURE This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (38)2019 Nissan Altima2019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Rogue Sport2019 Nissan Sentra2018 Nissan Altima2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Rogue Sport2018 Nissan Sentra2017 Nissan Altima2017 Nissan Juke2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Quest2017 Nissan Rogue2017 Nissan Sentra+ 18 moreAssociated Documents - March 28, 2019•Document ID: 10158426Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN
- Mfr Comm. #:
- NTB12-100b
- Date Added:
- April 15, 2019
- Manufacturer:
- NISSAN
SummaryCVT / TCM CALIBRATION DATA ?WRITE? PROCEDURE This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (35)2019 Nissan Altima2019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Rogue Sport2018 Nissan Altima2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Rogue Sport2017 Nissan Altima2017 Nissan Juke2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Quest2017 Nissan Rogue2016 Nissan Altima2016 Nissan Juke2016 Nissan Maxima+ 15 moreAssociated Documents - March 15, 2019•Document ID: 10158442Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- PC689 2019 Altim
- Date Added:
- April 15, 2019
- Manufacturer:
- NISSAN
SummaryFront Exhaust Tube Voluntary Emission Recall Campaign ***** Campaign Summary ***** Nissan is conducting a Voluntary Emissions Recall Campaign on approximately 5 specific MY2019 Altima (L34) vehicles identified in Service Comm. Due to a manufacturing issue that has since been corrected, certain vehicles may have an incorrect front exhaust tube installed. Dealers will inspect the etched number in the center of the rear front exhaust tube and, if found to be out of specification, replace the front exhaust tube with the correct specification part. ***** What Dealers Should Do**** 1. Verify if campaign applicability using Service Comm or National Service History ? Open Campaign I.D. PC689. - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460a for additional information 2. Dealers should use NTB19-024 to identify and, if necessary, correct any vehicles subject to this campaign. 3. Once repaired, dealers should submit the claim, using the claims coding provided, and release the vehicle.
Associated Products (1)Associated Documents - March 14, 2019•Document ID: 10158434Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB19-024
- Date Added:
- April 15, 2019
- Manufacturer:
- NISSAN
SummaryVOLUNTARY EMISSIONS RECALL CAMPAIGN 2019 ALTIMA; FRONT EXHAUST TUBE INTRODUCTION Nissan is conducting this voluntary emissions recall campaign on certain specific model year 2019 Altima vehicles. The front exhaust tube will be inspected and, if necessary, replaced. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC689 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer?s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary emissions recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer?s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of an emissions recall must be corrected prior to sale. Failure to do so can result in civil penalties and/or fines. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.
Associated Products (1)Associated Documents - March 4, 2019•Document ID: 10158431Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- NTB19-021
- Date Added:
- April 15, 2019
- Manufacturer:
- NISSAN
SummaryNISSAN; MIL ON WITH DTC P219A AND/OR P219B STORED This bulletin applies to Titan XD vehicles equipped with a VK56D gas engine only. SERVICE INFORMATION If the MIL is ON and DTC P219A (AIR FUEL RATIO IMBALANCE B1) and/or P219B (AIR FUEL RATIO IMBALANCE B2) is stored: - DO NOT replace the Air Fuel Ratio (A/F) sensor. - Refer to the applicable Electronic Service Manual (ESM) and follow the diagnostic procedure for DTC P219A and/or P219B.
Associated Products (49)2019 Nissan Altima2019 Nissan Armada2019 Nissan Frontier2019 Nissan Murano2019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Sentra2019 Nissan Titan2019 Nissan Versa2019 Nissan Versa Note2018 Nissan Altima2018 Nissan Armada2018 Nissan Frontier2018 Nissan Murano2018 Nissan NV2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2018 Nissan Versa+ 29 moreAssociated Documents - February 13, 2019•Document ID: 10154719Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- PC681 2019 Altim
- Date Added:
- March 18, 2019
- Manufacturer:
- NISSAN
SummaryFuel Tank Dealer Inventory *****Dealer Announcement***** Nissan is conducting a quality action to inspect the fuel tank on 80 specific 2019 Altima AWD vehicles identified in Service Comm. Due to a manufacturing issue that has since been corrected, the fuel readings may not be accurate due to the presence of a plastic slug inside the fuel tank. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Nissan requests dealers to complete this inspection and, if necessary, remedy any affected inventory prior to sale to ensure customer satisfaction. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History ? Open Campaigns I.D. PC681 - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Dealers should use the attached procedure to identify the presence of a plastic slug in the fuel tank for any vehicle subject to this quality action. - Nissan has developed an automatic parts shipment to provide affected dealers with replacement fuel sensing unit packing for affected vehicles in dealer inventory. Parts should begin to arrive at dealers on February 13, 2019 - If no plastic slug is present, install new fuel sensing unit packing and reinstall the fuel sensing unit assembly. Once reinstalled, the vehicle may be immediately released for sale. - If a plastic slug is present, remove the plastic slug, install new fuel sensing unit packing, and reinstall the fuel sensing unit assembly.
Associated Products (1)Associated Documents - February 4, 2019•Document ID: 10155159Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB16-028b
- Date Added:
- March 25, 2019
- Manufacturer:
- NISSAN
SummaryINTELLIGENT KEY BUTTONS INOPERATIVE BUT REQUEST SWITCHES WORK This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (25)2019 Nissan Altima2019 Nissan Kicks2019 Nissan Maxima2019 Nissan Murano2019 Nissan Pathfinder2019 Nissan Rogue2018 Nissan Altima2018 Nissan Kicks2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2017 Nissan Altima2017 Nissan Maxima2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2016 Nissan Altima2016 Nissan Maxima2016 Nissan Murano+ 5 moreAssociated Documents - January 29, 2019•Document ID: 10153033Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- NTB19-008
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
SummaryNISSAN; DIAGNOSIS INFORMATION FOR DTC P161D SERVICE INFORMATION When key registration is unsuccessful after BCM replacement, P161D (Immobilizer) will set when the ignition is turned on. Possible causes - Improper key registration - Defective BCM (Vehicles with Intelligent Key only) - EPS control unit (Vehicles with mechanical key only) - Intelligent Key unit (Vehicles with mechanical key only) Trouble Diagnosis NOTE: If DTC B2196-52 is stored with P161D, perform the diagnosis procedure for DTC B2196-52 first. - Before replacing the BCM, confirm that the keys were programmed correctly by ensuring the vehicle will start and that the lock/unlock buttons function normally. - If any keys do not function normally, re-register all of the keys. - After re-registering all of the keys, reconfirm each key's function. - If OK, erase the code to complete the repair. - If NG, diagnose the Key, BCM and/or EPS control unit per the ESM.
Associated Products (6)Associated Documents - January 29, 2019•Document ID: 10153007Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- NTB17-082b
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
SummaryNISSAN; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin does NOT apply to LEAF vehicles and Titan XD vehicles with V8 diesel engine. This bulletin has been amended. See Amendment History on the last page. Please discard previous versions of this bulletin.
Associated Products (207)2019 Nissan 370Z2019 Nissan Altima2019 Nissan Armada2019 Nissan GT-R2019 Nissan Kicks2019 Nissan Leaf2019 Nissan Maxima2019 Nissan Murano2019 Nissan NV2002019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Sentra2019 Nissan Titan2019 Nissan Versa2019 Nissan Versa Note2018 Nissan 370Z2018 Nissan Altima2018 Nissan Armada2018 Nissan Frontier2018 Nissan GT-R+ 187 moreAssociated Documents - January 29, 2019•Document ID: 10153001Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
- Mfr Comm. #:
- NTB15-049r
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (31)2019 Nissan Altima2019 Nissan GT-R2019 Nissan Leaf2019 Nissan Maxima2019 Nissan Murano2019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Titan2018 Nissan Altima2018 Nissan Armada2018 Nissan GT-R2018 Nissan Leaf2018 Nissan Maxima2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2018 Nissan Sentra2018 Nissan Titan2017 Nissan Altima2017 Nissan GT-R+ 11 moreAssociated Documents - January 29, 2019•Document ID: 10152998Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- NTB13-097g
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
SummaryALL MODEL YEAR 2012 AND NEWER NISSAN VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin does NOT apply to LEAF vehicles and Titan XD vehicles with V8 diesel engine. This bulletin has been amended. See Amendment History on the last page. Please discard previous versions of this bulletin.
Associated Products (145)2019 Nissan 370Z2019 Nissan Altima2019 Nissan Armada2019 Nissan GT-R2019 Nissan Kicks2019 Nissan Leaf2019 Nissan Maxima2019 Nissan Murano2019 Nissan NV2002019 Nissan Pathfinder2019 Nissan Rogue2019 Nissan Sentra2019 Nissan Titan2019 Nissan Versa2019 Nissan Versa Note2018 Nissan 370Z2018 Nissan Altima2018 Nissan Armada2018 Nissan Frontier2018 Nissan GT-R+ 125 moreAssociated Documents - December 3, 2018•Document ID: 10152981Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB18-082
- Date Added:
- February 19, 2019
- Manufacturer:
- NISSAN
SummaryVOLUNTARY RECALL CAMPAIGN 2019 ALTIMA; ENGINE CONTROL MODULE INTRODUCTION Nissan is conducting this voluntary recall campaign on certain specific model year 2019 Altima vehicles. The Engine Control Module (ECM) will be inspected, and if necessary, reprogrammed. This action will resolve a potential false Malfunction Indicator Lamp (MIL) issue. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number R1813 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer's responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer's inventory.
Associated Products (1)Associated Documents - November 21, 2018•Document ID: 10152530Service Bulletin/Repair InstructionsEQUIPMENT; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- PC669 2019 Altim
- Date Added:
- January 7, 2019
- Manufacturer:
- NISSAN
SummaryFuel Feeder Tube Clip Dealer Inventory *****Dealer Announcement***** Nissan is issuing a quality hold to require dealers to inspect the Fuel Feeder Tube Clip position and confirm it is in the lock position on ~15,800 specific 2019 Altima vehicles identified in Service Comm. The clips may not be fully locked into place. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Dealers must complete this inspection and if necessary, repair, prior to sale. The inspection and if necessary, repair; will take less than 15 minutes per vehicle to complete and no parts are required. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History ? Open Campaigns I.D. PC669 - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Dealers should inspect the Fuel Feeder Tube Clip position to confirm it is in the locked position. 3. Use the attached procedure to inspect any vehicles affected by this quality action: - If inspection result is ?OK?, dealers may submit a warranty claim using Op Code PC6690 and release the vehicle. - If the inspection result is ?NG? (clip is not fully locked into place) - Take a photograph of the clip position and email it to: [email protected] along with the following: - E-mail subject line: PC669 (Altima Fuel Feeder Tube Clip) - Attach Clear Pictures of the clip that is not locked into place. - Dealer Name: - Dealer Code: - Dealer Address:
Associated Products (1)Associated Documents