Mazda CX-30 Service Bulletins
684 manufacturer communications on file.
- October 4, 2022•Document ID: 10225720Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22f
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (13)Associated Documents - October 3, 2022•Document ID: 10225771Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- 01-011-22
- Date Added:
- November 4, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may have a "OW ENGINE OIL LEVEL" warning message and a CHECK ENGINE light illuminated in the instrument cluster with DTC P250F:00 stored in memory, and the oil level has actually decreased to near low. * DTC P250F:00 - Engine oil level signal: engine oil level low This is caused by an oil consumption increase due to damage of the valve seals on the exhaust side. To eliminate this concern, the design of these valve seals has been modified.
Associated Products (7)Associated Documents - September 29, 2022•Document ID: 10222563Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-061-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummaryThe Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. - BSM system indicates vehicle on the opposite side. - i-ACTIVSENSE indicator ring will not turn green - Rear Cross Traffic Alert (RCTA) does not work - Rear side radar sensor
Associated Products (10)Associated Documents - September 28, 2022•Document ID: 10222572Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-030-22a
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the MyMazda App not communicating to the vehicle properly which may result in the condition monitor information is not refreshed or remote door lock/unlock not functioning. This is caused by a failure in communication between the telematics communication unit and the MyMazda App. To correct this issue, the control software of the telematics communication unit has been modified.
Associated Products (9)Associated Documents - September 26, 2022•Document ID: 10222564Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 01-010-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may experience a squeaking noise may be heard from the exhaust manifold when the idle speed drops from fast idle to normal idle speed during cold start. This is caused by a variable valve being stuck in the closed position. When returning from fast idle to normal, the stuck valve suddenly opens due to thermal change around it which causes abnormal noise. To eliminate this concern, the internal design of the exhaust manifold has been modified.
Associated Products (3)Associated Documents - September 23, 2022•Document ID: 10222565Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 07-004-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain that after accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. To eliminate this concern, the control software of the PCM has been modified.
Associated Products (2)Associated Documents - September 13, 2022•Document ID: 10222566Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- 08-002-22a
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. - B1126:13 - Driver-side side air bag module circuit open circuit or resistance high - B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: - When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. - The DTC detection level is too sensitive. To eliminate these concerns: - The design of the connector terminals in the side air bag module has been modified for firmer contact. - The DTC detection level of the SAS control module has been optimized.
Associated Products (2)Associated Documents - September 8, 2022•Document ID: 10222553Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22e
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (9)Associated Documents - September 1, 2022•Document ID: 10222577Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-006-22
- Date Added:
- October 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA04_12002 or later).
Associated Products (2)Associated Documents - August 25, 2022•Document ID: 10219229Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-004-22d
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummaryCustomers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Associated Products (9)Associated Documents - August 25, 2022•Document ID: 10219228Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-22b
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: - Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. - Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF - MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. - If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. - If the reception is good to strong, proceed to the Repair Procedure.
Associated Products (9)Associated Documents - August 24, 2022•Document ID: 10218766Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-001-22c
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12002 or later).
Associated Products (4)Associated Documents - August 23, 2022•Document ID: 10218777Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- SA-059-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED are present.
Associated Products (5)Associated Documents - August 23, 2022•Document ID: 10218737Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-034-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain about a fuel gauge that fluctuates to a higher level at a stop on inclines, even after a long drive since it was fully refilled. This is caused by improper control software of the body control module (BCM). To eliminate this concern, the control software of the BCM has been modified.
Associated Products (2)Associated Documents - August 17, 2022•Document ID: 10218775Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- SA-057-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface
Associated Products (4)Associated Documents - August 17, 2022•Document ID: 10218769Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-005-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Ver. 7000C0A-NA06_12012 or later).
Associated Products (4)Associated Documents - August 17, 2022•Document ID: 10218733Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-030-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the MyMazda App not communicating to the vehicle properly which may result in the condition monitor information is not refreshed or remote door lock/unlock not functioning. This is caused by a failure in communication between the telematics communication unit and the MyMazda App. To correct this issue, the control software of the telematics communication unit has been modified.
Associated Products (8)Associated Documents - August 11, 2022•Document ID: 10218772Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-054-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummaryThis information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
Associated Products (4)Associated Documents - August 11, 2022•Document ID: 10218768Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 16-004-22
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome customers may complain that Mazda Connect does not start or that it takes a long time to restart after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware of the CMU has been improved.
Associated Products (8)Associated Documents - August 8, 2022•Document ID: 10218727Service Bulletin/Repair InstructionsLATCHES/LOCKS/LINKAGES
- Mfr Comm. #:
- 09-004-22a
- Date Added:
- September 6, 2022
- Manufacturer:
- MAZDA
SummarySome CX-5 and CX-30 customers may find that the liftgate does not close when pressing the power liftgate (PLG) rear switch located on the interior liftgate trim. This may be caused by PLG switch corrosion. Water from a high pressure car washer and/or condensation may drip onto the switch connector and cause corrosion. To eliminate this concern, the PLG rear switch has been modified with a waterproof connector. Some Mazda3, CX-30 and MX-30 customers may complain that the vehicle door locking system does not work when the door lock switch on the liftgate interior trim is pressed. DTC B11C4:23 (BCM - liftgate lock switch circuit malfunction) may be stored. This may be caused during a high pressure car wash and/or condensation. Water may enter through the rear center brand emblem base component and drip onto the switch connector causing corrosion. The rusted connector may also cause a battery drain. To eliminate this concern, the rear center brand emblem base has been modified to prevent water entry (Mazda3) and the rear harness has been modified to prevent water infiltration (Mazda3, CX-30 and MX-30).âÂÂ
Associated Products (3)Associated Documents