Mazda CX-3 Service Bulletins
807 manufacturer communications on file.
- May 1, 2019•Document ID: 10160575Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; BACK OVER PREVENTION
- Mfr Comm. #:
- SA-006-19a
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain about a MAZDA CONNECT system reboot or blank screen. Use the flowchart below to repair the vehicle.
Associated Products (24)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-92016 Mazda Mazda3+ 4 moreAssociated Documents - May 1, 2019•Document ID: 10160552Service Bulletin/Repair InstructionsSUSPENSION:FRONT:SHOCK ABSORBER; SUSPENSION
- Mfr Comm. #:
- 02-005-19-3503a
- Date Added:
- May 30, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may experience a creaking noise from the front shock absorber when going over bumps. Upon inspection, the coil spring is found to be broken at the lower part without any trace of an accident. It may be found during maintenance or service opportunity without customer complaints. Mud and sand caught between the coil spring and the lower spring seat causes paint damage on the coil spring, resulting in rust holes and uneven force application. To correct this issue, the shape of the lower spring seat has been modified.
Associated Products (8)Associated Documents - April 23, 2019•Document ID: 10159194Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM
- Mfr Comm. #:
- 01-008-19-3568a
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummarySome customer using âÃÂÃÂFlexibleâÃÂàsetting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.
Associated Products (11)Associated Documents - April 8, 2019•Document ID: 10159204Service Bulletin/Repair InstructionsSUSPENSION:FRONT:WHEEL BEARING; WHEELS
- Mfr Comm. #:
- SA-016-19
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryThere have been warranty claims submitted for noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
Associated Products (35)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-5+ 15 moreAssociated Documents - April 5, 2019•Document ID: 10159198Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-001-19b
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryAPPLE CARPLAY⢠/ ANDROID AUTO⢠FREQUENTLY ASKED QUESTIONS (FAQ)
Associated Products (25)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 5 moreAssociated Documents - April 4, 2019•Document ID: 10159199Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-002-19a
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryOn May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing the accessory locking lug nuts, make sure to use the appropriate part number for the vehicle you are working on.
Associated Products (10)Associated Documents - April 4, 2019•Document ID: 10159196Service Bulletin/Repair InstructionsWHEELS; WHEELS:LUGS/NUTS/BOLTS/STUDS
- Mfr Comm. #:
- RF-18-02R2
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryOn May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing new lug nuts or the accessory Wheel Lock Set, make sure to use the appropriate part number for the vehicle you are working on.
Associated Products (10)Associated Documents - April 1, 2019•Document ID: 10159201Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-013-19
- Date Added:
- April 25, 2019
- Manufacturer:
- MAZDA
SummaryMAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC desktop. 2. Reboot your PC, DO NOT start any application after restarting. 3. Run the resetting tool by double clicking the "Reset.bat" file (on your desktop from step 1). 4. Press any key after reading the notifications about the resetting tool.
Associated Products (107)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 87 moreAssociated Documents - March 28, 2019•Document ID: 10155439Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; LANE DEPARTURE: BLIND SPOT DETECTION
- Mfr Comm. #:
- 09-017-19-3473
- Date Added:
- March 29, 2019
- Manufacturer:
- MAZDA
SummaryIf the right-side Blind Spot Monitoring (BSM) control module is replaced for any reason, it is also necessary to replace the left-side BSM control module in order to complete the radar aiming procedure. If the right-side BSM control module is replaced alone, "Automatic Configuration" and "BSM Radar Aiming" cannot be completed due to a programming error in the module. Other possible symptoms that may be found if the right-side BSM module is replaced alone: BSM aiming fails, âÂÂBSM OFF" indicator ON, Center Display warning message, BSM failsafe (No operation), DTC U3000:54 stored in memory, DTC U1A4B:54 stored in memory (CX-3, MX-5 only).
Associated Products (2)Associated Documents - March 27, 2019•Document ID: 10155442Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-001-19a
- Date Added:
- March 29, 2019
- Manufacturer:
- MAZDA
SummaryAPPLE CARPLAY⢠/ ANDROID AUTO⢠FREQUENTLY ASKED QUESTIONS (FAQ). Many frequently asked question and the answers.
Associated Products (25)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-52016 Mazda CX-9+ 5 moreAssociated Documents - March 27, 2019•Document ID: 10155437Service Bulletin/Repair InstructionsPOWER TRAIN:AXLE ASSEMBLY; POWER TRAIN
- Mfr Comm. #:
- 05-002-19-3576
- Date Added:
- March 29, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain of a whining noise from the automatic transaxle when driving at 10 mph and above. The noise: ï·Depends on the vehicleâÂÂs speed only (the more speed, the more noise)ï·Occurs with all types of driving (acceleration, deceleration, steady speed)ï·Does not depend on rpm, gear, or ATF temperature.This is caused by a damaged bearing in the transaxle due to improper configuration of the transaxle case. A modification has now been implemented on automatic transaxles with the following serial numbers: ï·7TN0820364 and higher (CX-3) / 8TN1090104 and higher (except CX-3) ï·8TR1008883 and higher ï·8TD1003276 and higher ï·8T50331192 and higher (CX-3) / 8T50329705 and higher (except CX-3).
Associated Products (23)2019 Mazda CX-32019 Mazda CX-52018 Mazda CX-32018 Mazda CX-52018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda Mazda32017 Mazda Mazda62016 Mazda CX-32016 Mazda CX-52016 Mazda Mazda32016 Mazda Mazda62015 Mazda CX-52015 Mazda Mazda32015 Mazda Mazda62014 Mazda CX-52014 Mazda Mazda32014 Mazda Mazda6+ 3 moreAssociated Documents - March 22, 2019•Document ID: 10155440Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; FORWARD COLLISION AVOIDANCE; SERVICE BRAKES, HYDRAULIC; LANE DEPARTURE; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 15-002-19-3542a
- Date Added:
- March 29, 2019
- Manufacturer:
- MAZDA
SummarySome customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction).Master Warning Light, Smart Brake Support/Smart City Brake Support (SBS/SCBS) Indicator Light, Lane-keep Assist System (LAS) Lane Departure Warning System (LDWS) Warning Light, High Beam Control (HBC) system Warning Light (amber). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by a hardware failure of an internal device of the FSC, which results in a malfunction detection. To eliminate this concern, the production process of the FSC has been modified.
Associated Products (8)Associated Documents - March 22, 2019•Document ID: 10155436Service Bulletin/Repair InstructionsPOWER TRAIN:DRIVELINE:DRIVESHAFT
- Mfr Comm. #:
- 03-001-19-3505b
- Date Added:
- March 29, 2019
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a squeak noise from the right front driveshaft at the automatic transaxle when driving. This concern is likely to occur when driving at speeds between 37-50 mph (60-80 km/h) with the ATF at normal operating temperature. The noise is caused by stick/slip between the oil seal at the transaxle and the dust cover of the driveshaft. To correct this issue, the thickness of the dust cover has been increased.
Associated Products (22)2019 Mazda CX-32018 Mazda CX-32018 Mazda CX-52018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda Mazda32017 Mazda Mazda62016 Mazda CX-32016 Mazda CX-52016 Mazda Mazda32016 Mazda Mazda62015 Mazda CX-52015 Mazda Mazda32015 Mazda Mazda62014 Mazda CX-52014 Mazda Mazda32014 Mazda Mazda62013 Mazda CX-5+ 2 moreAssociated Documents - March 20, 2019•Document ID: 10154879Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE; EQUIPMENT
- Mfr Comm. #:
- 00-003-19-3583
- Date Added:
- March 21, 2019
- Manufacturer:
- MAZDA
SummaryIn support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
Associated Products (160)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 140 moreAssociated Documents - March 15, 2019•Document ID: 10154529Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING:TAIL LIGHTS; EXTERIOR LIGHTING
- Mfr Comm. #:
- 09-003-19-3555a
- Date Added:
- March 20, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will typically clear during warmer ambient temperatures, or when the lights have been on for some time.
Associated Products (96)2019 Mazda CX-32019 Mazda CX-52019 Mazda CX-92019 Mazda Mazda32019 Mazda Mazda62019 Mazda MX-52018 Mazda CX-32018 Mazda CX-52018 Mazda CX-92018 Mazda Mazda32018 Mazda Mazda62018 Mazda MX-52017 Mazda CX-32017 Mazda CX-52017 Mazda CX-92017 Mazda Mazda32017 Mazda Mazda62017 Mazda MX-52016 Mazda CX-32016 Mazda CX-5+ 76 moreAssociated Documents - March 14, 2019•Document ID: 10154531Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES
- Mfr Comm. #:
- 09-013-19-3580
- Date Added:
- March 20, 2019
- Manufacturer:
- MAZDA
SummaryOn certain subject vehicles, it is possible that the panic alarm system may activate while driving, and the horn may sound intermittently and hazard warning lights may flash. The panic alarm concern will stop after cycling the ignition switch off, then on again. No DTCs are stored. Some TPMS wheel sensor IDs on the concerned vehicle or other vehicles nearby may cause the error in the body control module (BCM). Air pressure data transmitted from the wheel sensors may be recognized by the BCM as if the panic button on the remote transmitter has been pressed.
Associated Products (3)Associated Documents - March 14, 2019•Document ID: 10154528Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES
- Mfr Comm. #:
- MSP53
- Date Added:
- March 20, 2019
- Manufacturer:
- MAZDA
SummarySubject: Mazda Service Program (MSP) 53. 2019 CX-3 & 2018-2019 MX-5 With Direct Tire Pressure Monitoring System (TPMS) Panic Alarm System Activates While Driving. Mazda Motor Corporation has decided to conduct a Mazda Service Program (MSP) on certain 2019 CX-3 vehicles produced from February 27, 2018 through October 12, 2018 and 2018-2019 MX-5 vehicles produced from October 3, 2017 through October 15, 2018. On certain subject vehicles equipped with Direct TPMS (TPMS wheel sensor is directly mounted on each wheel), it is possible that the panic alarm system may activate while driving, and the horn may sound intermittently, and hazard warning lights may flash. The panic alarm concern will stop after cycling the ignition switch off, then on again. No DTCs are stored. Action Required: Beginning today, reprogram the body control module (BCM) to the latest calibration using MMDS for all affected CX-3 and MX-5 vehicles in dealer inventory, and when customers bring their vehicles for maintenance, or other service/warranty work. The subject vehicles must not be delivered to customers until the repair of MSP53 is completed. Please inform the customer that the BCM will be reprogrammed to the latest calibration, free of charge. If a vehicle is sold with an open MSP53 your Step 3 PDI warranty claim will be subject to debit.
Associated Products (3)Associated Documents - March 11, 2019•Document ID: 10154487Service Bulletin/Repair InstructionsSEATS; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- MT-001-19
- Date Added:
- March 20, 2019
- Manufacturer:
- MAZDA
SummarySome customers may complain about a tapping or knocking noise coming from the rear seat after fuel fill. The concern will likely occur if the fuel tank is overfilled (more fuel is added after the fuel pump nozzle shuts off automatically) or filled up normally in high ambient temperatures and the fuel expands.
Associated Products (4)Associated Documents - February 8, 2019•Document ID: 10154448Service Bulletin/Repair InstructionsENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- 01-008-19-3568
- Date Added:
- March 11, 2019
- Manufacturer:
- MAZDA
SummarySome customer using "Flexible" setting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.
Associated Products (9)Associated Documents - February 5, 2019•Document ID: 10154452Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 09-010-19-3577
- Date Added:
- March 11, 2019
- Manufacturer:
- MAZDA
SummarySome customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection.
Associated Products (23)2019 Mazda CX-32018 Mazda CX-32018 Mazda CX-52018 Mazda Mazda22018 Mazda Mazda32018 Mazda Mazda62017 Mazda CX-32017 Mazda CX-52017 Mazda Mazda22017 Mazda Mazda32017 Mazda Mazda62016 Mazda CX-32016 Mazda CX-52016 Mazda Mazda22016 Mazda Mazda32016 Mazda Mazda62015 Mazda CX-52015 Mazda Mazda32015 Mazda Mazda62014 Mazda CX-5+ 3 moreAssociated Documents