Kia Stinger Service Bulletins
154 manufacturer communications on file.
- April 24, 2019•Document ID: 10159241Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBELE162_R1
- Date Added:
- April 30, 2019
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: UVO 3.0 LOGIC IMPROVEMENT FOR BLACK SCREEN (SA366) - This bulletin provides the procedure to improve the logic of the UVO 3.0 (D-Audio) head unit on some 2018MY Stinger (CK) vehicles, produced from May 3, 2018 through June 5, 2018, and 2018-2019MY Niro Plug-in (DE PHEV) vehicles, produced from June 4, 2018 through November 25, 2018, which may exhibit a black screen after confirming the safety warning.
Associated Products (3)Associated Documents - April 16, 2019•Document ID: 10159245Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSBENG178_R2
- Date Added:
- May 8, 2019
- Manufacturer:
- KIA
SummaryTSB: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC18) - This bulletin provides information related to extracting "in use performance tracking" emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.
Associated Products (11)Associated Documents - April 8, 2019•Document ID: 10159237Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- PS589
- Date Added:
- April 30, 2019
- Manufacturer:
- KIA
SummaryPITSTOP: KDS COOLING FAN ACTUATION TEST - This Pitstop provides information regarding the KDS Cooling Fan Actuation Test which is only available for 2019MY~ Stinger (CK) vehicles. A screenshot of the Cooling Fan Actuation Test for a 2018MY Stinger (CK) is shown below for reference with a result of "Operation Command Failed(0x22)" (or a possible result of "Operation Command Sent") when the actuation was attempted. This is a normal operation of KDS as this actuation test is not supported for 2018MY Stinger (CK) and therefore does not require any further diagnosis or repair of the KDS or cooling fan circuit.
Associated Products (2)Associated Documents - March 22, 2019•Document ID: 10157045Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- PS573_R1
- Date Added:
- April 8, 2019
- Manufacturer:
- KIA
SummaryPITSTOP: SOUND SETTINGS (FADER) MOVES TO REAR - This bulletin has been revised to include additional information. This Pitstop provides information related to sound settings (fader) which may alter the default sound position settings.
Associated Products (2)Associated Documents - March 22, 2019•Document ID: 10155380Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- PS573_R1
- Date Added:
- April 6, 2019
- Manufacturer:
- KIA
SummaryPITSTOP: SOUND SETTINGS (FADER) MOVES TO REAR - This bulletin has been revised to include additional information. This Pitstop provides information related to sound settings (fader) which may alter the default sound position settings.
Associated Products (2)Associated Documents - February 21, 2019•Document ID: 10154689Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM; EQUIPMENT
- Mfr Comm. #:
- TSBENG197
- Date Added:
- March 18, 2019
- Manufacturer:
- KIA
SummaryTSB: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC19) - This bulletin provides information related to extracting ?in use performance tracking? emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.
Associated Products (10)Associated Documents - February 20, 2019•Document ID: 10154688Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- TSBENG191_R2
- Date Added:
- March 18, 2019
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: 2.0T ECU REPLACEMENT FOR DTC P053F AND/OR P0087 (SA352) - This bulletin provides the procedure to replace the Electronic Control Unit (ECU) on ALL 2018MY Stinger (CK) 2.0T vehicles, produced from September 29, 2017 through March 27, 2018, which may exhibit engine hesitation and/or a Malfunction Indicator Light (MIL) ON with DTCs P053F and/or P0087 as the engine is warming up to operating temperature.
Associated Products (1)Associated Documents - January 30, 2019•Document ID: 10152917Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSBTRA074_R2
- Date Added:
- February 19, 2019
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: THETA 2.0L TURBO ATF WARMER CONNECTOR REPLACEMENT (SA333) - This bulletin has been revised to include additional information. This bulletin provides the procedure to replace the Automatic Transmission Fluid (ATF) warmer connector on some 2018MY Stinger (CK) vehicles, equipped with the Theta 2.0L Turbo engine and produced from September 9, 2017 through January 4, 2018, which may exhibit a coolant fluid leakage between the ATF connector and engine side heater pipe.
Associated Products (1)Associated Documents - January 25, 2019•Document ID: 10152921Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- VSC166_TSB_R1
- Date Added:
- February 19, 2019
- Manufacturer:
- KIA
SummaryVOLUNTARY SERVICE CAMPAIGN: SUNSET YELLOW (S7Y) BODY REPAINT (SC166) - This bulletin has been revised to include additional information. Kia Motors America, Inc. is conducting a Voluntary Service Campaign on 2018MY Sunset Yellow (color code: S7Y) Stinger (CK) vehicles, produced from December 4, 2017 through January 17, 2018. An error occurred during the factory paint process of Sunset Yellow Stinger vehicles affecting paint adherence that may result in some paint chipping on certain affected areas. The affected areas include the exterior metal panels such as the hood, doors, windshield pillars, and tail gate (partial). Those affected areas will be repainted.
Associated Products (1)Associated Documents - January 18, 2019•Document ID: 10152915Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- TSBENG083_R1
- Date Added:
- February 19, 2019
- Manufacturer:
- KIA
SummaryTSB: SPECIAL SERVICE INFORMATION & SPECIFICATIONS FOR GDI HIGH PRESSURE FUEL SYSTEM - This bulletin has been revised to include additional information. This bulletin provides information relating to all Kia vehicles equipped with Gasoline Direct Injection (GDI) engines. In these engines highly pressurized gasoline is injected via a common fuel rail and injectors that deliver fuel directly into the combustion chamber of each cylinder. In comparison, in a conventional Multi-Point Fuel Injection (MPI) engine, the gasoline is injected into the intake port of each cylinder at a relatively low pressure. Due to high fuel pressure in a GDI system, servicing the GDI system requires special attention and handling procedures. This bulletin provides special service information and specifications for the GDI fuel system components.
Associated Products (70)2019 Kia Cadenza2019 Kia K9002019 Kia Niro2019 Kia Optima2019 Kia Rio2019 Kia Sorento2019 Kia Soul2019 Kia Sportage2019 Kia Stinger2018 Kia Cadenza2018 Kia Forte2018 Kia K9002018 Kia Niro2018 Kia Optima2018 Kia Rio2018 Kia Sedona2018 Kia Sorento2018 Kia Soul2018 Kia Sportage2018 Kia Stinger+ 50 moreAssociated Documents - December 17, 2018•Document ID: 10152900Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBELE162
- Date Added:
- February 19, 2019
- Manufacturer:
- KIA
SummaryTSB - SERVICE ACTION: UVO 3.0 LOGIC IMPROVEMENT FOR BLACK SCREEN (SA366) - This bulletin provides the procedure to improve the logic of the UVO 3.0 (D-Audio) head unit on some 2018MY Stinger (CK) vehicles, produced from May 3, 2018 through June 5, 2018, and 2018-2019MY Niro Plug-in (DE PHEV) vehicles, produced from June 4, 2018 through November 25, 2018, which may exhibit a black screen after confirming the safety warning. Follow the procedure below to improve the logic of the UVO 3.0 head unit.
Associated Products (3)Associated Documents - November 15, 2018•Document ID: 10151907Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- TSBENG182_CLOSED
- Date Added:
- December 17, 2018
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: EMISSIONS LABEL REPLACEMENT (ENG182/SA324) - CLOSED. REFER TO TSB SC152
Associated Products (1)Associated Documents - November 12, 2018•Document ID: 10151909Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBENG191_R1
- Date Added:
- December 17, 2018
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: 2.0T ECU REPLACEMENT FOR DTC P053F AND/OR P0087 (SA352) - This bulletin has been revised to include additional information. This bulletin provides the procedure to replace the Electronic Control Unit (ECU) on ALL 2018MY Stinger (CK) 2.0T vehicles, produced from September 29, 2017 through March 27, 2018, which may exhibit engine hesitation and/or a Malfunction Indicator Light (MIL) ON with DTCs P053F and/or P0087 as the engine is warming up to operating temperature.
Associated Products (1)Associated Documents - November 5, 2018•Document ID: 10151908Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSBENG191
- Date Added:
- December 17, 2018
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: 2.0T ECU REPLACEMENT FOR DTC P053F AND/OR P0087 (SA352) - This bulletin provides the procedure to replace the Electronic Control Unit (ECU) on some 2018MY Stinger (CK) 2.0T vehicles, produced from September 29, 2017 through March 27, 2018, which may exhibit engine hesitation and/or a Malfunction Indicator Light (MIL) ON with DTCs P053F and/or P0087 as the engine is warming up to operating temperature.
Associated Products (1)Associated Documents - September 19, 2018•Document ID: 10145150Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD; VISIBILITY:WINDSHIELD WIPER/WASHER
- Mfr Comm. #:
- PS299_R3
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryPITSTOP - CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - When servicing the windshield wipers on the listed vehicles below during PDI, make sure to use the procedure outlined below to raise the wiper arms to the fully vertical position in order to avoid damaging the paint on the rear edge of the hood. It is important to note that the wipers on these vehicles are recessed under the hood to provide better appearance and reduced wind noise characteristics. This procedure applies to both key start and SMK type ignition systems.
Associated Products (15)Associated Documents - September 17, 2018•Document ID: 10145162Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- VSC152_OWNER_CK
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryEMISSIONS SERVICE CAMPAIGN (SC152) - OWNER LETTER - Dear Kia Stinger Owner: Kia Motors America, Inc. is conducting a Voluntary Emissions Service Campaign to replace the Vehicle Emission Control Information (VECI) Label on some 2018 MY Kia Stinger vehicles.
Associated Products (1)Associated Documents - September 6, 2018•Document ID: 10145164Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- VSC152_QA
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryQUESTIONS AND ANSWERS - SC152 ? VEHICLE EMISSION CONTROL (VECI) LABEL REPLACEMENT VOLUNTARY EMISSIONS SERVICE CAMPAIGN
Associated Products (4)Associated Documents - September 6, 2018•Document ID: 10145161Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
- Mfr Comm. #:
- VSC152_DSM
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryEMISSIONS SERVICE CAMPAIGN (SC152) - DEALER PARTS AND SERVICE MANAGER LETTER - Kia Motors America, Inc. is conducting a Voluntary Emissions Service Campaign to replace the Vehicle Emission Control Information (VECI) Label on all 2015, 2016, and some 2017 MY Optima Hybrid vehicles produced from July 24, 2014 through June 12, 2017, and on some 2018 MY Stinger rear-wheel drive (RWD) and all-wheel drive (AWD) vehicles equipped with Theta 2.0-T engines, produced from September 29, 2017 through November 20, 2017. An incorrect VECI label was installed during the production of these vehicles. The VECI label is extremely important when performing maintenance, emissions inspection, or ordering engine and engine management related parts. It also contains the code that tells a testing facility which test to perform to ensure the vehicle is tested to the correct emission standard.
Associated Products (4)Associated Documents - September 6, 2018•Document ID: 10145160Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; EQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- VSC152_DP
- Date Added:
- October 9, 2018
- Manufacturer:
- KIA
SummaryEMISSIONS SERVICE CAMPAIGN (SC152) - DEALER PRINCIPAL LETTER - Kia Motors America, Inc. is conducting a Voluntary Emissions Service Campaign to replace the Vehicle Emission Control Information (VECI) Label on all 2015, 2016, and some 2017 MY Optima Hybrid vehicles produced from July 24, 2014 through June 12, 2017, and on some 2018 MY Stinger rear-wheel drive (RWD) and all-wheel drive (AWD) vehicles equipped with Theta 2.0-T engines, produced from September 29, 2017 through November 20, 2017. An incorrect VECI label was installed during the production of these vehicles. The VECI label is extremely important when performing maintenance, emissions inspection, or ordering engine and engine management related parts. It also contains the code that tells a testing facility which test to perform to ensure the vehicle is tested to the correct emission standard.
Associated Products (4)Associated Documents - August 16, 2018•Document ID: 10144236Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSBTRA077_R1
- Date Added:
- September 10, 2018
- Manufacturer:
- KIA
SummaryTSB: SERVICE ACTION: FAST STATIC GEAR SHIFT LOGIC IMPROVEMENT (SA341) - This bulletin has been revised to include additional information. This bulletin provides the procedure to improve the logic of the Transmission Control Unit (TCU) on some 2018MY Stinger (CK) 2.0T & 3.3T vehicles, equipped with Shift-by-Cable (SBC) and produced from September 29, 2017 through February 7, 2018. These vehicles may experience improper 1st gear engagement when moving the shifter in a fast or abrupt manner from "Park" to "Sport Mode". To correct this condition, apply the improved logic to the TCU using the KDS ECU Upgrade function as described in this bulletin.
Associated Products (1)Associated Documents