Infiniti QX60 Service Bulletins (2017)
214 manufacturer communications on file.
- December 17, 2019•Document ID: 10170018Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- P9329_P9344_P934
- Date Added:
- January 9, 2020
- Manufacturer:
- INFINITI
SummaryEngine Control Module (ECM) Reprogram California Voluntary Emission Service Campaign ***** Campaign Summary ***** INFINITI is conducting a Voluntary Emissions Service Campaign on approximately 49,497 specific INFINITI vehicles identified in Service Comm and currently registered to owners in the state of California to reprogram the Engine Control Module (ECM) in the event that a permanent diagnostic trouble code (P-DTC) for P0448, P0101, P2008, or P0087 is recorded in the ECM. Due to calibration errors on the affected vehicles, the ECM may improperly store a permanent diagnostic trouble code (P-DTC) even though the emissions on-board diagnostic system is functioning properly. As of July 1, 2019 the State of California has implemented a revised Inspection Maintenance (I/M) or âSmog Checkâ test program. Without the software update, the subject vehicles may not pass this Smog Check test in those areas of California where such testing is required under state law. This incident has no effect on the safety, performance, drivability, or fuel consumption of the applicable vehicles. ***** What Retailers Should Do ***** 1. Verify if vehicles are affected by this Voluntary Emissions Service Campaign using Service Comm or DBS National Service History â Open Campaign I.D. ï· P9329 â Affected Model Year 2015 ï· P9344 â Affected Model Year 2016 ï· P9346 â Affected Model Year 2017 ï· P9348 â Affected Model Year 2018 ï· P9350 â Affected Model Year 2019 2. Retailers are requested to repair any affected vehicles in retailer new or pre-owned inventory to ensure client satisfaction. ï· - New vehicles in retailer inventory can also be identified DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§ - Refer to IPSB 15-286 for additional information 3. Retailers should use ITB19-043 to correct any vehicles subject to this campaign.
Associated Products (12)Associated Documents - December 16, 2019•Document ID: 10170000Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- ITB19-043
- Date Added:
- January 9, 2020
- Manufacturer:
- INFINITI
SummaryVOLUNTARY EMISSIONS SERVICE CAMPAIGN VEHICLES REGISTERED IN CALIFORNIA; ENGINE CONTROL MODULE INTRODUCTION Infiniti is conducting this voluntary emissions service campaign on certain specific model year Infiniti vehicles (see APPLIED VEHICLES) registered in the state of California. The engine control module (ECM) will be inspected, and reprogrammed if it applies. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Infiniti has assigned identification numbers P9329, P9344, P9346, P9348, and P9350 to this campaign. The correct number must appear on all communication and documentation of any nature dealing with this campaign. RETAILER RESPONSIBILITY Retailers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a retailerâs inventory.
Associated Products (12)Associated Documents - October 31, 2019•Document ID: 10167281Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- ITB15-010d
- Date Added:
- November 7, 2019
- Manufacturer:
- INFINITI
SummaryINFINITI; PROCEDURE TO CLEAN CVT TRANSMISSION FLUID COOLERS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (7)Associated Documents - October 22, 2019•Document ID: 10167283Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- ITB16-035b
- Date Added:
- November 7, 2019
- Manufacturer:
- INFINITI
Summary2015-2017 QX60; ENHANCED DIAGNOSTIC LOGIC FOR CVT This bulletin has been superseded by ITB15-012. Please discard previous versions of this bulletin.
Associated Products (3)Associated Documents - October 22, 2019•Document ID: 10167282Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- ITB15-012h
- Date Added:
- November 7, 2019
- Manufacturer:
- INFINITI
Summary2013 JX35 AND 2014 â 2018 QX60; CVT JUDDER AND DTC P17F0 OR P17F1 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Associated Products (6)Associated Documents - October 8, 2019•Document ID: 10167279Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB12-011o
- Date Added:
- November 7, 2019
- Manufacturer:
- INFINITI
SummaryTELEMATICS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (36)2020 Infiniti QX602019 Infiniti Q502019 Infiniti Q602019 Infiniti Q702019 Infiniti QX302019 Infiniti QX502019 Infiniti QX602019 Infiniti QX802018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX602017 Infiniti QX80+ 16 moreAssociated Documents - September 19, 2019•Document ID: 10165756Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB19-027
- Date Added:
- October 8, 2019
- Manufacturer:
- INFINITI
SummaryMIL ON WITH DTC P0087, P0101, P0448, OR P2008 IF YOU CONFIRM An applied vehicle has one or more DTCs stored, shown in Table A on page 2, AND The ECM part number is shown in Table B, starting on page 3. ACTION 1. First perform the appropriate diagnostic procedure for the stored DTC to repair the vehicle according to the Electronic Service Manual (ESM). 2. Reprogram the ECM after performing the diagnosis and repair. ï· -The ECM reprogram in this Service Procedure is not a repair for the DTC, but instead updates the way the permanent DTC is stored and allowed to be erased. The DTC must be properly diagnosed and repaired before the reprogram is applied.
Associated Products (12)Associated Documents - September 16, 2019•Document ID: 10165734Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- ITB19-025
- Date Added:
- October 8, 2019
- Manufacturer:
- INFINITI
SummaryQX60; TRANSMISSION RANGE SWITCH SERVICE INFORMATION SERVICE INFORMATION The transmission range switch is now available as a separate service part. If the transmission range switch is being replaced for any reason, it must be adjusted after its replacement. ï· - Refer to SERVICE PROCEDURE on page 3 for transmission range switch removal, installation, and adjustment.
Associated Products (6)Associated Documents - September 12, 2019•Document ID: 10165750Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; AIR BAGS; SEATS
- Mfr Comm. #:
- ITB19-024
- Date Added:
- October 8, 2019
- Manufacturer:
- INFINITI
SummaryDTC B00A0-00 STORED IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored And OCS zero point reset cannot be performed And The following screen will display: ACTION 1. Check the Occupant Classification System (OCS) control unit using the ODS Analysis tool software. ï· Refer to SERVICE PROCEDURE on the next page. HINT: âOCSâ may also be referred to as âODSâ. 2. Perform â75-zero RESETâ.
Associated Products (37)2020 Infiniti QX502020 Infiniti QX602019 Infiniti Q502019 Infiniti Q602019 Infiniti QX502019 Infiniti QX602019 Infiniti QX802018 Infiniti Q502018 Infiniti Q602018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti QX602017 Infiniti QX702017 Infiniti QX802016 Infiniti Q502016 Infiniti QX602016 Infiniti QX702016 Infiniti QX80+ 17 moreAssociated Documents - September 6, 2019•Document ID: 10165747Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT
- Mfr Comm. #:
- ITB18-040c
- Date Added:
- October 8, 2019
- Manufacturer:
- INFINITI
SummarySOFTWARE UPDATES FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Associated Products (11)Associated Documents - August 27, 2019•Document ID: 10164645Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB19-022
- Date Added:
- September 10, 2019
- Manufacturer:
- INFINITI
Summary2017-2019 QX60; MIL ON WITH DTC P0087 STORED IF YOU CONFIRM The Malfunction Indicator Light (MIL) is ON with Diagnostic Trouble Code (DTC) P0087 (FRP CONTROL SYSTEM) stored in the Engine Control Module (ECM), AND The fuel level indicates ¼ or less. ACTION Reprogram the ECM, if applicable.
Associated Products (3)Associated Documents - August 13, 2019•Document ID: 10164637Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- ITB14-011d
- Date Added:
- October 9, 2019
- Manufacturer:
- INFINITI
SummaryREMOTE ENGINE START NOT WORKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (23)2020 Infiniti QX602019 Infiniti Q502019 Infiniti Q602019 Infiniti QX502019 Infiniti QX602019 Infiniti QX802018 Infiniti Q502018 Infiniti Q602018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti QX602017 Infiniti QX802016 Infiniti Q502016 Infiniti QX602016 Infiniti QX802015 Infiniti QX602015 Infiniti QX802014 Infiniti QX60+ 3 moreAssociated Documents - July 26, 2019•Document ID: 10163937Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13-026J
- Date Added:
- August 19, 2019
- Manufacturer:
- INFINITI
Summary2014-2017 INFINITI; DISPLAY CONTROL UNIT REPLACEMENT This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (7)Associated Documents - June 24, 2019•Document ID: 10162969Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- ITB12-011n
- Date Added:
- July 22, 2019
- Manufacturer:
- INFINITI
SummaryTELEMATICS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (35)2019 Infiniti Q502019 Infiniti Q602019 Infiniti Q702019 Infiniti QX302019 Infiniti QX502019 Infiniti QX602019 Infiniti QX802018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX602017 Infiniti QX802016 Infiniti Q50+ 15 moreAssociated Documents - June 13, 2019•Document ID: 10162972Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- ITB19-014
- Date Added:
- July 22, 2019
- Manufacturer:
- INFINITI
Summary2013 JX35 AND 2014-2020 QX60; REMOVAL OF HEADLIGHT ASSEMBLY LOCATING BRACKET SERVICE INFORMATION If replacement of a Front Combination Headlamp assembly (headlight assembly) is necessary, for the applied vehicles, the locating bracket (if present) on the new replacement headlight assembly must first be removed before installation. Inspect the new replacement headlight assembly and confirm if a locating bracket is attached, with a Torx screw, on top in the center (see Figure 1). Is a locating bracket present? - NO: This bulletin does not apply. Continue with the installation of the new replacement headlight assembly. - YES 1. Using a T10 Torx screwdriver, remove the locating bracket attached to the topcenter of the replacement headlight assembly (see Figure 1). 2. Discard the locating bracket and Torx screw. 3. Continue the installation of the replacement headlight assembly. NOTE: Refer to the Electronic Service Manual (ESM) for the procedure to remove or install a headlight assembly. CAUTION: Take care when installing the headlight assembly so that the painted surface of the fender is not damaged. - Black electrical tape can be used to protect the edge of the fender while installing the headlight assembly.
Associated Products (7)Associated Documents - June 4, 2019•Document ID: 10162971Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB14-053b
- Date Added:
- July 22, 2019
- Manufacturer:
- INFINITI
SummaryABNORMAL NOISE FROM FRONT ENGINE MOUNT This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Associated Products (7)Associated Documents - May 22, 2019•Document ID: 10161388Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: CAMERA; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- ITB19-013
- Date Added:
- June 24, 2019
- Manufacturer:
- INFINITI
SummaryAEB WARNING LIGHT BLINKING This bulletin applies only to vehicles equipped with a lane camera. SERVICE INFORMATION If the AEB warning light is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: - When contamination or foreign material adhere to the lane camera viewing window on the windshield - When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield - When the lane camera viewing window on the windshield is temporarily fogged up NOTE: - If DTCs are present in any of the following related systems: - Laser/Radar, - ICC/ADAS, or - Lane Camera, Refer to the related Electronic Service Manual (ESM) for diagnosis. - Refer to the following pages for further information.
Associated Products (21)2019 Infiniti Q502019 Infiniti Q702019 Infiniti QX502019 Infiniti QX602019 Infiniti QX802018 Infiniti Q502018 Infiniti Q702018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q702017 Infiniti QX602017 Infiniti QX802016 Infiniti Q502016 Infiniti Q702016 Infiniti QX602016 Infiniti QX802015 Infiniti Q502015 Infiniti Q702015 Infiniti QX60+ 1 moreAssociated Documents - May 13, 2019•Document ID: 10161386Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB19-011
- Date Added:
- June 24, 2019
- Manufacturer:
- INFINITI
SummaryDEAD PEDAL REPLACEMENT SERVICE INFORMATION If the dead pedal needs to be replaced for anyreason, it is no longer necessary to replace the front floor trim (carpet). The dead pedal is now available as a service part. NOTE: Do not replace the carpet if only the dead pedal is needed. ACTION Follow the SERVICE PROCEDURE on the next page to replace ONLY the dead pedal. NOTE: Dead pedal is listed in PARTS INFORMATION on the last page.
Associated Products (7)Associated Documents - April 4, 2019•Document ID: 10160178Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
- Mfr Comm. #:
- ITB19-010
- Date Added:
- May 20, 2019
- Manufacturer:
- INFINITI
Summary2016-2018 QX60; MIL ON WITH DTC P2097, P2099, P0171 AND/OR P0174 This bulletin applies only to vehicles equipped with the VQ35DE engine only. IF YOU CONFIRM The MIL is ON with one or more of the following Air/Fuel (A/F) Sensor DTCs stored: - P0171 (Fuel Injection System Function) - P0174 (Fuel Injection System Function) - P2097 (A/F SENSOR 1) - P2099 (A/F SENSOR 1) ACTION 1. Perform the appropriate diagnostic procedure outlined in the Electronic Service Manual (ESM). 2. Refer to Table A on the next page to confirm if Electronic Control Module (ECM) reprogramming is needed.
Associated Products (3)Associated Documents - April 2, 2019•Document ID: 10160176Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB19-008
- Date Added:
- May 20, 2019
- Manufacturer:
- INFINITI
SummaryEXTERIOR CLEANING INFORMATION SERVICE INFORMATION When cleaning the exterior of an Infiniti vehicle, damage may occur when using a cleaner with too high of an alkaline concentration. - Always refer to the Appearance and care section of the related owner?s manual. - Not all cleaners are created equal. - Many cleaners come in concentrated form. - Alkaline cleaners (cleaners with a high pH value) can cause spots on paint and trim when not used as directed. - Some commercial car washes use cleaners with a high pH value. - When using cleaners that meet the conditions defined in the Appearance and care section, be sure to carefully follow the cleaner?s directions. - When finished cleaning/washing, rinse thoroughly with clean water. IMPORTANT: Damage to paint, glass, bright metal, or any other exterior surface caused by using improper cleaning products is not covered under warranty. Always refer to the Paint Incident Identification Manual (PIIM) and Assurance Products Reference Manual (APRM). Follow the guidelines in the PIIM and APRM for non-warrantable exterior body, glass, or painted surface quality issues. To access the PIIM and APRM, login to nnanet.com: - For the PIIM, select: MY LINKS > Warranty > Paint Incident Identification Manual - For the APRM, select: MY DOCUMENTS > Warranty > APRM See further information in this bulletin.
Associated Products (221)2019 Infiniti Q502019 Infiniti Q602019 Infiniti Q702019 Infiniti QX302019 Infiniti QX502019 Infiniti QX602019 Infiniti QX802018 Infiniti Q502018 Infiniti Q602018 Infiniti Q702018 Infiniti QX302018 Infiniti QX502018 Infiniti QX602018 Infiniti QX802017 Infiniti Q502017 Infiniti Q602017 Infiniti Q702017 Infiniti QX302017 Infiniti QX502017 Infiniti QX60+ 201 moreAssociated Documents