Infiniti G37 Service Bulletins
180 manufacturer communications on file.
- November 15, 2013•Document ID: 10053951Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- ITB-13-044
- Date Added:
- December 7, 2013
- Manufacturer:
- INFINITI
SummaryINFINITI: THE INSTRUMENT CLUSTER HAS A WARNING INDICATOR, THAT ILLUMINATES, OF A LOOSE FUEL FILL CAP. MODEL YEARS 2012 AND UP. NO MODELS LISTED. *PE
Associated Products (18)2014 Infiniti Q502014 Infiniti QX602014 Infiniti QX802013 Infiniti FX352013 Infiniti FX502013 Infiniti JX352013 Infiniti M352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti FX352012 Infiniti FX502012 Infiniti G252012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX56Associated Documents - November 15, 2013•Document ID: 10053950Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- ITB-09-012-F
- Date Added:
- December 7, 2013
- Manufacturer:
- INFINITI
SummaryINFINITI: DUE TO A LOOSE FUEL FILL CAP, THE EVAP LEAK DTCS (P0442, P0455, P0456) ARE STORED AND MAY BE THE CAUSE. MODEL YEARS 2007-2011. NO MODELS LISTED. *PE
Associated Products (42)2011 Infiniti EX352011 Infiniti FX352011 Infiniti FX502011 Infiniti G252011 Infiniti G372011 Infiniti M372011 Infiniti M562011 Infiniti QX562010 Infiniti EX352010 Infiniti FX352010 Infiniti FX502010 Infiniti G372010 Infiniti M352010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti FX352009 Infiniti FX502009 Infiniti G352009 Infiniti G37+ 22 moreAssociated Documents - November 12, 2013•Document ID: 10192263Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB12063C
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM The customer reports that people on the other end of a phone call cannot hear them. Customer report may include: Voice is choppy or cuts-out, voice sounds distant, voice sounds as if speaking through a tunnel, and/or voice sounds like it's under water. ACTION 1. Reprogram (reconfigure) the Multi AV. 2. Replace the microphone and the map lamp finisher. See this bulletin for further detail.
Associated Products (22)2013 Infiniti FX372013 Infiniti FX502013 Infiniti M372012 Infiniti EX352012 Infiniti FX352012 Infiniti FX372012 Infiniti FX502012 Infiniti G372012 Infiniti M372012 Infiniti QX562011 Infiniti EX352011 Infiniti FX352011 Infiniti FX372011 Infiniti FX502011 Infiniti G372011 Infiniti M372011 Infiniti QX562010 Infiniti EX352010 Infiniti FX352010 Infiniti FX37+ 2 moreAssociated Documents - November 12, 2013•Document ID: 10192262Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB12062C
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM The customer reports that people on the other end of a phone call cannot hear them. Customer report may include: Voice is choppy or cuts-out, voice sounds distant, voice sounds as if speaking through a tunnel, and/or voice sounds like it's under water. ACTION 1. Replace the TEL Adaptor Unit. 2. Replace the microphone and the map lamp finisher. See this bulletin for further detail.
Associated Products (18)2013 Infiniti M452012 Infiniti EX352012 Infiniti FX352012 Infiniti FX372012 Infiniti FX502012 Infiniti G372012 Infiniti M452011 Infiniti EX352011 Infiniti FX352011 Infiniti FX372011 Infiniti FX502011 Infiniti G372011 Infiniti M452010 Infiniti EX352010 Infiniti FX352010 Infiniti FX372010 Infiniti FX502010 Infiniti G37Associated Documents - September 26, 2013•Document ID: 10054302Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- ITB-13-039
- Date Added:
- January 9, 2014
- Manufacturer:
- INFINITI
SummaryINFINITI: SERVICE BULLETIN CONCERNING LOW TIRE PRESSURE WARNING SYSTEM INFORMATION. *JS
Associated Products (34)2014 Infiniti Q502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti FX352013 Infiniti FX502013 Infiniti JX352013 Infiniti M352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti FX352012 Infiniti FX502012 Infiniti G252012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX562011 Infiniti EX35+ 14 moreAssociated Documents - September 3, 2013•Document ID: 10192238Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- ITB07047D
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Scratch Shield is a scratch-resistant clear coat which "heals" by itself when the vehicle gets a small scratch in the clear coat. If the scratch reaches the color base coat, however, it will not "heal". Scratch Shield was implemented for the first time in the U.S. with the 2008 EX35. NOTE: Scratch Shield is applied to body panels and fasicas only. Scratch Shield Label Vehicles equipped with Scratch Shield have a label (see Figure 1) which is typically located underneath the hood. Vehicles that DO NOT have the Scratch Shield label shown in Figure 1 are not equipped with Scratch Shield. See this bulletin for further detail.
Associated Products (9)Associated Documents - August 27, 2013•Document ID: 10192235Service Bulletin/Repair InstructionsEQUIPMENT; WHEELS
- Mfr Comm. #:
- ITB92069D
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryInfiniti Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Infiniti design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Infiniti's standards. Infiniti Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Infiniti most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletin for further details.
Associated Products (81)2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX35+ 61 moreAssociated Documents - August 27, 2013•Document ID: 10054528Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- ITB-92-069-D
- Date Added:
- February 1, 2014
- Manufacturer:
- INFINITI
SummaryINFINITI: DUE TO USE OF AFTERMARKET CHROMING OF ALLOY WHEELS, FOR SOME VEHICLES, THE STANDARDS ARE NO LONGER ARE MET AND ARE SERIOUSLY DAMAGED AND NOT GUARANTEE OR WARRANTY THE MODIFIED WHEELS OR PERFORMANCE. MODELS ALL. NO YEARS LISTED. *PE
Associated Products (34)2014 Infiniti Q502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti FX352013 Infiniti FX502013 Infiniti JX352013 Infiniti M352013 Infiniti M372013 Infiniti M562013 Infiniti QX562012 Infiniti FX352012 Infiniti FX502012 Infiniti G252012 Infiniti G372012 Infiniti M352012 Infiniti M372012 Infiniti M562012 Infiniti QX562011 Infiniti EX35+ 14 moreAssociated Documents - August 26, 2013•Document ID: 10192232Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13006A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION This TSB is for troubleshooting of CAN Modules with "Diag-On-CAN" Diagnostics. The flow charts below are meant to troubleshoot current CAN DTCs. The flow charts are intended to diagnose one module at a time; repeat the process as needed for additional control units. Please see this bulletin for further details.
Associated Products (33)2013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti G372009 Infiniti M452009 Infiniti QX562008 Infiniti EX352008 Infiniti G352008 Infiniti G37+ 13 moreAssociated Documents - July 26, 2013•Document ID: 10192224Service Bulletin/Repair InstructionsVISIBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13028
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION When the headlamp switch is set to the AUTO position, AND the fog lamp switch is turned ON, ... the fog lamps and headlamps are designed to come on, regardless of ambient lighting. If the customer would prefer that both the headlamps and fog lamps not come on during daylight conditions while in AUTO mode, perform the steps in this bulletin to disable the fog lamp override feature. See this bulletin for more detail.
Associated Products (2)Associated Documents - July 25, 2013•Document ID: 10192221Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- ITB11066E
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Part order approval from TECH LINE is no longer required when replacing the Audio Visual (A/V) Control Unit on an Applied Vehicle. Previously, TECH LINE would need to be contacted to confirm (or assist with) diagnosis and the proper repair prior to ordering an A/V control unit. This process has been suspended.
Associated Products (11)Associated Documents - July 25, 2013•Document ID: 10192220Service Bulletin/Repair InstructionsEQUIPMENT; AIR BAGS; VEHICLE SPEED CONTROL
- Mfr Comm. #:
- ITB13027
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION: If the BCM in an Applied Vehicle is replaced for any reason and not configured correctly, the following issue may occur - When the driver door is opened, the convertible top opens. When replacing a BCM, make sure to - Follow information in the appropriate Service Manual - Use CONSULT-III plus to perform configuration - Select the correct vehicle in CONSULT-III plus - Confirm the VIN is correct (matches the vehicle) in CONSULT-III plus - Select/install the correct configuration
Associated Products (6)Associated Documents - July 23, 2013•Document ID: 10192219Service Bulletin/Repair InstructionsSTEERING; SUSPENSION; SERVICE BRAKES
- Mfr Comm. #:
- ITB00024F
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. See this bulletin for further details.
Associated Products (81)2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX35+ 61 moreAssociated Documents - July 23, 2013•Document ID: 10192218Service Bulletin/Repair InstructionsSERVICE BRAKES; WHEELS; STEERING
- Mfr Comm. #:
- ITB04038A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIf YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see ITB00-024). See this bulletin for further detail.
Associated Products (81)2014 Infiniti Q502014 Infiniti Q602014 Infiniti QX502014 Infiniti QX602014 Infiniti QX702014 Infiniti QX802013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX35+ 61 moreAssociated Documents - June 27, 2013•Document ID: 10192201Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- ITB13022A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION - The Applied Vehicles listed in this bulletin may arrive at the dealer with a "Power Cut OFF Switch" (see Figure 1). - This Power Cut Off Switch should have been removed before the vehicle was shipped to the dealer. In a few cases, a vehicle may arrive at the dealer with the switch still installed. - If a vehicle arrives at the dealer with a Power Cut Off Switch installed, it must be removed during the vehicle PDI. See this bulletin for further detail.
Associated Products (2)Associated Documents - June 7, 2013•Document ID: 10192191Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB98011F
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryAs part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
Associated Products (63)2014 Infiniti QX702013 Infiniti EX352013 Infiniti G372013 Infiniti QX562012 Infiniti EX352012 Infiniti G372012 Infiniti QX562011 Infiniti EX352011 Infiniti G372011 Infiniti QX562010 Infiniti EX352010 Infiniti G372010 Infiniti M452010 Infiniti QX562009 Infiniti EX352009 Infiniti G372009 Infiniti M452009 Infiniti QX562008 Infiniti EX352008 Infiniti G35+ 43 moreAssociated Documents - June 4, 2013•Document ID: 10192188Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- ITB08021F
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION The navigation system in the Applied Vehicles of this bulletin has an HDD (Hard Disc Drive) map data storage system. This bulletin contains the information and instructions for updating/upgrading the map data with a new version. See this bulletin for further detail.
Associated Products (12)Associated Documents - May 21, 2013•Document ID: 10192182Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- ITB13019A
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummaryIF YOU CONFIRM: The MIL is on with DTC P0710 (Transmission Fluid Temperature Sensor A) stored in the ECM only. NOTE: The DTC P0710 will only set in the ECM. If the DTC is set in both the ECM and TCM, this TSB does not apply. Refer to ASIST and the ESM for further diagnosis for DTC P0710. ACTION: Confirm this bulletin applies. * Check and compare your Current TCM Part Number to Table A on page 4. Please see this bullleitn for further details.
Associated Products (1)Associated Documents - April 10, 2013•Document ID: 10051925Service Bulletin/Repair InstructionsPOWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE); POWER TRAIN:CLUTCH ASSEMBLY
- Mfr Comm. #:
- ITB13-005A
- Date Added:
- April 22, 2013
- Manufacturer:
- INFINITI
SummaryINFINITI: CLUTCH PEDAL DOES NOT RETURN TO REST POSITION. *KB
Associated Products (5)Associated Documents - April 4, 2013•Document ID: 10192161Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- ITB13013
- Date Added:
- May 10, 2021
- Manufacturer:
- INFINITI
SummarySERVICE INFORMATION Improper adjustment or operation of the ASCD brake switch can cause the Automatic Speed Control Device (ASCD) to "not set" and/or DTC P0605 (ECM) to store. See this bulletin for further detail.
Associated Products (17)Associated Documents