Genesis G80 Service Bulletins
92 manufacturer communications on file.
- June 23, 2021•Document ID: 10253018Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; EXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- 21-01-029G-2
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
Associated Products (1)Associated Documents - April 23, 2021•Document ID: 10253017Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; EXTERIOR LIGHTING:HEADLIGHTS
- Mfr Comm. #:
- 21-01-029G-1
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
Associated Products (1)Associated Documents - April 20, 2021•Document ID: 10253016Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING
- Mfr Comm. #:
- 21-01-029G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides the procedure to inspect, and if necessary adjust the headlight aim on some 2021 MY Genesis G80 (RG3) vehicles equipped with Light Emitting Diode (LED) headlamps. The adjustment can help improve headlamp focus and reduce glare from the headlights to oncoming traffic.
Associated Products (1)Associated Documents - March 30, 2021•Document ID: 10190044Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- 21-EM-004H
- Date Added:
- April 7, 2021
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Associated Products (12)Associated Documents - February 3, 2021•Document ID: 10253049Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 21-BD-001G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryGenesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
Associated Products (22)2025 Genesis GV702024 Genesis G702024 Genesis G802024 Genesis G902024 Genesis GV602024 Genesis GV702024 Genesis GV802023 Genesis G702023 Genesis G802023 Genesis G902023 Genesis GV602023 Genesis GV702023 Genesis GV802022 Genesis G702022 Genesis G802022 Genesis G902022 Genesis GV702022 Genesis GV802021 Genesis G702021 Genesis G80+ 2 moreAssociated Documents - July 27, 2020•Document ID: 10253038Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 21-AT-012G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. ï· Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. ï· Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
Associated Products (16)Associated Documents - November 18, 2019•Document ID: 10253031Service Bulletin/Repair InstructionsVISIBILITY; VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 19-BE-017G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryCertain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms.
Associated Products (12)Associated Documents - September 30, 2019•Document ID: 10253026Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-023G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryIf you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
Associated Products (12)Associated Documents - June 12, 2019•Document ID: 10253043Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-014G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
Associated Products (12)Associated Documents - June 4, 2019•Document ID: 10253025Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-012G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
Associated Products (12)Associated Documents - April 15, 2019•Document ID: 10253042Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-007G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. ï· Before replacing an automatic transmission: Input the data into the TCU using the GDS. ï· Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
Associated Products (12)Associated Documents - April 8, 2019•Document ID: 10253024Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-008G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryWhen servicing a vehicle with a âCheck Engine lightâ and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
Associated Products (12)Associated Documents