Genesis G80 Service Bulletins
235 manufacturer communications on file.
- August 9, 2019•Document ID: 10165454Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Service Campaign
- Date Added:
- September 30, 2019
- Manufacturer:
- GENESIS
SummaryGenesis Motor America is conducting an Emissions Service Campaign to inspect, and if necessary, replace the oil cap on certain 2018MY G80 (DH) and G90 (HI) vehicles equipped with Lambda engines.
Associated Products (2)Associated Documents - August 7, 2019•Document ID: 10165452Service Bulletin/Repair InstructionsENGINE; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- 19-01-022HG
- Date Added:
- September 30, 2019
- Manufacturer:
- GENESIS
SummaryOn certain 2018MY G80 (DH) and G90 (HI) vehicles equipped with Lambda engines, the factory installed engine oil filler cap may have the incorrect text for engine oil viscosity printed on top.
Associated Products (2)Associated Documents - August 5, 2019•Document ID: 10165451Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 19-EM-002HG
- Date Added:
- September 30, 2019
- Manufacturer:
- GENESIS
SummaryIn an effort to assist customers to keep track of their next vehicle maintenance interval, all 2017-2018MY Genesis vehicles are equipped with the Service Interval Reminder Feature. Follow the information outlined in this bulletin to enable and set the Service Interval Reminder Feature on the applicable models listed below.
Associated Products (4)Associated Documents - July 10, 2019•Document ID: 10163864Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- 19-BD-002HG
- Date Added:
- August 19, 2019
- Manufacturer:
- GENESIS
SummaryThis procedure describes how to clean chrome surfaces when stains are present. Some stains may occur from hard water used during car wash. Moldings should not be replaced if stains are present. Follow the procedures below to remove stains from chrome moldings.
Associated Products (1)Associated Documents - June 12, 2019•Document ID: 10163285Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 19-AT-014HG
- Date Added:
- July 29, 2019
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
Associated Products (4)Associated Documents - June 12, 2019•Document ID: 10253043Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-014G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
Associated Products (18)Associated Documents - June 11, 2019•Document ID: 10163283Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- 19-EE-004HG-1
- Date Added:
- July 29, 2019
- Manufacturer:
- GENESIS
SummaryThis bulletin aids with the general battery maintenance procedure TSB 19-EE-006H, but only applies to vehicles equipped with Blue Link SOC reporting ability.
Associated Products (4)Associated Documents - June 11, 2019•Document ID: 10163281Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 19-EE-006HG
- Date Added:
- July 29, 2019
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information on performing battery maintenance for PDI and In-Stock vehicle inventory.
Associated Products (4)Associated Documents - June 4, 2019•Document ID: 10163280Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 19-AT-012HG
- Date Added:
- July 29, 2019
- Manufacturer:
- GENESIS
SummaryThis TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
Associated Products (4)Associated Documents - June 4, 2019•Document ID: 10253025Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-012G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
Associated Products (18)Associated Documents - May 6, 2019•Document ID: 10161686Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-011HG
- Date Added:
- July 1, 2019
- Manufacturer:
- GENESIS
SummaryThe procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles.
Associated Products (4)Associated Documents - April 15, 2019•Document ID: 10160101Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 19-BE-007HG
- Date Added:
- May 20, 2019
- Manufacturer:
- GENESIS
SummaryThis bulletin provides information for the following: General key FOB information including smart key and card key. How to program smart key FOB and card key. How to program additional key FOB when applicable.
Associated Products (4)Associated Documents - April 15, 2019•Document ID: 10160099Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-FL-003HG
- Date Added:
- May 20, 2019
- Manufacturer:
- GENESIS
SummaryThis bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
Associated Products (4)Associated Documents - April 15, 2019•Document ID: 10160098Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 19-FL-003H
- Date Added:
- May 20, 2019
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
Associated Products (166)2019 Genesis G702019 Genesis G802019 Genesis G902019 Hyundai Accent2019 Hyundai Elantra2019 Hyundai Elantra GT2019 Hyundai Ioniq2019 Hyundai Kona2019 Hyundai Nexo2019 Hyundai Santa Fe2019 Hyundai Sonata2019 Hyundai Tucson2019 Hyundai Veloster2018 Genesis G802018 Genesis G902018 Hyundai Accent2018 Hyundai Elantra2018 Hyundai Elantra GT2018 Hyundai Ioniq2018 Hyundai Kona+ 146 moreAssociated Documents - April 15, 2019•Document ID: 10160096Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-007HG
- Date Added:
- May 20, 2019
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCM learning time and improve the shift quality.
Associated Products (4)Associated Documents - April 15, 2019•Document ID: 10253042Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- 19-AT-007G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryThis bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. ï· Before replacing an automatic transmission: Input the data into the TCU using the GDS. ï· Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
Associated Products (18)Associated Documents - April 8, 2019•Document ID: 10253024Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN
- Mfr Comm. #:
- 19-AT-008G
- Date Added:
- April 11, 2024
- Manufacturer:
- GENESIS
SummaryWhen servicing a vehicle with a âCheck Engine lightâ and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
Associated Products (18)Associated Documents - March 19, 2019•Document ID: 10158908Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; STRUCTURE:FRAME AND MEMBERS
- Mfr Comm. #:
- 19-GI-002G
- Date Added:
- April 22, 2019
- Manufacturer:
- GENESIS
SummaryEffective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) set a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of the Gross Vehicle Weight Rating or 45.4kg (100 pounds). If the total added weight exceeds the lesser of the limit, a label (See Figure 1) must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
Associated Products (2)Associated Documents - March 13, 2019•Document ID: 10158802Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID
- Mfr Comm. #:
- 19-AT-002HG
- Date Added:
- April 22, 2019
- Manufacturer:
- GENESIS
SummaryWhen servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
Associated Products (4)Associated Documents - March 5, 2019•Document ID: 10158795Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- 19-AT-004HG
- Date Added:
- April 22, 2019
- Manufacturer:
- GENESIS
SummaryThis bulletin provides the procedure to replace the O-ring to the automatic transmission fluid (ATF) warmer connector on some vehicles which may exhibit a coolant leak between the ATF connector and engine side heater pipe.
Associated Products (4)Associated Documents