Ford Mustang Service Bulletins (2020)
184 manufacturer communications on file.
- May 29, 2023•Document ID: 10236680Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 22-2428
- Date Added:
- May 30, 2023
- Manufacturer:
- FORD
SummarySome 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60 transmission and built on or before 23-Dec-2022 or with a 18R80/10R80MHT transmission and built on or before 15-Aug-2022 may exhibit a harsh/delayed engagement and/or harsh/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the PCM or TCM, the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
Associated Products (45)2023 Ford Bronco2023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford Mustang2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Bronco2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Lincoln Aviator2022 Lincoln Navigator2021 Ford Bronco2021 Ford Expedition+ 25 moreAssociated Documents - May 23, 2023•Document ID: 10236683Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 23-2152
- Date Added:
- May 29, 2023
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 23-2123 to update the Issue statement. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2023 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the keep alive memory in the PCM/TCM or the transmission main control valve body. To correct the condition, follow the Service Procedure to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
Associated Products (21)2023 Ford Ranger2022 Ford Ranger2021 Ford Expedition2021 Ford Mustang2021 Ford Ranger2021 Lincoln Navigator2020 Ford Expedition2020 Ford F-1502020 Ford Mustang2020 Ford Ranger2020 Lincoln Navigator2019 Ford Expedition2019 Ford F-1502019 Ford Mustang2019 Ford Ranger2019 Lincoln Navigator2018 Ford Expedition2018 Ford F-1502018 Ford Mustang2018 Lincoln Navigator+ 1 moreAssociated Documents - May 4, 2023•Document ID: 10236033Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- TSB 23-2132
- Date Added:
- May 31, 2023
- Manufacturer:
- FORD
SummarySome 2018-2023 Mustang vehicles (non-Shelby GT-350) may exhibit various concerns with the active exhaust system. These may include Exhaust Mode Selection Not Available messages, and/or illuminated malfunction indicator lamp (MIL) with diagnostics trouble codes (DTCs) P26C5, P26C6, P26FE, P2BF9, P2BFB, P26C7, P2BF5, P2BF8, P2BFD and/or P2BFA. This may be due to an improperly seated exhaust system. To correct the condition, follow the Service Procedure to diagnose the tailpipe actuator.
Associated Products (6)Associated Documents - April 14, 2023•Document ID: 10234596Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 23-2123
- Date Added:
- May 4, 2023
- Manufacturer:
- FORD
SummarySome 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2023 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware break-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
Associated Products (21)2023 Ford Ranger2022 Ford Ranger2021 Ford Expedition2021 Ford Mustang2021 Ford Ranger2021 Lincoln Navigator2020 Ford Expedition2020 Ford F-1502020 Ford Mustang2020 Ford Ranger2020 Lincoln Navigator2019 Ford Expedition2019 Ford F-1502019 Ford Mustang2019 Ford Ranger2019 Lincoln Navigator2018 Ford Expedition2018 Ford F-1502018 Ford Mustang2018 Lincoln Navigator+ 1 moreAssociated Documents - April 4, 2023•Document ID: 10235153Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- SSM 51536
- Date Added:
- May 4, 2023
- Manufacturer:
- LINCOLN
SummaryFor 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
Associated Products (350)2023 Ford Bronco2023 Ford Bronco Sport2023 Ford Edge2023 Ford Escape2023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford F-2502023 Ford F-3502023 Ford F-4502023 Ford F-5502023 Ford F-6502023 Ford F-7502023 Ford Maverick2023 Ford Mustang2023 Ford Mustang Mach-E2023 Ford Ranger2023 Ford Transit Connect2023 Lincoln Aviator2023 Lincoln Corsair+ 330 moreAssociated Documents - March 15, 2023•Document ID: 10233738Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- SSM 51449
- Date Added:
- April 5, 2023
- Manufacturer:
- FORD
SummarySome 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPassî/LincolnWayî app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (55)2023 Ford Explorer2023 Ford Maverick2023 Ford Ranger2023 Ford Transit Connect2023 Lincoln Aviator2022 Ford Ecosport2022 Ford Escape2022 Ford Explorer2022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport+ 35 moreAssociated Documents - March 8, 2023•Document ID: 10233695Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 51419
- Date Added:
- April 4, 2023
- Manufacturer:
- FORD
SummarySome 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability.
Associated Products (49)2023 Ford Bronco2023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford F-2502023 Ford F-3502023 Ford F-4502023 Ford F-5502023 Ford Mustang2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Bronco2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford Mustang2022 Ford Ranger2022 Ford Transit+ 29 moreAssociated Documents - January 23, 2023•Document ID: 10230933Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- SSM 51312
- Date Added:
- February 2, 2023
- Manufacturer:
- FORD
SummaryDuring replacement of the electronic power assist system (EPAS) steering gear assembly on 2015-2023 Mustang vehicles, removal and replacement of the inner tie rods and bellows boots is required. To assist engineering with root cause analysis of failed steering gears, include these parts in the same package when returning warranty replacement steering gears. Make sure to avoid damage to the bellows boots or inner tie rods during removal. The steering gear should also be packaged in the original box with all protective insulators in place to properly protect it during shipping.
Associated Products (9)Associated Documents - December 16, 2022•Document ID: 10228876Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 51261
- Date Added:
- January 6, 2023
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (145)2023 Ford Bronco2023 Ford Bronco Sport2023 Ford E-1502023 Ford E-2502023 Ford E-3502023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford Maverick2023 Ford Mustang2023 Ford Mustang Mach-E2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-1502022 Ford E-2502022 Ford E-350+ 125 moreAssociated Documents - December 7, 2022•Document ID: 10228853Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 51236
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2018-2022 Mustang vehicles equipped with a 5.0L engine and a 10R80 transmission may exhibit a buck/jerk sensation that may be perceived as an engine misfire during throttle tip-in between 35-45 mph (56-72 km/h) and with the transmission in 8th, 9th, or 10th gear. This buck/jerk sensation is a characteristic of the vehicle and can be compared to a like vehicle that is equipped with a similar powertrain (engine, transmission, and rear end gear ratio) driven in the same manner. A diagnostic trouble code (DTC) will not set because of this condition and no repair attempts should be made. If a misfire DTC is present, the DTC should be diagnosed first following the correct diagnostic procedure outlined in the Workshop Manual, Section 303-07B.
Associated Products (5)Associated Documents - December 2, 2022•Document ID: 10228848Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- SSM 51232
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2018-2022 Mustang vehicles equipped with a 5.0L engine and a 10R80 transmission may exhibit a buck/jerk sensation that may be perceived as an engine misfire during throttle tip-in between 35-45 MPH (56-72 KPH) and with the transmission in 8th, 9th, or 10th gear. This buck/jerk sensation can be compared to a like vehicle that is equipped with a similar powertrain (engine, transmission, and rear end gear ratio) and driven in the same manner. A diagnostic trouble code (DTC) will not set because of this condition. If a misfire DTC is present, the DTC should be diagnosed first following the correct diagnostic procedure outlined in the Workshop Manual, Section 303-07B.
Associated Products (5)Associated Documents - December 1, 2022•Document ID: 10228846Service Bulletin/Repair InstructionsCOMMUNICATION:MANUFACTURER TELEMATICS
- Mfr Comm. #:
- SSM 51228
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2020-2023 Ford and Lincoln vehicles equipped with a telematic control unit (TCU) may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization, and/or modem electronic serial number (ESN) could not be displayed in the center display screen. To correct this condition prior to programming, remove the TCU fuse for 5-minutes then reinstall. Delete all previous session files for the vehicle. Start a new Ford Diagnosis and Repair System (FDRS) session. Perform a TCU provisioning and Program the TCU to the latest FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (40)2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-2502021 Ford F-3502021 Ford F-4502021 Ford F-5502021 Ford Mustang+ 20 moreAssociated Documents - October 13, 2022•Document ID: 10224334Service Bulletin/Repair InstructionsCOMMUNICATION:MANUFACTURER TELEMATICS; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 51131
- Date Added:
- October 19, 2022
- Manufacturer:
- LINCOLN
SummarySome 2020-2022 Ford and Lincoln vehicles equipped with a telematic control unit (TCU) may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization, and/or modem electronic serial number (ESN) could not be displayed in the center display screen. To correct this condition prior to programming, remove the TCU fuse for 5-minutes then reinstall. Delete all previous session files for the vehicle. Start a new Ford Diagnosis and Repair System (FDRS) session. Perform a TCU provisioning and Program the TCU to the latest FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (44)2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Escape2022 Ford Explorer2022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-250+ 24 moreAssociated Documents - October 6, 2022•Document ID: 10222788Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SSM 51120
- Date Added:
- October 11, 2022
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (124)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-1502022 Ford E-2502022 Ford E-3502022 Ford E-4502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford F-6502022 Ford F-7502022 Ford GT2022 Ford Maverick2022 Ford Mustang+ 104 moreAssociated Documents - October 4, 2022•Document ID: 10225443Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- TSB 22-2282
- Date Added:
- October 31, 2022
- Manufacturer:
- FORD
SummarySome 2018-2022 Mustang vehicles (non-Shelby GT-350) may exhibit various concerns with the active exhaust system. These may include Drive Mode Not Available or Exhaust Mode Not Available messages, and/or illuminated malfunction indicator lamp (MIL) with diagnostics trouble codes (DTCs) P26C5, P26C6, P26FE, P2BF9, P2BFB, P26C7, P2BF5, P2BF8, P2BFD and/or P2BFA. This may be due to an improperly seated exhaust system. To correct the condition, follow the Service Procedure to diagnose the tailpipe actuator .
Associated Products (5)Associated Documents - September 20, 2022•Document ID: 10222197Service Bulletin/Repair InstructionsPARKING BRAKE
- Mfr Comm. #:
- TSB 22-2362
- Date Added:
- September 30, 2022
- Manufacturer:
- FORD
SummarySome 2020-2022 Mustang Shelby GT500 vehicles may exhibit an intermittent parking brake fault message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) C1034, C2005, C2006, C2007 and/or C2008 stored in the anti-lock brake system (ABS) module and/or a parking brake that sticks after being applied. This may be due to internal binding of the piston within the parking brake caliper. To correct the condition, follow the Service Procedure to replace the parking brake caliper(s).
Associated Products (3)Associated Documents - September 5, 2022•Document ID: 10220379Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 22-2339
- Date Added:
- September 23, 2022
- Manufacturer:
- FORD
SummarySome 2018-2021 Expedition/Navigator, 2018-2020 F-150/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P163E stored in the powertrain control module (PCM) or transmission control module (TCM) after replacing the main control valve body. This may be due to software incompatibility between the replacement main control valve body solenoid strategy file and the PCM/TCM software. To correct this condition, follow the Service Procedure to enter only the 13-digit solenoid body strategy when downloading transmission strategy.
Associated Products (18)2021 Ford Expedition2021 Ford Mustang2021 Ford Ranger2021 Lincoln Navigator2020 Ford Expedition2020 Ford F-1502020 Ford Mustang2020 Ford Ranger2020 Lincoln Navigator2019 Ford Expedition2019 Ford F-1502019 Ford Mustang2019 Ford Ranger2019 Lincoln Navigator2018 Ford Expedition2018 Ford F-1502018 Ford Mustang2018 Lincoln NavigatorAssociated Documents - July 29, 2022•Document ID: 10217028Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50975
- Date Added:
- August 2, 2022
- Manufacturer:
- LINCOLN
SummarySome 2017-2022 Ford/Lincoln customers may experience a notification in the FordPassÃÂÃÂÃÂî/LincolnWayÃÂÃÂÃÂî app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
Associated Products (119)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford Edge2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford GT2022 Ford Maverick2022 Ford Mustang2022 Ford Mustang Mach-E2022 Ford Ranger2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Bronco2021 Ford Bronco Sport+ 99 moreAssociated Documents - July 25, 2022•Document ID: 10216466Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- TSB 22-2302
- Date Added:
- July 28, 2022
- Manufacturer:
- FORD
SummarySome 2018-2020 Mustang vehicles equipped with a 5.0L engine and an MT-82 manual transmission may experience a loss of movement and/or difficulty shifting. This may be due to excessive wheel hop which is caused by aggressive acceleration at low speeds while using launch control. To correct the condition, follow the Service Procedure to replace the failed components and replace the peak torque limiter.
Associated Products (3)Associated Documents - July 13, 2022•Document ID: 10215717Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT
- Mfr Comm. #:
- TSB 22-2280
- Date Added:
- July 18, 2022
- Manufacturer:
- FORD
SummarySome 2020-2021 Mustang GT500 vehicles may experience erratic and harsh shifting at highway speeds and/or perceived lack of power when accelerating from a stop, with a powertrain malfunction (wrench) indicator and diagnostic trouble codes (DTCs) P1601 and/or P061A stored in the powertrain control module (PCM) while using SelectShift. This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
Associated Products (2)Associated Documents