Ford F-250 Complaints (1996)

187 consumer complaints on file.

#10366654November 18, 2010
STEERING
1996 FORD, F250, 7.3 LITER DIESEL: HIGH PRESSURE POWER STEERING HOSE FAILED AT CONNECTION TO THE POWER STEERING PUMP. THE FAILURE OCCURRED WHEN BACKING OUT OF A PARKING SPACE. THE CAUSE OF THE FAILURE IS DUE TO FAILURE OF AN INTERNAL PLASTIC COMPONENT THAT CONNECTS THE TUBING TO THE CONNECTING NUT/FITTING. REPLACED WITH A FABRICATED HYDRAULIC HOSE THAT DID NOT HAVE ANY INTERNAL PLASTIC COMPONENTS. *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10365720November 15, 2010
VEHICLE SPEED CONTROL
TL* THE CONTACT OWNS A 1996 FORD F-250. THE CONTACT STATED THAT WHILE THE VEHICLE WAS PARKED NEXT TO THE GARAGE THE VEHICLE IGNITED INTO FLAMES. THE VEHICLE BURNED DOWN THE ENTIRE GARAGE AND DID PARTIAL FIRE DAMAGE TO THE HOUSE. THE CONTACT HAS NOT CALLED THE MANUFACTURER REGARDING THE FIRE. THE CONTACT NOTICE NUMEROUS COMPLAINTS REGARDING FIRES FOR THIS YEAR MAKE AND MODEL. THE CONTACT HAD THE VEHICLE REPAIRED UNDER A MANUFACTURERS RECALL YEARS PRIOR TO THE FAILURE FOR THE CRUISE CONTROL WHERE THE DEALER REPLACED A WIRING HARNESS THAT COULD CAUSE A FIRE. THE CONTACT STATED SOMEONE COULD HAVE LOST THEIR LIFE DUE TO THE FIRE. THE FAILURE MILEAGE WAS 158,000.
Crash:
No
Fire:
Yes
Injuries:
0
Deaths:
0
#10295252December 10, 2009
ENGINE AND ENGINE COOLING:ENGINE
TL* THE CONTACT OWNS A 1996 FORD F250. HIS VEHICLE CAUGHT ON FIRE WHILE HE WAS MAKING REPAIRS TO THE ENGINE. THE FIRE SPREAD TO THE WIRING HARNESS AND BURNED THE HIGH PRESSURE OIL LINE. HE HAD TO DISCONNECT THE BATTERIES. THE FORD MANUFACTURER WAS NOTIFIED OF THE FAILURE. FORDS LEGAL DEPARTMENT SENT A LETTER DENYING RESPONSIBILITY , BECAUSE THE VEHICLE WAS NOT REPAIRED BY A FORD DEALER. THE FAILURE MILEAGE WAS 210,000.
Crash:
No
Fire:
Yes
Injuries:
0
Deaths:
0
#10289346October 22, 2009
FUEL SYSTEM, GASOLINE
A MALFUNCTIONING CHECK VALVE WITHIN THE FUEL PUMP ASSEMBLY CAUSES A PORTION OF THE UNUSED FUEL FROM ONE TANK TO BE RETURNED TO THE SECOND TANK. WHEN THIS OCCURS, THE CAPACITY OF THE SECOND TANK CAN BE EXCEEDED, CAUSING FUEL SPILLAGE. *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10285108September 24, 2009
SERVICE BRAKES, HYDRAULIC
FORD F250 1996 BRAKE CYLINDER LEAK FIRE. *TR
Crash:
No
Fire:
Yes
Injuries:
0
Deaths:
0
#10283633September 11, 2009
ENGINE AND ENGINE COOLING:ENGINE:DIESEL
TL* THE CONTACT OWNS A 1996 FORD F250. THE CONTACT STATED THAT DURING DECELERATION, SHIFTING INTO REVERSE, OR WHILE IN IDLE THE VEHICLE INTERMITTENTLY STALLED. THE MANUFACTURER WAS NOTIFIED IN REFERENCE TO RECALL# 07V553000, ENGINE AND ENGINE COOLING, ENGINE, DIESEL WHO CONFIRMED THAT HIS VIN WAS EXCLUDED. NO REPAIRS HAVE BEEN MADE. THE VEHICLE IDENTIFICATION NUMBER WAS UNAVAILABLE. THE FAILURE MILEAGE WAS 360,000 AND THE CURRENT MILEAGE WAS UNKNOWN. UPDATED 10/06/09 *BF UPDATED 10/08/09
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10272941June 5, 2009
FUEL SYSTEM, DIESEL
TL*THE CONTACT OWNS A 1996 FORD F250. THE CONTACT STATED THAT THE FILTER HOUSING CRACKED AND LEAKED DIESEL FLUID FROM THE TOP OF THE ENGINE DOWN INTO THE VEHICLE. HE WAS CONCERNED THAT THE LEAK COULD CAUSE A FIRE. AN INDEPENDENT MECHANIC ASSUMED THAT THE FUEL PUMP WAS CAUSING THE LEAK. AFTER THE REPAIRS WERE COMPLETED, THE MECHANIC STATED THAT THE FUEL HOUSING CRACKED AND CAUSED THE LEAK. THE CURRENT AND FAILURE MILEAGES WERE LESS THAN 230,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10246189October 21, 2008
ENGINE AND ENGINE COOLING:ENGINE:DIESEL
I HAVE A 1996 FORD F250 7.3 LITER DIESEL TRUCK. IT STALLS ON OCCASION AT LOW SPEEDS WHICH I FEEL IS A SAFETY ISSUE. I FOUND OUT THAT FORD HAD A RECALL ON 1997 AND NEWER TRUCKS BECAUSE OF THE CAM POSITION SENSOR. EVERYTHING I COULD FIND OUT ABOUT MY PROBLEM IS THE SAME. THE CPS UNIT CAUSES THIS PROBLEM. I FEEL FORD SHOULD REPLACE MY CPS UNIT AS WELL. *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10240855September 4, 2008
ENGINE AND ENGINE COOLING
WHILE DRIVING IN TRAFFIC MY CAMSHAFT POSITION SENSOR FAILED WITHOUT WARNING CAUSING MY DIESEL ENGINE TO SHUT OFF, LEAVING ME WITH NO STEERING AND BRAKING ABILITY. THIS ACTION ALMOST CAUSED A TRAFFIC ACCIDENT. MY TRUCK WAS TOWED TO MY LOCAL REPAIR SHOP AND THE CAMSHAFT POSITION SENSOR WAS REPLACED. I RETAINED THE SENSOR THAT WAS REPLACED. *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10234866July 18, 2008
ENGINE AND ENGINE COOLING:ENGINE:DIESEL
TL*THE CONTACT OWNS A 1996 FORD F250. THE CONTACT STATED THAT THE CAM POSITION SENSOR FAILED WITHOUT WARNING AND THE MOTOR FAILED AS WELL. THE SENSOR IS LOCATED ON THE LOWER FRONT END OF THE MOTOR OF THE VEHICLE. THE CONTACT STATED THAT THE VEHICLE WOULD SHUT OFF WITHOUT WARNING WHILE DRIVING VARIOUS SPEEDS. HE CALLED THE FORD MANUFACTURER AND THEY STATED THAT THEY HAVE BEEN AWARE OF THE ISSUE SINCE 1996, BUT HAS DONE NOTHING TO CORRECT THE FAILURE. THE FAILURE MILEAGE WAS 102,000. UPDATE 09/10/08 *CW THE CAM SHAFT POSITION SENSOR WAS THE CAUSE OF THE ENGINE STALLING. UPDATED 09/16/08 *JB
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10223081April 1, 2008
ENGINE AND ENGINE COOLING:ENGINE:DIESEL
I HAVE A 1996 F250 THAT I HAVE HAD TO REPLACE THE CAM SENSOR FOR THE SAME REASON THAT THE 97-03 HAVE HAD TO REPLACE THEIRS THIS IS A 7.3 LITER POWERSTROKE WHY AM I NOT GETTING A RECALL NOTICE FOR THIS YEAR MODEL ITS THE SAME PROBLEM AND HAVE HAD SEVERAL REALLY CLOSE CALLS WITH IT DYING IN TRAFFIC THIS HAS HAPPENED SEVERAL TIMES A DAY EVERY TIME I DROVE IT. *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10220816March 11, 2008
ENGINE AND ENGINE COOLING
OUR FORD F-250 4X4 CAUGHT FIRE IN OUR DRIVEWAY ON DEC. 2, 2007. THE TRUCK HAD NOT BEEN STARTED IN OVER A MONTH. IT WAS LIMITED TO THE ENGINE COMPARTMENT AND THE GRILL AREA OF THE VEHICLE. *TR
Crash:
No
Fire:
Yes
Injuries:
0
Deaths:
0
#10219703February 29, 2008
SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM:HOSES, LINES/PIPING, AND FITTINGS
TL*THE CONTACT OWNS A 1996 FORD F-250. WHILE DRIVING 65 MPH DOWN A HILL, THE VACUUM PUMP FAILED WHEN THE BRAKES WERE DEPRESSED. THE CONTACT STATED THAT HE DROVE THROUGH A RED LIGHT AND COULD NOT STOP THE VEHICLE. THE VEHICLE FINALLY COASTED TO A HALT. THE EMERGENCY BRAKE DID NOT WORK EITHER DUE TO THE WEIGHT OF THE BOAT THAT THE VEHICLE WAS PULLING. THE CONTACT REPLACED THE VACUUM PUMP. THE DEALER AND MANUFACTURER HAVE NOT BEEN NOTIFIED. THE PURCHASE DATE WAS UNKNOWN. THE CURRENT MILEAGE WAS 115,000 AND FAILURE MILEAGE WAS 71,000.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10218245February 17, 2008
ENGINE AND ENGINE COOLING:ENGINE:DIESEL
MY 1996 F250 WITH A 7.3 LITER POWERSTROKE . WAS HUNTING FOR MONTHS , I ATTRIBUTED THIS TO FUEL , BUT THEN IT STALLED ON MY WIFE . FOLLOWED BY STALLING ON ME THEN HAD TO HAVE IT TOWED HOME . THE PROBLEM , CPS CAMSHAFT POSITION SENSOR. I HAD HEARD ABOUT THIS BEFORE WITH OTHER TRUCKS MOST TIMES LEADING TO AN ACCIDENT. I WAS LUCKY BUT NOT HAPPY YOU SHOULD RECALL THESE VEHICLES AT FORDS EXPENSE FIX THE PROBLEM FOREVER AND REIMBURSE ANY OUT OF POCKET EXPENSES. *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10212199December 18, 2007
ENGINE AND ENGINE COOLING
TL*THE CONTACT OWNS A 1996 FORD F250 HD. THE CAM SENSOR WAS REPLACED ON OCTOBER 28, 2003. THE CONTACT BELIEVES THAT THE REPLACEMENT PART IS FAULTY AND WILL NEED TO BE REPLACED AGAIN. THERE IS A SAFETY RECALL ON THE CAM SENSOR, BUT IT DOES NOT APPLY TO HIS VEHICLE YEAR. THERE HAS BEEN NO RECENT FAILURE TO DATE. THE RECALL NUMBER WAS UNKNOWN. THE CURRENT MILEAGE WAS 113,800 AND THE FAILURE MILEAGE IN 2003 WAS 96,228. UPDATED 01/17/08 *BF UPDATED 01/17/08 *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10210682December 3, 2007
UNKNOWN OR OTHER
TRUCK HAD NOT BEEN DRIVEN IN JUST OVER A MONTH AND WHILE SITTING IN THE DRIVEWAY THE ENGINE COMPARTMENT CAUGHT FIRE. FIREFIGHTERS WERE NOT ABLE TO DETERMINE WHERE THE FIRE STARTED BECAUSE THEY WERE UNABLE TO OPEN THE HOOD DUE TO THE FIRE DAMAGE. *TR
Crash:
No
Fire:
Yes
Injuries:
0
Deaths:
0
#10202582September 11, 2007
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
I HAVE A 1996 FORD F-250 HEAVY DUTY PICKUP WHICH I PURCHASED NEW AND ALL THE BRAKE LINES ARE COMPLETELY RUSTED THROUGH. I WAS TESTING THE BRAKES AFTER ADJUSTING THEM IN FRONT OF MY HOUSE WHEN THE PEDAL WENT TO THE FLOOR. ALL THE FLUID WAS BLOWN OUT OF THE RUSTED LINE ON THE FRONT BRAKES, AFTER I REPAIRED THEM AND WAS BLEEDING THE AIR FROM THEM, WHILE HOLDING DOWN ON THE PEDAL ANOTHER LINE ON THE REAR BRAKES BLEW OUT. IN SHORT, I SPENT 10 HRS. REPLACING ALL THE BRAKE LINES THAT WERE RUSTED OUT. I HAVE OLDER CARS AND TRUCKS AND HAVE NEVER HAD THIS ISSUE BEFORE. IF I HAD BEEN HAULING A LOAD THAT THIS TRUCK IS RATED TO PULL (14,000LBS.) TOWING CAPACITY,I COULD HAVE RUN RIGHT OVER SOMEONE. I WONDER HOW MANY OTHER TRUCKS ARE OUT THERE ON OUR ROADS WITH THIS SAME PROBLEM? I CONTACTED FORD MOTOR CO. FOR WHICH THEIR RESPONSE WAS TO CONTACT THE DEALER FOR REPAIRS THAT I TOLD THEM I HAVE ALREADY COMPLETED. I HOPE THIS IS AN ISOLATED INCIDENT BUT I HAVE MY DOUBTS. *TR UPDATED 01-15-08. *KB THE FRONT AND REAR BRAKE LINES RUSTED THROUGH. UPDATED *JB
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10196412July 15, 2007
TIRES, TIRES:TREAD/BELT
I HAVE A FORD F-250 POWERSTROKE YEAR 1996. THE TREAD ON THE TIRE SEPARATED, CAUSING MAJOR DAMAGE TO THE TRUCK. THE TIRE WAS A TRAIL CUTTER RADIAL R/T. LT 265/75/R16. *TR
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#10182653February 15, 2007
VEHICLE SPEED CONTROL:CRUISE CONTROL
TL* THE CONTACT OWNS A 1996 FORD F-250. THE VEHICLE CAUGHT ON FIRE WHILE PARKED IN THE DRIVEWAY. A NEIGHBOR INFORMED THE CONTACT OF THE VEHICLE FIRE AND CALLED THE FIRE DEPARTMENT. THE FIRE DESTROYED THE VEHICLE, AND WAS ABLE TO MAINTAIN THE SIDE PANELS FOR THE TRUCK BED. THE MANUFACTURERWAS CURRENTY INVESTIGATING THE VEHICLE FIRE. HOWEVER, THE CONTACT HAD NO INFORMATION ON THE STATUS OF THE INVESTIGATION. THE CONTACT COULD PROVIDE PICTURES OF THE VEHICLE. THE CURRENT AND FAILURE MILEAGE WAS 30,000. *AK
Crash:
No
Fire:
Yes
Injuries:
0
Deaths:
0
#10180898January 27, 2007
ENGINE AND ENGINE COOLING:ENGINE:DIESEL
TRUCK STALLED OR QUIT FOR NO APPARENT REASON WHILE DRIVING. *JB
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to Ford F-250