Ford Bronco Service Bulletins (2023)
204 manufacturer communications on file.
- January 23, 2023•Document ID: 10230775Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSB 23-2015
- Date Added:
- January 31, 2023
- Manufacturer:
- FORD
Summary2021-2022 F-150 vehicles with 2.7L, 3.3L, 3.5L EcoBoost or 5.0L engines, 2020-2022 Transit vehicles with 3.5L Duratec/3.5L EcoBoost engines, 2023 Bronco with the 2.3L engine having charging system diagnostics performed in the Workshop Manual (WSM) may experience the generator voltage desired (GENVDSD) parameter identification (PID) missing from the powertrain control module (PCM) PID list in the Ford Diagnosis And Repair System (FDRS) scan tool. This may be due to a software parameter in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
Associated Products (5)Associated Documents - January 6, 2023•Document ID: 10230784Service Bulletin/Repair InstructionsVISIBILITY:SUN/MOON ROOF ASSEMBLY
- Mfr Comm. #:
- SSM 51287
- Date Added:
- January 31, 2023
- Manufacturer:
- FORD
SummarySome 2021-2022 Bronco vehicles equipped with a soft top roof may experience a strut that has detached from the soft top frame. It is not possible to reinstall one of these struts once they become detached from the frame. If this occurs, a service strut must be ordered which will arrive with a compression bracket which maintains the exact strut length required for installation. For installation instructions, refer to the Workshop Manual, Section 501-18A. The larger, rear struts are available by ordering (service part number: M2DZ-78515A60-B). The smaller, front struts are available by ordering (service part number: M2DZ-78515A59-B). Each part number contains 1 strut.
Associated Products (3)Associated Documents - December 16, 2022•Document ID: 10228876Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 51261
- Date Added:
- January 6, 2023
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (41)2023 Ford Bronco2023 Ford Bronco Sport2023 Ford E-3502023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford Maverick2023 Ford Mustang2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-3502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-150+ 21 moreAssociated Documents - December 1, 2022•Document ID: 10228842Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
- Mfr Comm. #:
- SSM 51227
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit noises coming from the brake pedal while applying and/or releasing the brake pedal or while the vehicle is off without brake pedal application. A single click and/or clunk may be heard during brake pedal application and again on brake pedal release and is considered normal. Clicking may also be heard while the vehicle is off, and without the brake pedal being applied. The clicking heard with the vehicle off is due to the EBB going through the normal shut-down process. The amount of noise will vary between EBB modules and replacement of the EBB module is not expected to reduce the noises.
Associated Products (3)Associated Documents