Dodge Durango Service Bulletins (2015)
349 manufacturer communications on file.
- November 5, 2015•Document ID: 10218140Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 1808215
- Date Added:
- August 22, 2022
- Manufacturer:
- DODGE
SummaryPowertrain Diagnostic And System Improvements.
Associated Products (3)Associated Documents - November 5, 2015•Document ID: 10215174Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 1808215
- Date Added:
- July 5, 2022
- Manufacturer:
- JEEP
SummaryPowertrain Diagnostic And System Improvements.
Associated Products (3)Associated Documents - November 5, 2015•Document ID: 10159906Service Bulletin/Repair InstructionsENGINE; POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-082-15
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryFlash: Powertrain Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The following powertrain system improvements/enhancements are included in this software release. These symptoms are broken down by vehicle. 2015 WK 3.0L engine (Sales Code EHD) ? Enhancements to remote engine start. 2015 WK 5.7L engine (Sales Code EZH) ? Enhancements to improve a slight lag or hesitation during Multi Displacement System (MDS) mode transitions. ? Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. ? Malfunction Indicator Lamp (MIL) illuminated with Diagnostic Trouble Code (DTC) U0140-00 - Lost Communication with Body Control Module (BCM). 2014 WD 5.7L engine (Sales Code EZH) ? Enhancements to improve a slight drop in engine RPM when the vehicle is shifted to reverse or drive within 3 seconds of a cold start. 2015 WD 5.7L engine (Sales Code EZH) ? Enhancements to remote engine start.
Associated Products (3)Associated Documents - November 5, 2015•Document ID: 10074953Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-082-15
- Date Added:
- June 22, 2016
- Manufacturer:
- DODGE
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (3)Associated Documents - November 4, 2015•Document ID: 10215035Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- Carpet
- Date Added:
- July 5, 2022
- Manufacturer:
- DODGE
SummaryCARPET ASSY - FLOOR.
Associated Products (2)Associated Documents - November 4, 2015•Document ID: 10159880Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 68214447A
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryPart Description: Fuel Tank Issue Description: Before replacing this part, please call Bob Bruni at cell (248) 736-8958. If a response is not received within 15 minutes, then proceed with necessary repair.
Associated Products (1)Associated Documents - November 4, 2015•Document ID: 10159873Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- 1NV00LU5A
- Date Added:
- May 20, 2019
- Manufacturer:
- DODGE
SummaryPart Description: CARPET ASSY - FLOOR Issue Description: Do not replace Carpet due to exposed carpet white backing along the Door Sills or B-Pillar Trim. Please rake (rub) a plastic or non-abrasive tool (e.g. credit card edge) to relax the carpet backing and fibers such that fibers stand up and the carpet backing is no longer exposed. Replace Carpet if backing is still visible. Do not replace Carpet due to exposed floor pan or gaps to interior trim. Reposition Driver, Passenger, and 2nd Row Carpet as necessary to resolve factory installation issue. Do not replace Carpet that exhibits bulging or intrusion into front passenger footwell. Please assess and reposition Carpet to flush position. If Carpet repositioning is difficult, remove Kick Panel and maneuver Wire Harness as necessary
Associated Products (1)Associated Documents - October 28, 2015•Document ID: 10217375Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 1NV00LU5A$
- Date Added:
- August 8, 2022
- Manufacturer:
- DODGE
SummaryPart Description: CARPET ASSY - FLOOR Issue Description: Do not replace Carpet due to exposed floor pan or carpet white backing along the Sill or B-Pillar Trim. Please rake (rub) a plastic or non-abrasive tool (e.g. credit card edge) to relax the carpet backing and fibers such that fibers stand up and the carpet backing is no longer exposed. Replace Carpet if backing is still visible. Do not replace Carpet that exhibits bulging or intrusion into front passenger footwell. Please assess and reposition Carpet to flush position. If Carpet repositioning is difficult, remove Kick Panel and maneuver Wire Harness as necessary.
Associated Products (2)Associated Documents - October 28, 2015•Document ID: 10216137Service Bulletin/Repair InstructionsSTRUCTURE:FRAME AND MEMBERS; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 1NV00LU5A$
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryPart Description: CARPET ASSY - FLOOR Issue Description: Do not replace Carpet due to exposed floor pan or carpet white backing along the Sill or B-Pillar Trim. Please rake (rub) a plastic or non-abrasive tool (e.g. credit card edge) to relax the carpet backing and fibers such that fibers stand up and the carpet backing is no longer exposed. Replace Carpet if backing is still visible. Do not replace Carpet that exhibits bulging or intrusion into front passenger footwell. Please assess and reposition Carpet to flush position. If Carpet repositioning is difficult, remove Kick Panel and maneuver Wire Harness as necessary.
Associated Products (2)Associated Documents - October 28, 2015•Document ID: 10151718Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- 1NV00LU5A
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryPart Description: CARPET ASSY - FLOOR Issue Description: Do not replace Carpet due to exposed floor pan or carpet white backing along the Sill or B-Pillar Trim. Please rake (rub) a plastic or non-abrasive tool (e.g. credit card edge) to relax the carpet backing and fibers such that fibers stand up and the carpet backing is no longer exposed. Replace Carpet if backing is still visible. Do not replace Carpet that exhibits bulging or intrusion into front passenger footwell. Please assess and reposition Carpet to flush position. If Carpet repositioning is difficult, remove Kick Panel and maneuver Wire Harness as necessary.
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10217423Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 25-002-15 REV. B
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryP0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10217372Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- 68166105A$
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryPart Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual.
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10216185Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 25-002-15 REV. B
- Date Added:
- July 25, 2022
- Manufacturer:
- JEEP
SummaryP0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10216134Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN; ELECTRICAL SYSTEM:12V/24V/48V BATTERY
- Mfr Comm. #:
- 68166105A$
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryPart Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual.
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10151766Service Bulletin/Repair InstructionsENGINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- 25-002-15 REV-B
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryP0455/P0456 Set In The Powertrain Control Module (PCM) This bulletin involves replacing the evaporative emissions purge valve hose due to a split in the hose that will prevent the system from sealing. The customer may experience a Malfunction Indicator Lamp (MIL) while driving. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0455 EVAP System Large Leak ? P0456 EVAP System Small Leak
Associated Products (2)Associated Documents - October 21, 2015•Document ID: 10151715Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 68166105A
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryPart Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent a P1C86-14 DTC being stored in the electronic shift module (ESM). Failure to disconnect the battery before servicing the shifter may cause the P1C86-14 DTC to be set again. Clear the code before replacing the shifter. In the event a P1C86-14 DTC persist after following the above procedure, refer to 28 - DTC-Based Diagnostics, in the service manual.
Associated Products (2)Associated Documents - October 14, 2015•Document ID: 10217368Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- L0003157$$
- Date Added:
- August 8, 2022
- Manufacturer:
- DODGE
SummaryPart Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 [email protected], if you have further questions.
Associated Products (1)Associated Documents - October 14, 2015•Document ID: 10216130Service Bulletin/Repair InstructionsEQUIPMENT; EXTERIOR LIGHTING:TURN SIGNAL:BULBS
- Mfr Comm. #:
- L0003157$$
- Date Added:
- July 25, 2022
- Manufacturer:
- DODGE
SummaryPart Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 [email protected], if you have further questions.
Associated Products (1)Associated Documents - October 14, 2015•Document ID: 10151711Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:TURN SIGNAL
- Mfr Comm. #:
- L0003157
- Date Added:
- December 17, 2018
- Manufacturer:
- DODGE
SummaryPart Description: Turn Signal Bulb Issue Description: If the filament is broken proceed as normal for the parts return process. If the filament is not broken and does not function follow the process listed in this bulletin. If the customer complaint is (bulb inoperative) please change the bulb L0003157NAK and socket P/N 68224606AA and return together to the Quality Engineering Center (QEC) for analysis. It is very important to have both bulb and socket together for traceability. Email the last 8 of the VIN, mileage and send the part to the QEC. Contact Ryan Lucas- cell (248) 421-9535 [email protected], if you have further questions.
Associated Products (1)Associated Documents - October 9, 2015•Document ID: 10217400Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN; FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING
- Mfr Comm. #:
- 21-027-15 REV. C
- Date Added:
- August 8, 2022
- Manufacturer:
- JEEP
SummaryFlash: Transmission Shift Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience an erroneous Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find a Diagnostic Trouble Code (DTC) stored in the TCM memory. In addition, the following TCM calibration improvements are also available for vehicles equipped with the 845RE 8 speed transmission (Sales Code DFL). These improvements are listed per engine application. 3.0L Gas Engine (Sales Code EHD) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved upshift timing. ? Improved torque converter engagement. ? Improved shift timing during tow mode operation. ? Improved shift points during aggressive driving. ? Calibration improvement to correct bump feel during 2-1 downshift. ? Improved shift timing while in snow, base, and hill modes. 3.6L Gas Engine (Sales Code ERB) ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio. ? Improved 4-3 and 3-2 downshifts. ? Improved shift timing at higher altitudes. ? Improved shift timing while in sand mode. ? Calibration improvement for multi-gear downshift timing during passing maneuvers. ? Calibration improvement for intermittent delayed upshift.
Associated Products (2)Associated Documents