CAN-AM Spyder Service Bulletins
234 manufacturer communications on file.
- January 17, 2013•Document ID: 10052086Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- Mfr Comm. #:
- RC-2010-0015
- Date Added:
- May 15, 2013
- Manufacturer:
- CAN-AM
SummaryBRP: ON THE CAN-AM ROADSTER, THE FUEL CAP FAILS TO SEAL PROPERLY, ON FUEL TANK FILLER NECK, CAUSING FUEL VAPORS AND IN PRESENCE OF AN IGNITION SOURCE, MIGHT RESULT IN A FIRE AND NEEDS REPLACING. MODELS 2008-2012 CAN-AM SPYDER GS, RS, AND RT. *PE
Associated Products (5)Associated Documents - December 21, 2012•Document ID: 10185850Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- A-43672
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryFuel Vapor Canister Vent Hose Inspection/Replacement.
Associated Products (3)Associated Documents - December 21, 2012•Document ID: 10129603Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- Bulletin 2009-4
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryRevision #1 of warranty bulletin 2009-4 about engine performance optimization, informing dealers that this bulletin has been superseded by safety campaign bulletin 2010-12.
Associated Products (2)Associated Documents - December 21, 2012•Document ID: 10129601Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- Article 2012-13
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryArticle informing dealers of Safety Campaign 2012-13 - Fuel Cap replacement. The fuel cap may not seal properly the fuel tank filler neck. Fuel vapors in the presence of an ignition source could result in a fire.
Associated Products (5)Associated Documents - December 21, 2012•Document ID: 10129600Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- Article 2009-4
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryArticle informing dealers that the bulletin 2009-4 (Engine performance optimization) has been superseded by safety Campaign bulletin 2012-12.
Associated Products (2)Associated Documents - December 21, 2012•Document ID: 10129599Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- Article 2010-12
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryArticle discussing the safety campaign 2010-12 - Fuel Vapor Canister Vent hose inspection/replacement. In some circumstances, fuel vapors may exit the fuel vapor canister vent hose in the enclosed engine compartment. Fuel vapors in the presence of an ignition source could result in a fire. The proposed solution is to inspect the fuel vapor canister vent hose to determine if the proper hose is installed. replace and re-route the fuel vapor canister vent hose if required.
Associated Products (3)Associated Documents - December 13, 2012•Document ID: 10129602Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Posting 12-13
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryPosting informing the community that some of them may have seen an alert from Transport Canada regarding a recall on certain Spyder models. (recall 2012-13)
Associated Products (5)Associated Documents - December 12, 2012•Document ID: 10129598Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- Article 12-12
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) informing dealers that that a very limited quantity of the vehicles identified in the letter may have been produced with incorrectly routed electrical wires and brake lines. A very limited quantity of vehicles may have been produced with incorrectly routed electrical wires and brake lines. Dealership has received by regular mail and by e-mail the specific instructions concerning the inspection, repair and warranty procedures for this situation.
Associated Products (1)Associated Documents - December 5, 2012•Document ID: 10057417Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- TSB27-2015
- Date Added:
- May 27, 2015
- Manufacturer:
- CAN-AM
SummaryBOMBARDIER RECREATIONAL PRODUCTS 2013 CAN-AM SPYDER: INFORMATION REGARDING SPECIAL REPAIRS NEEDED ON AIR BOX.. *LJ
Associated Products (1)Associated Documents - December 3, 2012•Document ID: 10200277Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- Dlr40182
- Date Added:
- August 9, 2021
- Manufacturer:
- CAN-AM
SummarySpecial repair needed at PDI.
Associated Products (1)Associated Documents - December 3, 2012•Document ID: 10129597Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- Letter 12-03
- Date Added:
- March 5, 2018
- Manufacturer:
- CAN-AM
SummaryLetter to dealers informing them that a very limited quantity of the vehicles identified in the letter may have been produced with incorrectly routed electrical wires and brake lines. Instruction are provided.
Associated Products (1)Associated Documents - October 23, 2012•Document ID: 10126524Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- Article 10-23
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) in reference to quality warranty bulletin 2012-12. If the analog fuel gauge with stepper motor is installed with an old version of the cluster software or on a 2010 RT with a cluster which cannot be updated, the following situations may be observed: * Fuel level is displayed in the cluster digital display. * Wrong fuel level. * Even if the fuel tank is full, the digital display may show 3 bars and the analog fuel gauge shows half. * The "low fuel" indicator turns on when the fuel tank reaches half. * The temperature gauge needle indicates maximum (overheat) even if the engine is cold.
Associated Products (2)Associated Documents - October 23, 2012•Document ID: 10125476Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM
- Mfr Comm. #:
- Article 10-23
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryTechnical Service Tip (TST) in reference to quality warranty bulletin 2012-12. If the analog fuel gauge with stepper motor is installed with an old version of the cluster software or on a 2010 RT with a cluster which cannot be updated, the following situations may be observed: ? Fuel level is displayed in the cluster digital display. ? Wrong fuel level. ? Even if the fuel tank is full, the digital display may show 3 bars and the analog fuel gauge shows half. ? The "low fuel" indicator turns on when the fuel tank reaches half. ? The temperature gauge needle indicates maximum (overheat) even if the engine is cold.
Associated Products (2)Associated Documents - October 22, 2012•Document ID: 10126525Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- Bulletin 2012-12
- Date Added:
- December 22, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing the problem that analog fuel gauge needle does not have any dampening causing a variable fuel level reading. Replacing the analog fuel gauge with a new improved one (with stepper motor) is required. After fuel gauge installation, update the cluster software.
Associated Products (2)Associated Documents - October 22, 2012•Document ID: 10125477Service Bulletin/Repair InstructionsFUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM
- Mfr Comm. #:
- Bulletin 2012-12
- Date Added:
- December 14, 2017
- Manufacturer:
- CAN-AM
SummaryWarranty bulletin addressing the problem that analog fuel gauge needle does not have any dampening causing a variable fuel level reading. Replacing the analog fuel gauge with a new improved one (with stepper motor) is required. After fuel gauge installation, update the cluster software.
Associated Products (2)Associated Documents - October 15, 2012•Document ID: 10053963Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SB-420220413
- Date Added:
- December 7, 2013
- Manufacturer:
- CAN-AM
SummaryBRP: ON SOME MOTORCYCLES, THE WATER PUMP MECHANICAL SEAL HAS FAILED AND CAUSED A LEAKAGE FROM LINE WEEP HOLE (OIL OR COOLANT). MODEL SPYDER. NO MODEL YEAR. *PE
Associated Products (1)Associated Documents - October 8, 2012•Document ID: 10119472Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- Posting 10-08
- Date Added:
- October 15, 2017
- Manufacturer:
- CAN-AM
SummaryPosting stating that it has come to BRP's attention that water pump mechanical failure has risen in recent weeks. In the event you have a Spyder with a leak from the weep hole, please send information to BRP.
Associated Products (1)Associated Documents - June 19, 2012•Document ID: 10185875Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
- Mfr Comm. #:
- B2012-10
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryTo be performed at PDI on registered (sold) vehicles.
Associated Products (2)Associated Documents - June 19, 2012•Document ID: 10185873Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B2012-8
- Date Added:
- January 25, 2021
- Manufacturer:
- CAN-AM
SummaryTo be performed at PDI on unregistered (unsold) vehicles.
Associated Products (2)Associated Documents - April 10, 2012•Document ID: 10051563Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SB-SE-5
- Date Added:
- March 18, 2013
- Manufacturer:
- CAN-AM
SummaryBRP: THE SHIFT UP AND DOWN PADDLE FAILS TO WORK AND ADJUSTMENT IS NEEDED THAT MIGHT IMPROVE THE SITUATION ON CERTAIN MODEL MOTORCYCLES. MODEL SPYDER GS/RS. NO MODEL YEARS LISTED. *PE
Associated Products (5)Associated Documents