Audi S6 Service Bulletins (2006)
153 manufacturer communications on file.
- June 21, 2013•Document ID: 10224993Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10221966Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10123591Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- A011309 2014753-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Associated Products (165)Associated Documents - June 20, 2013•Document ID: 10123587Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191341 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (168)Associated Documents - May 29, 2013•Document ID: 10210650Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 37 13 07 2033658
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThis condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).
Associated Products (223)Associated Documents - April 1, 2013•Document ID: 10123901Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A001348 2002047-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
Associated Products (224)Associated Documents - March 25, 2013•Document ID: 10123882Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191335 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (168)Associated Documents - February 5, 2013•Document ID: 10124000Service Bulletin/Repair InstructionsBACK OVER PREVENTION: CAMERA SYSTEM
- Mfr Comm. #:
- A911374 2024323-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
Associated Products (112)Associated Documents - January 9, 2013•Document ID: 10216682Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 1335201004313
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryEngine oils that meet Audi Oil Quality Standards.
Associated Products (245)Associated Documents - January 1, 2013•Document ID: 10253418Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A6-S6-A
- Date Added:
- April 22, 2024
- Manufacturer:
- AUDI
SummaryAudi Delivery Guidelines.
Associated Products (50)Associated Documents - January 1, 2013•Document ID: 10253417Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A6-S6
- Date Added:
- April 22, 2024
- Manufacturer:
- AUDI
SummaryAudi Delivery Guidelines.
Associated Products (50)Associated Documents - October 24, 2012•Document ID: 10122766Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- A941292 2012749-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens. Damp air settles on the inside of a cold lens, which creates condensation. The headlight circulation system allows air from the outside to flow through the headlights. This open waterprotected ventilation system (needed for pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively cool areas, where the lens is cooled own by the air flow. Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end, with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.
Associated Products (149)Associated Documents - October 4, 2012•Document ID: 10122771Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- A911263 2021151-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11 ? 83 dated April 15, 2011. The customer may report that the illumination of the dash insert, the air conditioning control panel or the inside light flickers when briefly pressing the accelerator in P or N or when shifting down while driving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off and the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly increased voltage, and the lights mentioned above may briefly flicker. This characteristic is caused by the alternator design and is a normal condition of the vehicle.
Associated Products (89)Associated Documents