Audi S6 Service Bulletins (2008)
339 manufacturer communications on file.
- June 21, 2013•Document ID: 10224993Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10221966Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10123591Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- A011309 2014753-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
Associated Products (165)Associated Documents - June 20, 2013•Document ID: 10123587Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191341 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (168)Associated Documents - May 29, 2013•Document ID: 10210650Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 37 13 07 2033658
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryThis condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).
Associated Products (223)Associated Documents - May 29, 2013•Document ID: 10052307Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL
- Mfr Comm. #:
- 37-13-07
- Date Added:
- July 10, 2013
- Manufacturer:
- AUDI
SummaryAUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS. *JS
Associated Products (157)Associated Documents - April 1, 2013•Document ID: 10123901Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A001348 2002047-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
Associated Products (224)Associated Documents - March 25, 2013•Document ID: 10123882Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A191335 2025303-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Associated Products (168)Associated Documents - February 18, 2013•Document ID: 10251023Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 44134220225637
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (486)2026 Audi S e-tron GT2025 Audi A32025 Audi A42025 Audi A4 allroad2025 Audi A52025 Audi A62025 Audi A6 allroad2025 Audi A72025 Audi A82025 Audi e-tron2025 Audi e-tron GT2025 Audi e-tron Sportback2025 Audi Q32025 Audi Q42025 Audi Q52025 Audi Q5 e2025 Audi Q72025 Audi Q82025 Audi R82025 Audi RS 3+ 466 moreAssociated Documents - February 18, 2013•Document ID: 10250475Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 4413362022563
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (144)Associated Documents - February 18, 2013•Document ID: 10123987Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- A441336 2022563-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 44 number 13-35 dated January 18, 2013. Customer feels vibration from 55 - 80 mph (88 - 128 km/h) in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not result in any handling concerns or loss of vehicle control.
Associated Products (90)Associated Documents - February 14, 2013•Document ID: 10250423Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 0113692028344
- Date Added:
- February 20, 2024
- Manufacturer:
- AUDI
SummaryIdle speed characteristic during cold start
Associated Products (42)Associated Documents - February 14, 2013•Document ID: 10123969Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
- Mfr Comm. #:
- A011369 2028344-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300°C (572°F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.
Associated Products (43)Associated Documents - February 5, 2013•Document ID: 10124000Service Bulletin/Repair InstructionsBACK OVER PREVENTION: CAMERA SYSTEM
- Mfr Comm. #:
- A911374 2024323-
- Date Added:
- November 17, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
Associated Products (112)Associated Documents - January 18, 2013•Document ID: 10251018Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 44133520225635
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummarySteering wheel shimmy, vibration and/or oscillation
Associated Products (144)Associated Documents - January 9, 2013•Document ID: 10216682Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 1335201004313
- Date Added:
- August 1, 2022
- Manufacturer:
- AUDI
SummaryEngine oils that meet Audi Oil Quality Standards.
Associated Products (245)Associated Documents - January 1, 2013•Document ID: 10253418Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A6-S6-A
- Date Added:
- April 22, 2024
- Manufacturer:
- AUDI
SummaryAudi Delivery Guidelines.
Associated Products (50)Associated Documents - January 1, 2013•Document ID: 10253417Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A6-S6
- Date Added:
- April 22, 2024
- Manufacturer:
- AUDI
SummaryAudi Delivery Guidelines.
Associated Products (50)Associated Documents - December 7, 2012•Document ID: 10122674Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- A901238 2032113-
- Date Added:
- November 8, 2017
- Manufacturer:
- AUDI
SummaryThe customer may state that the outside ambient temperature display is incorrect. To achieve a smoothening effect of the displayed outside ambient temperature, the value shown does not instantaneously follow the temperature sensor measurement. The display will not change faster than 4° F (2° C) per minute. This concept applies to both falling and rising temperatures. A programming strategy is also implemented to avoid incorrect readings on a parked vehicle, due to the temperature sensor being affected by outside influences such as radiant heat from the engine bay, elevated road surface temperatures, etc.
Associated Products (90)Associated Documents - October 29, 2012•Document ID: 10063095Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SB-01-12-57
- Date Added:
- April 26, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (31)Associated Documents