Audi Q7 Service Bulletins (2008)
458 manufacturer communications on file.
- July 22, 2013•Document ID: 10066882Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 2017325/7
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (2)Associated Documents - July 22, 2013•Document ID: 10251015Service Bulletin/Repair InstructionsSUSPENSION; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 43132020173257
- Date Added:
- March 4, 2024
- Manufacturer:
- AUDI
SummaryNo communication with 34 module, vehicle lowers after engine start, air suspension warning lights blink
Associated Products (2)Associated Documents - July 22, 2013•Document ID: 10243790Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition45
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (178)Associated Documents - July 22, 2013•Document ID: 10124512Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- A481346 2021191-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 40 number 09-06 dated August 3, 2009. Customer hears squeaking noises when turning or maneuvering the steering wheel. The folds of the outer CV joint rubber boots can touch each other when the steering wheel is turned.
Associated Products (34)Associated Documents - July 22, 2013•Document ID: 10124502Service Bulletin/Repair InstructionsSUSPENSION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A431320 2017325-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 43 number 11-07 dated November 23, 2011. Immediately after the vehicle is started, the air suspension lowers the vehicle to its lowest possible position. The air suspension warning light blinks. An ignition off/on cycle will reboot the system and restore the functions.DTC 01487 (System function test incorrect signal sporadic) is stored in the level control system control module, J197 (address word 34).
Associated Products (2)Associated Documents - July 19, 2013•Document ID: 10226502Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:ACCELERATOR PEDAL
- Mfr Comm. #:
- 37130920287152
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryRough gear changes both when accelerating and slowing down
Associated Products (92)Associated Documents - July 19, 2013•Document ID: 10210652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS
- Mfr Comm. #:
- 37 13 09 2028715
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryAfter a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
Associated Products (101)Associated Documents - July 19, 2013•Document ID: 10124499Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- A371309 2028715-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
Associated Products (100)Associated Documents - July 19, 2013•Document ID: 10053883Service Bulletin/Repair InstructionsSTEERING:GEAR BOX (OTHER THAN RACK AND PINION)
- Mfr Comm. #:
- TSB-37-13-09
- Date Added:
- December 2, 2013
- Manufacturer:
- AUDI
SummaryAUDI: IN SOME VEHICLES, THE CLUTCHES, AFTER HAVING TORQUE CONVERTER, COMPLETE GEARBOX REPLACEMENT OR MECHATRONICS, MUST ADAPT TO NEW COMPONENTS WITH GRADUAL MOVING OF CLUTCH LININGS IN MOST DIVERSE LOAD CONDITIONS. MODELS 2004-14, A3, TT, Q7, A4, A5, A6, A7, A8, Q5, S4, S5, S6, S7, RS5. *PE
Associated Products (87)Associated Documents - July 18, 2013•Document ID: 10066955Service Bulletin/Repair InstructionsSTRUCTURE:BODY:TRUNK LID
- Mfr Comm. #:
- 2033675/4
- Date Added:
- May 23, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - July 18, 2013•Document ID: 10124514Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK
- Mfr Comm. #:
- A551331 2033675-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryDTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46). In order for the vehicle to receive a proper rear lid status signal when the lid is operated, the paddle switches on the rear sill trim must contact the opposing lid latch points uniformly. When the rear lid is opened, the paddle switches change state and the comfort system central control module 2, J773, will read G525 and G526. It will then communicate to the comfort system central control module, J393.
Associated Products (8)Associated Documents - July 16, 2013•Document ID: 10124525Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A911392 2030947-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 12-61 dated September 25, 2012. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone gets the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call assuming the phone is not responding.
Associated Products (112)Associated Documents - July 12, 2013•Document ID: 10068713Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 2034341/1
- Date Added:
- June 2, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (8)Associated Documents - July 12, 2013•Document ID: 10124577Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A941323 2033675-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 94 number 13-17 dated May 22, 2013. DTC 03073 (Closed Rear Lid Sensor - Incorrect Signal) may be stored in the comfort system central control module, J393 (address word 46). In order for the vehicle to receive a proper rear lid status signal when the lid is operated, the paddle switches on the rear sill trim must contact the opposing lid latch points uniformly. When the rear lid is opened, the paddle switches change state and the comfort system central control module 2, J773, will read G525 and G526. It will then communicate to the comfort system central control module, J393.
Associated Products (8)Associated Documents - July 10, 2013•Document ID: 10124574Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- A961367 2019260-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 96 number 12-37 dated June 11, 2012. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer's door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 Model Years 2005 - 2006 and A3 Model Year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer's HomeLink® opener system is using an alternate code. The handheld transmitter's programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
Associated Products (100)Associated Documents - July 8, 2013•Document ID: 10124505Service Bulletin/Repair InstructionsPARKING BRAKE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- A461347 2034387-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report sporadically hearing the parking brake being actuated after the vehicle has been switched off. If the customer does not identify the sound as the sound of the parking brake being actuated, he or she may simply complain of hearing noises from the rear brakes. Ignition is switched off. Steering is locked. Park is selected. Parking brake is not engaged. If the electro-mechanical parking brake is not operated for some time, the free play between brake pads and brake discs increases because of normal brake pad wear. The parking brake control unit performs an automatic correction about every 621 miles (1,000 km). On A8 models, the brake pad thickness is also calculated.
Associated Products (125)Associated Documents - July 1, 2013•Document ID: 10243787Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition42
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (282)Associated Documents - June 21, 2013•Document ID: 10228314Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- January 3, 2023
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10224993Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- October 31, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents - June 21, 2013•Document ID: 10221966Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- 01130920147538
- Date Added:
- September 26, 2022
- Manufacturer:
- AUDI
SummaryThe use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Associated Products (247)Associated Documents