Service Bulletin

2020 Jeep Gladiator 4WD System Warning TSB 08-358-26

Owners of 2020 Jeep Gladiator vehicles may experience 4WD system warning lights, MIL illumination, or DTC C147B-92. Technical Service Bulletin 08-358-26 provides a software update for the Drivetrain Control Module (DTCM) to resolve these issues.

ByAhmet Topcu — Founder & Editor-in-ChiefAutomated summary2020 Jeep Gladiator
2020 Jeep Gladiator — manufacturer_communication document image 1
Source: NHTSA manufacturer_communication 11038511
C147B-9208-358-26NHTSA 11038511Front Axle Disconnect Sensor Performance or Incorrect Operation4WD system warning lightsMalfunction Indicator Lamp (MIL) illuminationvehicle does not engage 4WD properlyDTCMDrivetrain Control ModuleJeep Gladiator 4WD system warning DTC C147B-92

Owners of 2020 Jeep Gladiator vehicles may encounter issues with their four-wheel drive (4WD) system, indicated by warning lights and a Malfunction Indicator Lamp (MIL) illumination. Technical Service Bulletin (TSB) 08-358-26, issued on October 9, 2026, details a software update for the Drivetrain Control Module (DTCM) to resolve these concerns. This update applies to Jeep Gladiator models equipped with specific 4WD sales codes, including Command-Trac Part Time (DHN), 2.72:1 Select-Trac Full Time (DHP), 4:1 Rock-Trac HD Part Time (DHW), and 4:1 Rock-Trac HD Full Time (DHF).

The 2020 Jeep Gladiator 4WD system warning is a critical issue that can affect vehicle performance and safety. This bulletin is applicable to various global markets, including North America, South America, Enlarged Europe, Middle East & Africa, India & Asia Pacific, and China.

Symptoms

Owners might observe a range of symptoms indicating a problem with the 4WD system. The primary indicator is a Malfunction Indicator Lamp (MIL) illumination on the instrument cluster. Additionally, customers may report seeing "4WD system warning lights," "service messages," or "flashing indicators" displayed in the Instrument Panel Cluster (IPC).

Another significant symptom is the vehicle's inability to engage 4WD properly, which can affect off-road capability and traction in challenging conditions. These symptoms collectively point to an issue with the Drivetrain Control Module.

Fault Codes / DTCs

When diagnosing the 2020 Jeep Gladiator 4WD system warning, technicians will likely find a specific Diagnostic Trouble Code (DTC) stored in the vehicle's system. The relevant DTC for this issue is:

  • C147B-92: Front Axle Disconnect Sensor Performance or Incorrect Operation

This code indicates a problem with the front axle disconnect sensor, which is managed by the DTCM.

Diagnosis / Trigger Conditions

Diagnosis for the 2020 Jeep Gladiator 4WD system warning involves verifying the customer's reported symptoms and checking for the presence of DTC C147B-92. Technicians use a Scan Tool, such as wiTECH, along with appropriate Diagnostic Procedures available in DealerCONNECT/Service Library, to confirm that all related systems are functioning as designed. If the customer's concern matches the symptoms listed in the bulletin, the repair procedure can be initiated.

Important Warnings

Technicians performing the DTCM reprogramming must adhere to specific guidelines to ensure a successful update:

  • Battery Voltage Stability: Install a battery charger to ensure the battery voltage remains between 13.2 and 13.5 volts during the flash process. It is crucial not to allow the charging voltage to climb above 13.5 volts.
  • Interrupted Flash: If the flash process is interrupted or aborted for any reason, it must be restarted from the beginning.
  • SA Market Specifics: For vehicles in the South American (SA) market only, it is not necessary to send DID-I or DID-A after applying this TSB.

Repair Procedure Summary

The repair for the 2020 Jeep Gladiator 4WD system warning involves a software update to the Drivetrain Control Module (DTCM). The procedure is straightforward and includes the following steps:

  1. Prepare for Reprogramming: Connect a battery charger to the vehicle to maintain stable voltage between 13.2 and 13.5 volts throughout the process. This prevents interruptions that could damage the module.
  2. Reprogram DTCM: Use the wiTECH Diagnostic Application to reprogram the DTCM with the latest available software. If any issues arise during the flashing process, technicians are advised to submit a ticket to the Helpdesk via the Help menu.
  3. Clear DTCs: After successful reprogramming, clear all Diagnostic Trouble Codes that may have been set in any module. The wiTECH application will automatically present all DTCs for clearing once the flash is complete.

Required Tools or Parts

The primary tool required for this repair is the wiTECH diagnostic system or an equivalent scan tool capable of performing module reprogramming.

Owner Action

If you own a 2020 Jeep Gladiator and are experiencing a Malfunction Indicator Lamp (MIL) illumination, 4WD system warning lights, or if your vehicle is not engaging 4WD properly, you should contact your authorized Jeep dealership. Inform them about the symptoms you are experiencing and mention Technical Service Bulletin 08-358-26.

This repair, which involves reprogramming the DTCM, is typically covered under warranty provisions. The estimated labor time for this procedure is approximately 0.3 hours. The dealership will use failure code CC (Customer Concern) if your symptoms align with those described in the TSB.


Source: NHTSA ID 11038511

Gallery

1 image

What Jeep Gladiator owners report

Counted from the records in our database across 7 model years.

996
Owner complaints
18
Recalls
1,180
Service bulletins
25
Crashes reported
30
Fires reported
22
Injuries reported

The 2020 model year

484 complaints, the 1st most of 7 model years on file. Owners reported 11 crashes, 7 fires and 6 injuries for this year, which also has 7 recalls on file.

Electrical System, the system this article covers, accounts for 289 of 996 complaints (29%), including 183 for 2020.

Complaints by model year

Model years with the most complaints for the Jeep Gladiator
2020484
2021292
2022120
202357
202423
202517
20263

Most-reported systems

  1. Steering — 330
  2. Electrical System — 289
  3. Power Train — 158
  4. Engine — 130
  5. Suspension — 106

Latest recalls for the 2020 model year

  • 24V652000 — Electrical System (Sep 2024)
  • 23V116000 — Power Train (Feb 2023)
  • 21V028000 — Power Train (Jan 2021)
All 2020 recalls →

Recent owner reports about electrical system

Instrument Panel Failure. The center LCD screen that displays speed, tachometer, oil temp, coolant temp, oil pressure, battery voltage, and transmission temps, fuel gauge, tire pressure readings, warning messages, and many other things just stopped working.

2020 Jeep Gladiator owner, Sep 2026

the driver instrument cluster has failed. completely blank no fuel gauge no odometer. was told this vin is not covered under the recall even though this is the issue behind the recall.

2020 Jeep Gladiator owner, Aug 2026
Read owner complaints →

Complaints are owner reports filed with NHTSA. They are unverified, and counts depend on how many vehicles were sold, so they are not a failure rate.

Related Articles

2018-2020 Jeep Wrangler / Gladiator Blank IPC Warranty Extension

Stellantis Technical Service Bulletin (TSB) 08-298-26 REV. B addresses a blank electronic vehicle information center (EVIC) in the Instrument Panel Cluster (IPC) for 2018-2020 Jeep Wrangler and Gladiator vehicles. This issue, caused by a printed circuit board failure, is now covered by a warranty…

2022 Jeep Compass Health Check: Service Bulletins and Common Issues

While the 2022 Jeep Compass has no open recalls or owner complaints, numerous manufacturer service bulletins address issues like Adaptive Cruise Control malfunctions, fuel injector leaks, and various software-related problems. This guide details potential concerns and recommended actions for owners.

2026 Jeep Wrangler Health Check: Recalls and Service Bulletins

The 2026 Jeep Wrangler has faced one safety recall concerning child seat anchors and numerous manufacturer service bulletins. These bulletins address a range of issues, from electrical system malfunctions like inoperable garage door openers and heated steering wheels to steering alignment and body…

2025 Jeep Wrangler Health Check: Recalls and Bulletins

The 2025 Jeep Wrangler faces a recall for a potentially inoperable TPMS warning light (25V527000), which could increase crash risk. Owners should also be aware of numerous service bulletins covering engine misfires, transmission warnings, heated steering wheel issues, and driver assistance system…

2023 Jeep Wrangler Health Check: Recalls and Bulletins

The 2023 Jeep Wrangler faces a significant safety recall (24V111000) concerning its defrost system, which could impair driver visibility. Beyond this, numerous technical service bulletins address issues ranging from engine misfires and rough idle to heated steering wheel malfunctions and filiform…

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...